1 / 2
Magnetic Clip for ResMed N20 Headgear — image 1
1 / 2

Magnetic Clip for ResMed N20 Headgear

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for cracked magnetic clips on ResMed N20 Headgear, they often crack from magnet contact.

Rating
0 / 5
Likes
3
Downloads
27
Makes
0
Views
157
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a great, simple clip replacement for the attachments for this ResMed headgear. Printed and using it on mine with the salvaged magnet (seems to be about 10mm x 2mm).

Slicing and printing tips:

  • Requires 0.1 mm layers or the magnet will not be enclosed properly.
  • Add a filament change/pause just after the magnet pocket is done, insert the magnet and resume the print.
  • I needed to slow my print way down (did 25% on mine) for the layer after the pause, I had challenges getting the bridging to hold together at full speed.
  • I printed in PETG, I think it'll hold up to the magnet impact better.

Magnet direction does matter! Test it with the headgear before inserting during the print!

Tags