1 / 2
Magnetic Clip for ResMed N20 Headgear — zdjęcie 1
1 / 2

Magnetic Clip for ResMed N20 Headgear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for cracked magnetic clips on ResMed N20 Headgear, they often crack from magnet contact.

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a great, simple clip replacement for the attachments for this ResMed headgear. Printed and using it on mine with the salvaged magnet (seems to be about 10mm x 2mm).

Slicing and printing tips:

  • Requires 0.1 mm layers or the magnet will not be enclosed properly.
  • Add a filament change/pause just after the magnet pocket is done, insert the magnet and resume the print.
  • I needed to slow my print way down (did 25% on mine) for the layer after the pause, I had challenges getting the bridging to hold together at full speed.
  • I printed in PETG, I think it'll hold up to the magnet impact better.

Magnet direction does matter! Test it with the headgear before inserting during the print!

Tagi