Hello Kitty Planter – High Poly Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I re-created the planter from scratch, because the low-poly-version would have shown visibly in the print. Inner…
- Ocena
- 4,75 / 5
- Polubienia
- 268
- Pobrania
- 1947
- Wydruki
- 6
- Wyświetlenia
- 6738
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I re-created the planter from scratch, because the low-poly-version would have shown visibly in the print.
Inner measurements are the same as in the original:
Inner diameter: 62mm
Inner height: 56mm
Wall thickness: 2mm
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
Yes
0.2mm
Infill:
15%
Filament:
Redline Filament PLA Light Pink
Notes:
I put support blockers on the eyes and the nose.
Other than that I mostly used the settings from the original file:
Support Structure: Normal
Support Overhang Angle: 60°
Support Density: 15%
Support Z Distance: 0.1mm
Support Distance Priority: Z overrides X/Y
Support Interface Thickness: 1mm
Support Interface Density: 100%
Category: Outdoor & Garden