Resmed compatible CPAP essential oil infusion adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In hose adaptor for use with 22mm (od) CPAP mask. Tested with F30i elbow to Resmed standard heated hose.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Oil infusion hose adapter for use with essential oils (great during times of sickness).
22mm OD mask and hose compatible.
Oil infusion pads cut to size from PM2.5 mask inserts- fit in slot perfectly. Add one or two drops of oil each use, replace pads when required.
See images for further details.
These are often sold online but there were no previously designed equivalents on any platform that I could see and the online ones are usually very expensive.
Have been successfully using a homemade infuser for several years now.
Print in ABS at 0.15mm layer height with 100% infill. No supports required, may have some strands come free during print, but I haven't had an issue just trimming those after printing.
Print with slots on the bed side and using a brim can help with bed adhesion.
Also works with PLA but not as durable long term.