Phaetus Dragon HF Printhead / Mount for Stealthburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Phaetus Dragon High Flow mount for Stealthburner. This design accounts for the HF's extended melting zone.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 514
- Makes
- 1
- Views
- 3,502
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
Phaetus Dragon HF Mount for Stealthburner
Why not use the P-DRG Mount?
I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's identical to the HF variant.
Immediately during the first few prints, I clogged the nozzle. Simply because it was impossible to print PLA at under 220°C, which previously was possible (we are talking about the same filament, but a different printer/hotend). But even at 220C, it would occasionally clog the nozzle.
Is the standard P-DRG mount absolutely unusable with the HF Hotend?
If you want to print PLA - I would say, yes, it's unusable.
PETG and ABS work perfectly fine - or at least I have not encountered any problems printing these filaments.
!!! Remember to rerun your Hotend PID Tune !!!