1 / 2
MK4S 10-Min Benchy — Super High-Speed PrusaSlicer Project (35 Mins to 10 Mins!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
From 35 Mins to 10 Mins! This prints project has the settings to print a SpeedBoatRace compliant Benchy 25 mins faster!
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 302
- Makes
- 4
- Views
- 838
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Shave ~25 minutes off a stock Prusa MK4S 0.25 SPEED 3DBenchy. This project file has many performance changes so you can hit ~10 minutes while staying SpeedBoatRace-compliant (standard materials, ≤0.25 mm layers, two walls, 3 top/bottom, ≤0.5 mm line width, 10% infill). Print Benchy's 4 Minutes faster than even the pre-sliced custom tuned SpeedBoatRace-compliant gcode included on the Prusa USB drive!
What’s included
- .3MF PrusaSlicer project
- Pre-sliced GCode
Requirements
- Printer: Prusa MK4S (Mine's stock, this would probably work on a Core One too)
- Nozzle: Stock Prusa MK4S 0.4 CHT or other CHT option
- Filament: PLA/PLA+ recommended
Tips
- Delete the Benchy and use this profile to print whatever you'd like, FAST!
- Enabling Retractions again adds a little time but makes the profile more useful for things other than Benchy's.
- Dry yo filament
Enjoy seeing your MK4S move in ways you never thought possible!