Ultralight Stealthburner CPAP Main Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A main body that removes all the geometry you no longer need after a CPAP upgrade for lighter weight!
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 218
- Wydruki
- 0
- Wyświetlenia
- 1866
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
There are a few CPAP adaptors available for Stealthburner, but they typically either completely alter the look of Stealthburner, or they leave behind unnecessary features in the model like provisions for a 5015 blower fan. I've shed a significant amount of weight from the printed parts by removing almost all of the unnecessary geometry in the Stealthburner main body. I have also modified the air passage so it is a straighter shot from the CPAP hose to the part cooling ducts.
The trade off is that you will need to MANUALLY add a support only to the area illustrated in the pic above (Orca slicer can do this, I'm not sure what else can), I haven't tried to print without supports in the one corner, I don't think it'll go that well, prove me wrong! You will also need 2ea 5x4x3 heatserts and they are tricky because there is no straight shot to them; it's doable. 2ea M3x6mm bolts are required to fasten the hose adaptor to the body.
I am still testing mine, but I've gotten a mainbody to be less than 20g.
The settings I use are as follows:
2 Walls
2 Top and bottom layers
10% gyroid infill