Liczymy pasujące modele…
The perfect spot for googly eyes is, unfortunately, right over the bottom two screws on the Stealthburner! Since I need screw access, I never glue them on. I've taken apart my toolhead a ridiculous amount of times recently and the eyes'…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena jednego wariantu
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…
To fit the BLTouch on the StealthBurner on my BLV MGN Cube I made this simple mount. It attaches to the ADXL mount. Set the following offsets if you use Klipper: [bltouch] … x_offset: -40.9 y_offset: -5.6 … To attach the mount to the…
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
I took the factory hotend mount model and remodeled it to accept the X gantry Voron Clockwork 2 left and right mounts. Since the SV06 has its own probe and uses sensorless homing I removed unneeded geometry for belts, probe mounts etc.…
To use this model u might have to get a slightly longer belt since the stock ender 3 belt might be a bit to short. I recommend a high quality Gates Belt. The carriage is a bit thicker than normal so you can use the hartk pcb without…
2023-06-16: Updated with stl and step for Mini SB released with v0.2r1 on June 10th. Accent parts are now 0.2mm thick instead of 0.4mm. Less hassle with one layer accents when using the 2 virtual tool head method. Remix of the great work…
Phaetus Dragon HF Mount for Stealthburner Why not use the P-DRG Mount? I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's…
This model is a redesigned Voron Stealthburner X Carriage mount for the Flying Bear Reborn 2. The major goal of this redesign was to be able to use the wide Stealthburner ecosystem on the Reborn 2. Further goals were to preserve as much…
I made this Design to glue on the background of my VORON 2.4. The Design is made of Parts of the Voron 2.4, the Stealthburner and even has Parts of TAP included. Please note, that all Parts dont stick toghetter after print. But you can…
Hello there :D I designed a mount for BTT Eddy probe, to fit in CNC Milled Carriage The aluminium carriage that I bought is from Funssor Hardware: x4 M3 8mm x2 M3 30mm x2 Heat Insert Voron style or chinese one (Od 4) --- Commercial Use…
Use either the separate stls or the multibody to print the parts in different colors. The accents are 0.45mm thick so they should be at least two layers thick.
Mini Stealthburner variation I made for the Rook 2020. Toolhead mounting bracket mounts directly to the MGN9C carriage. Mounting bracket has integrated mounting for E3D v6 or other hotends that use the same style mounting. The fan ducts…
I recently switched to Voron Stealthburner toolhead from Voron Afterburner. After that switch, I started to experience clogs and I assumed the clogs were a result of insufficient cooling of the Dragon hotend. Despite using a fan that…
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
Stealthburner printhead for Phaetus DropEffect XG hotend
Remix of the StealthBurner x-carriage mount for Voron Switchwire that provides a mount for Beacon 3Ds new Eddy Current Surface Scanner. The modification to the original from the StealthBurner GitHub repo provides a spot for a threaded…
This modification for the Voron Mini Stealthburner involves replacing the original extruder mechanism with a mount for the Bondtech LGX Lite extruder. Additionally, one of the side cowlings has been adapted to accommodate a Klicky PCB…
Project done in collaboration with @Print3DPilot We wanted to upgrade an Anet A8 Plus to a Stealthburner. We initially thought the Voron Legacy part would be a drop in fit but the distance between linear rod centres were 40mm vs ~50mm on…
To be mounted in place of ADXL345 (as I use my own on-nozzle mount for input shaper calibration anyway - see https://www.printables.com/model/582444-adxl345-nozzle-mount :) OnShape:…
After installing the Afterburner as a direct extruder on the HevoRS for over 3 years, it was time for something new. I wanted to install the stealth burner without making any major changes to the “Voron parts”. The result is this HevoRS…
While making the required toolhead modifications for my ERCF V2 build, I realized that the ECAS connector I had installed kept “popping out” from the pressure in the extruder while loading filament. The ECAS was just not sitting tightly…
It's a redesigned model of original hotend assembly, but it was cooling the heater block instead of blowing just at tip of the nozzle. Might improve cooling performance of regular 5015 fan stock system, but has been tested only on CPAP…
Printing: The logo and Hex design are technically 7 different objects and should be separated out under the Objects in your slicer of choice. Logo/Hex pattern is 1 0.2mm layer deep. Model is already oriented in the .stl.
