Hello Kitty Planter – High Poly Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I re-created the planter from scratch, because the low-poly-version would have shown visibly in the print. Inner…
- Rating
- 4.75 / 5
- Likes
- 268
- Downloads
- 1,947
- Makes
- 6
- Views
- 6,738
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I re-created the planter from scratch, because the low-poly-version would have shown visibly in the print.
Inner measurements are the same as in the original:
Inner diameter: 62mm
Inner height: 56mm
Wall thickness: 2mm
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
Yes
0.2mm
Infill:
15%
Filament:
Redline Filament PLA Light Pink
Notes:
I put support blockers on the eyes and the nose.
Other than that I mostly used the settings from the original file:
Support Structure: Normal
Support Overhang Angle: 60°
Support Density: 15%
Support Z Distance: 0.1mm
Support Distance Priority: Z overrides X/Y
Support Interface Thickness: 1mm
Support Interface Density: 100%
Category: Outdoor & Garden