Counting matching models…
This is a BambuStudio .3mf file with 8 5x5 Gridfinity baseplates stacked for a single print. The spacers must be printed in a different material. This can be PETG or PLA support material.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Caution High Voltage Sign by RebelTaz For those of you who work with both high voltage and idiots who like to lick things that they shouldn't, here's your sign. I built an open air, AC battery rejuvenator that my dad designed that can…
Shop signage Category: Signs & Logos
Mit einem Haken aufm Dach damit man es als Christbaumschmuck aufhängen kann.
UPDATE: Updated to include a version for Juniper Model Ys and Highland Model 3s. I don't have either of those so I tested this on a rubber mat designed for those vehicles. ORIGINAL The camera bump outs on my iPhone14 were preventing the…
This is a BambuStudio .3mf file with 16 5x5 Gridfinity baseplates stacked for a single print. The spacers must be printed in a different material. This can be PETG or PLA support material.
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
Since “that one cat” removed the Dummy Thick leg set from the site, I've used the backup of the files I have to recreate them, smoother, with better finish, and fit for the new 1.0 update. Since A LOT of people asked me for the old files,…
Spojka vysokotlaké myčky HECHT 323
(Higher) Headphones holder with an adjustable screw to fit desk's thickness from 5 to 35mm.
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
A model of the hyoid bone that I sculpted in Blender over an afternoon. Due to the variability in hyoid morpholog, it is highly likely that this model is not representative of all subsets out there. I tried to be as accurate as i could to…
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
I made this set of funnels for kitchen or garage use. The funnels are threaded for optimal fluid flow and have a large body for high flow rates. The small funnel has the following dimensions: Small end: 11mm inside diameter, 14mm outside…
the original model holes for the little rodes were very tigh so remixed to make it work for me, the little rods holes
Variant of the Divider STL file to have the "click" when mags are inserted for a better lock.
Ruins with high walls for the board game “Clash for Eternia” or easily magnetized walls: I have used the slicer to cut the walls above the first row of stones and added circle shaped connectors. With adjusting the dowels it can easily be…
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
i Propose balls (42) 1color 16x 2colors 14x 3color 12x or can you try 14x from every color i thing this puzzle will be hard Ball i connect with Glue, opening 3,3/2mm is for positioning meaning probably better print ball full with support…
Arm for headlamp level sensor. fits 10mm ball. length from 60mm - 150mm, measured from senter ball to ball. STEP file included.
I added an open top vessel to a very nice and detailed human skull. I had to first unsharpen the detail of it a bit and shrink it to meet TinkerCADs size restrictions. Modifications were made mostly in TinkerCAD and later the .stl file…
this is a 4 blade toroidal fan meant for 775 d shaft motors and high rpm I printed mine using pla at 25% infil it's helpful to use the flat as the contact with the table. It may be beneficial to print a flat hub to help keep this flat…
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
This is a highly detailed fanart model of Dark Knight in a chibi style, created for private use only . It features intricate armor details, sharp facial lines, and a dynamic cape, giving the Dark Knight a unique, stylized look.…
Modified box tofix only Bang basic game + High noon and Dodge city
Introducing: The High Flow Water Fountain Straw! Built for those who don't get enough water from the normal drinking spout, the High Flow Water Fountain Straw should fill your mouth in under a second. Additional feature: If you fill up…
This extra-fluffy Highland cow sits calmly with a fringe so long it hasn’t seen a Monday since 2019. Round hooves, swoopy fur, gentle horns—perfect as a cozy desk mascot, planter companion, or gift for anyone who says “coo” instead of…
This cozy Highland cow turned holiday helper rocks a Santa hat and guards a tiny gift. Perfect as a shelf buddy, ornament, or desk mascot for instant festive vibes.
He’s traded the drizzle for dazzle. This chill Highland cow rocks teal sunnies and a straw hat like he’s late for a poolside mojito. UV index: fabulous.
A fluffy Highland cow that has discovered the true meaning of productivity: lying down and looking adorable.
The Singer 911 DLS Turbo Road is a masterpiece of automotive artistry — a modern restomod inspired by the legendary Porsche 911 , combining classic aesthetics with cutting-edge engineering . This model faithfully captures the signature…
This model recreates the iconic Mitsubishi Lancer Evolution VI as a high-detail exterior-only shell — ideal for 3D printing, display projects, or RC car body swaps. Designed with accuracy in mind, it captures all the distinctive Evo 6…
This model recreates the legendary Lancia 037 Stradale as a high-detail exterior-only shell — perfect for collectors, rally enthusiasts, and 3D printing fans. The shell has been designed as a single-piece, single-color model with no…
I had some issues with original files. The CR Touch Sensor was a couple of millimeters to low. I changed it, that the sonsor sits 3 mm higher.