NOTE: this was only tested using the following Neptune 3 Pro / Neptune 4 Y Axis Linear Rail Kit ( AliExpress ), so YMMV This mod may also work for Neptune 4, but I do not own one to test with With toolheads such as Stealthburner, one…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
This mount comes to you courtesy of Tinkers Paradigm as we embark on a BLV Cube/Trident build to be published on our Youtube Channel. This is a modification of the base design to allow mounting and use of a Cartographer3d Probe and…
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
Magnetic dock for the Stealthburner with a Dragon hotend for my Stealthchanger. Based on EasterWorks' model on Github. Per GitHub recommendations: Current options allow for both Revo and Repido 2 hotends (credit to nicksnoopy on Discord…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
This is a reupload of the official Phaetus Rapido X toolhead mounts for the Voron Stealthburner. While these files are publicly available on the official Phaetus GitHub , they can be difficult to track down if you aren't actively digging…
Maturity: Very Good 5 prototypes. In use since 2024/10. A mounting to combine: Stealthburner LGX (not to be mistaken to the unsupported later LGX lite) Nitehawk-SB (and its fan PCB) Umbilical I would call it Casimodo due to its bump. I…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
Project done in collaboration with @Print3DPilot We wanted to upgrade an Anet A8 Plus to a Stealthburner. We initially thought the Voron Legacy part would be a drop in fit but the distance between linear rod centres were 40mm vs ~50mm on…
I edited @SettlingAbyss_572842's model to make it more printable (fixed the impossible overhang, removed eyebrows and all text, move some geometry a tiny bit to remove thin-ish walls). I also removed the TAP clearance features since I…
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
Mount for the E3D PZ Probe PCB for use with Stealthburner with a Cartographer3D CNC carriage. It can also be used with a printed carriage that you can get from Gusk's model . This model has a shallower angle for the PCB than the original…
this was patched together from 2 files…i made it in mins so it sucks…. but the one i found wasnt actually for pg7 it was too small…
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…
only one piece, will need some supports additional hardware: 2x M3x16 screws 2x M3 nuts 2x M2x8 screws
Voron StealthBurner has no filament sensor, let's add one. In case you have a MK3S's filament sensor retired or spare, we can use it to make a filament sensor for stealthburner. Voron stealthburner…
A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. This model was…
I am not a fan of how the 5015 is ripped apart, it alters the optimized flow. I have plenty of 4015 fans that fit in the space leaving the mounts for the secondary board of the ebb sb2209 can bus. I have also added one for a toolless…
This is an amalgamation/remixes of many files from various creators put together to work with stock motor and hotend for the Ender 5 & Plus. Needs a 5015 part cooling fan. DirectDrive: https://www.thingiverse.com/thing:4710174 Extruder…
StealthBurner phaestus Dragon printhead mod with more Airflow rather than pressurized but hotend.
I adjusted the Clockwork 2 extruder so that the Mellow DIY Integrated Shaft Direct Drive ISG Gear Kit is perfectly positioned. Mellow's hidden hint that something needs to be removed from the guilder helps the gears to run in principle,…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
A simple remix to help keep the fans in place ("fan-saver") for the Revo Micro mount for the Mini Stealthburner toolhead. Print with recommended Voron settings.
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
Since I love the Stealthburner but its cooling performance is poor, here's my version. For Rapido and Dragon UHF hotends. As hotend fans, the 4010 works at 100% and the 4020 at around 65-70%. Printed in 0,2 mm Layer hight with PC…
I made this model to have the same advantages of a stealthburner on a smaller printer, like a Voron 0.2 or a Micron. The hole in the model is for the wires of an inductive probe, if you were to use one. I am going to design another…
Have redesigned an original Voron Hot end Carriage to fit Crealitys Spider series Hot Ends Ive A Spider 2 and Spider 3 in this design requires a few M3 insets 2x20mm flat head bolts mine are ABS per voron print guide 45 mins back 1.5 hrs…
This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…
Modified Phaetus Dragon High Flow mount for Stealthburner v2.2 with Filametrix Mod . update on 8/5/2026 add FilamATrix Mod
more edits 4/26/24: redid the cover for the spider v1, now with a slightly deeper spot for the part cooling fan (tested and fit okay for me, though a piece of tape to help where the duct fits will help - the orbiter 2 is just too long to…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
I designed this brand new fan duct because I found my Voron 2.4 with Stealth burner is seriously lack of cooling . Moreover, as I really found disassembling my print head from time to time is truly annoying and troublesome , I designed…
CR Touch Mount for Voron Stealthburner ADXL Mount for V6 Hotend. Y= -1,093mm X= -44,337mm
This toolhead for the Stealthburner is for the Nova hotend. I have tested it on my Voron and it works nicely.
