Phaetus Dragon HF Printhead / Mount for Stealthburner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Phaetus Dragon High Flow mount for Stealthburner. This design accounts for the HF's extended melting zone.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 514
- Wydruki
- 1
- Wyświetlenia
- 3502
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Phaetus Dragon HF Mount for Stealthburner
Why not use the P-DRG Mount?
I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's identical to the HF variant.
Immediately during the first few prints, I clogged the nozzle. Simply because it was impossible to print PLA at under 220°C, which previously was possible (we are talking about the same filament, but a different printer/hotend). But even at 220C, it would occasionally clog the nozzle.
Is the standard P-DRG mount absolutely unusable with the HF Hotend?
If you want to print PLA - I would say, yes, it's unusable.
PETG and ABS work perfectly fine - or at least I have not encountered any problems printing these filaments.
!!! Remember to rerun your Hotend PID Tune !!!