Bring the charm of the Scottish Highlands to your collection with this 3D printable STL model of a Ginger Highland Cow. This adorable, shaggy cattle figure is perfect for adding a touch of rustic warmth and unique character to your…
Bring the charm of the Scottish Highlands to your collection with this 3D printable STL model of a White Highland Cow. This charming, shaggy cattle figure is perfect for adding a touch of rustic warmth and unique character to your…
Meet the fluff squad: three tiny Highland calves with swoopy bangs and serious “moo-d.” Perfect as desk mascots, planter pals, or a pocket-sized herd for your shelf. Mix the poses, scatter them around, and watch your home instantly gain…
A box for the high voltage probe. The key feature is the cutaway at the bottom. These probes have cables coming out of both ends, which makes it not a good fit for a standard box. Updated design which has holsters for probes, oscilloscope…
Good girl~ THE SAME DISCLAIMER FROM THE ORIGINAL DESIGN APPLIES TO THIS ONE This is a remix of a friend's hardware free BDSM paddle. I've added some corners at the base of the paddle to prevent it from rotating, and slightly widened the…
better to print in 0.25 noozle, PLA….MUST BE RED!
Sakura Front Shock Mount Higher plus 1mm, 2mm and 3mm.. For those who have short shocks (52mm see the picture, i use +3mm mount) and they are weak (even the spring is pre-tensioned at maximum) you can even higher the mount to help it..
These are 4040 Extrusion Mounts that are compatible with the changes I made for the Wheeled Hybrid Model below.
12/19/25 update to release V2 based on feedback from an owner of the JO/EL intake: -Changed the cutouts under the venturis from spherical to conical. -Changed engine side venturi cutout diameter from 36mm to 37mm. -Changed non-engine side…
Add a touch of absurd humor to your space with this bold circular sign: “WARNING – HIGHLY TRAINED CHICKEN – NOT RESPONSIBLE FOR INJURIES OR POSSIBLE DEATH” . Ideal for chicken lovers, pranksters, or anyone who enjoys quirky decorations.
The cute little articulated baby highland cow just went up a level in cuteness! :) 3mf file provided, simply slice and holes for eyes should appear in print preview. No supports or brim used. Printed just fine. Happy printing :) Side…
Highly customisable snug box for drill bits. A lidded box for drills, initially designed to be as small as possible and fit each drill in a separate compartment. After surprisingly little effort the design application has been broadened…
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
3D model of a stiletto heel inspired by the Louboutin style, with a 12 cm stiletto heel, elegant silhouette and slightly pointed toe.
I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
Haaaaahhhhh... Hrrrnnngh! Charon's Obol and Chronos' Gold Crown from Hades and Hades II respectively. I designed a "perfect" and "imperfect" model for each design. Both designs are 30mm (slightly over 1") in diameter and 5mm in thickness.…
Print instructions Print settings supports - no , maybe a bit with the ball brim - no layer height - any (0.2mm is tested)
Work in Progress – High-Speed Maglev Train (Concept / Morph Design) This project represents an early concept design of a high-speed maglev train inspired by various Transrapid generations, but intentionally not based on a specific…
Dakshinabhimukhi Ganesha is the rare form of Lord Ganesha whose trunk curves to the right, symbolizing discipline, focus, and powerful spiritual energy. Associated with the solar (Pingala) energy, this form is believed to remove deep…
Bring the power of the Dark Side to your collection! This is a highly detailed bust of the most iconic villain in cinematic history – Darth Vader . This model has been carefully crafted for Star Wars fans and 3D printing enthusiasts who…
This 3D printed fan has an approximate weight of around 100 g and is designed as a lightweight and practical solution for efficient airflow. Most of its structure is made using 3D printing, giving it a compact and simple design. The fan…
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
Porta lo spirito del leggendario re norreno sulla tua scrivania. Questo modello cattura i tratti iconici di Ragnar Lothbrok dalla serie Vikings , completo della sua caratteristica barba, del taglio di capelli undercut e della maglia di…
OPTION: With or without supports Self-administerable portable single eyewash station. Crossover water flow for maximum eye surface exposure and water pressure. Adapter point accommodates standard commercial water bottle openings for quick…
Please like and follow and post your makes Photo is of a real printed model. Organic tree supports Super cute little highland cow. Prints really well. 5% or more infill will work. I did organic tree supports and added a little spacing for…
The galaxy’s most courageous little droid is ready to join your collection. This Loyal Astromech Droid is a highly detailed 3D printable model that captures the iconic look of the legendary R2 unit. From the rotating-style dome head to…
I really like Extrutim 's "Grandma's Favorite" filament clips, and some 's dispenser looked like a great little organizer for them. But the clips kept getting jammed so I modified the dispenser for better fit and ease of use. Bonus…
A remake of the regular dummy 13 thigh armour piece to have a tactical pouch. Please post makes so I can see how it looks! Great for: Making soldier versions of the Dummy 13!! Print with: Any filament. Note: PRINT UPRIGHT AND USE SUPPORTS…
Convenient handle for the legs of the IKEA high chair Antilop. Can be printed upright without support. When putting the legs in the handle, the first 3 should go in without a hitch, the 4th leg will properly need a bit more force, but…
A spacer plate to feed the 5-pole high-voltage cable for the stove in the kitchen into the wall cavity. This eliminates the need to break through the wall to get the cable under the frame of the box.