Upgrade to Stealthburner toolheads on the Tenlog D3Pro
What's an UHF without a vulcano nozzle? This model works just like the Rapido UHF, which uses an extender (expensive nut) for higher flowrates and properly heated filament.. In order accomondate the longer length I've adapted the model of…
This model allows you to partially upgrade your Voron 2.4 r1 to r2 by upgrading to the Stealthburner hotend but keeping the clockwork1 extruder. This part has the same low-poly esthetic of Stealthburner and helps hiding the rounder CW1.…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
I have a couple Voron printers. I have a couple other printers of different types. Maintenance is easier when they're more standardized, so I have all of my printers standardized to the Stealthburner. BOM requirements: a bunch of regular…
This is an enforced version of the Voron Stealthburner latch that for the ECAS version has a very thin part that easily breaks. On the the picture, is the original latch thinned to make space for the ECAS shown broken. To prevent…
Print using standard Voron printed parts settings.
BOM: Same with original model. You might require to replace one of the square nut with normal nut. How To: Remove the supports from REAR part. They should came out easily. [3 pieces in total.] Slide hotend to rear part. Put nut for the…
Please see the original model for description regarding the Stealthburner mount. As for the Klackender probe and how to use it, you can find all the instructions here: https://www.printables.com/model/332025-klackender-probe I can not add…
This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF. The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air…
I'm in processing make over for my Ender 3 Pro. Make it look nicer and more reliable that's why i came up with this model. BOM: 1. You might need longer belt for this about 20mm (my was cutted before so it was little short but i did…
Works with any faceplate, position it 90 degrees to plate so its standing tall and then add the parts to the model Top screws is a part so position it to a standard faceplate setting like picture#1 The modifier pins is a negative and…
Mount for the PIS (Portable Input Shaper). Use heat insert, 3x40mm and 3x5mm screws Wide and narrow version available.
Stealthburner endoscope mount with holes for M3 screws
StealthburnerをKingroon KP3S Pro V2に取り付けられるようにするためのパーツです。 既存のモデルは、z軸のセンサーが取り付けられず、y軸方向に分厚いので新しく作り直しました。 あんまり検証していません。
This is a stealthburner modified to have a v2 of the 3do nozzle camera and the v2 of knomi. Tested with standard camera need someone to test camera with leds.
With this piece you can use a regular CW2 extruder without any modification. There are other models available that modify the printable parts of CW2 and those are probably a better option, but if you already printed/bought the original…
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
The Voron Trident doesn't have a lot of head room above the Stealthburner unless you add a top hat. When I installed the CPAP Stealthburner for the Knomi v.2 my CPAP hose was pressing against the top acrylic and dragging causing many…
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
I needed the stealthburner to fit volcano size nozzle and filametrix.
For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…
Hi, this is my version of the Voron Stealthburner Mount for the Artillery Genius. It fits on the factory mountplate. 6x M3 Heat inserts - for the Stealhburner 2x M3 Heat inserts - secure the PCB mount to the adapter 2x M3x8 Bolts - attach…
There are several versions of the StealthBurner mount to accommodate different electronics, with or without the dragchain mount. The Roto cover is a single printed part that includes all the necessary mounting features to integrate into…
Was wanting an Orbiter extruder mount with toolhead sensor that would allow for the Filametrix filament cutter arm. I took sorted's mount and just added a cut out to allow for the movement of the arm. For the toolhead sensor, a ¼" (6.35…
I have a Voron Trident and wanted to add CPAP to my Stealthburner with KNOMI 2. I am using the most recent Stealthburner + KNOMI face with CPAP that BTT released. I had some 22mm hose laying around and wanted to use it but everything is…
The wires of the probe are a bit thick so I had to shave away some material where the hotend assembly and the extruder base meet.
Electronics in the Stealthburner runs very hot, so I implemented some cooling cutouts in hopes to extend the life of the tool head components. it is printing reasonably easy, with the Voron recommended settings. I saw the temperature…
Made with inspiration of https://www.printables.com/model/562384-voron-mini-stealthburner-ercf-filament-sensor , tuned the design for a better fit (original one didn't work)
Mounting bracket for umbilical with a PG7 mount for Stealthburner / Clockwork 2. Puts the end of the cable in a reasonable spot for an LDO Nitehawk SB. Easiest to print upside down.
When upgrading my Trident's extruder to an LGX lite, the files I used didn't include a cable bridge (was a remix itself), found the file I have remixed but that also needed a few changes and here we are.
The hotend specific parts are not included . Any feedback on my print settings is welcome. (the speeds are set very high for a klipper printer so you may need to turn them down)
These toolhead boards get hot, crazy hot, especially the BTT SB2209 RP2040. Before it burns up I decided to add active cooling. I initially made one with a 3010 fan which took the temp down to ~65-70 depending on print time which doesn't…
![[REMIX] Bambulab Toolhead (or clone) for Stealthburner](https://media.printables.com/media/prints/755344/images/5892339_eaac5434-730a-451e-a1df-0167f2a136a5_a9006492-96d8-4249-a4d0-040415df45b6/whatsapp-image-2024-02-07-at-180928_f54d0840.jpg)