I couldn't find a version with the holes positioned toward the top, so I made up this version. It has a 2mm thick wall to help keep heat and fumes inside. By moving the four holes toward the upper edge of the opening, the PTFE tubes sit…
This Valentine Highland Cow is a charming decorative figure designed to celebrate love in a cute and cozy way. Featuring a sweet bow and a rose, this little cow is perfect as a Valentine’s gift, shelf decoration, or seasonal display.
This Valentine Highland Cow – Gentleman Edition is the perfect romantic companion to the female Valentine cow. Featuring a stylish top hat and a rose held proudly in his mouth, this figure adds a playful yet elegant touch to any…
P1S Miniature – Scale Info A detailed miniature model of the Bambu Lab P1S. The model is designed as a single-piece, single-color print and requires no assembly. Ideal for display purposes. Miniatures of the other Bambu Lab printers are…
Pinecil Gridfinity stack that can store your soldering iron, 5 tips, cable, stand and other accessories.
Iron Maiden Eddie Coaster Set Aces High Tribute 100mm
For the Part#1 and Part#2, you need to have a large plate. I have printed them with my CR10 V2. I have indicated the different diameter for those parts. Assembly part: Part#1_Socle (286mm diam) Part#2_Yarn (Black color). I have used Matte…
Maximize your workspace with this high-density screwdriver holder designed specifically for the IKEA SKADIS system. This model was born out of a frustration with loose-fitting official accessories; it features a rigid mounting system that…
Just a 92mm version of Noctua's original 120mm fan grill model.
For the Part#1, you need to have a large plate. I have printed them with my CR10 V2. Assembly part: Part#1_Socle (257mm diam) Part#2_Yarn (Black color). I have used Matte PLA Part#3_Yarn (Yellow Color) Part#4_Complete Armour (Silver and…
universal thigh holder, quick release 360 rotation, knife/univerzální držák na stehno,rychloupínací 360 otáčení,nůž
Ultra-detailed print settings (Cura / Creality Slicer) Basic settings Layer Height: 0.08 mm If your printer is very stable → you can try 0.06 mm , but 0.08 is the best balance. Initial Layer Height: 0.16 mm Wall Thickness: 1.2 mm (3 lines…
This is a gridfinity bin that can hold 6 highlighters (18mm size). Created using Gridfinity add-on for Fusion and modified.
Overview / Features Because your local birds deserve a buffet that never ends! Heavy-duty, weather-resistant, and 100% bird-approved. Print Settings The 3MF file created in OrcaSlicer is included. Material: PLA Layer Height: 0.2 mm…
High-Grip Print Scraper for 3D Printers The High-Grip Print Scraper is an essential tool for any 3D printing enthusiast. Designed with a sleek and robust look, this scraper features an elevated-grip exterior that ensures a secure hold,…
High flow fan plate for the TurtleFence rear skirt, with bigger openings and an hexagonal geometry inspired by the Voron skirt fan grills. Included the ArmoredTurtle logo, that nicely fits the hex shape.
Unleash the fury of the earth! This meticulously crafted Volcanic Drake is designed for makers who appreciate intricate textures and aggressive, fantasy aesthetics. Whether you’re a hobbyist or a professional painter, this model offers…
[EN] 🚪 Shark Stop: The Aggressive Door Wedge A simple, highly effective door stopper designed with "Tire Tread" grip technology to hold heavy doors on carpet, wood, or tile. ⚡ Features: High Grip: Deep grooves on the bottom bite into…
these are a remix of the trx4m inner fenders so you can mount your esc or receive onto it
this model is made for a trx4m high trail if you want to sled pull or just need weight on the front of your truck or you think it looks cool (if you want a bronco/defender one leave a comment i'll make one)
I designed the height insert for the OpenBuggy to keep the build as affordable as possible. With the 0‑height insert, I ran into an issue where the clearance between the diff and the gear was too small, so I lowered it by 1 mm. Now…
Highland Cow / Calf Flexi – No Supports, No AMS, Kid‑Friendly Fun Bring a bit of Highland charm to your print bed with this simple, fast‑to‑print flexi cow/calf model. Designed for smooth articulation and reliable prints on any machine,…
I took the original design an made it 5cm higher. Total height now: 26cm
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
This high-detail bas-relief wall sculpture features a Super Saiyan 1–inspired warrior dramatically emerging from a cracked stone frame. The design captures intense facial expression, dynamic spiky hair, and muscular anatomy carved in deep…
