Counting matching models…
Das Model testet den Einsatz von Input Shaping Damit ich eine schwarze Magnet-Werkzeugleiste in der Küche verwenden kann, habe ich eine foliendünne weisse Hülle gedruckt, mit der ich die Leiste verkleidet habe. Sie dient jetzt als Messer-…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
This is a remix of a ADXL mount for the fysect input shaper for the flsunSR i printed it in PETG. This part of the mount it goes around the bed probe magnet I used 2 M3 screws and one M3 screw nut to hold it on to the bed probe magnet
Easy and convenient power input for the bambulabs P1S (or other compatible machines). This allows you to externally power devices such as a bento box without any permanent non removable modifications to the machine! You will need some…
This model is a case I recently designed to house an adapter that allows PlayStation 2 controllers to be used as standard XInput devices on any PC, without extra software! The adapter supports hot plugging and offers simple display output…
The sony amplifier I was working on was missing a button so I modeled a new one to be 3d printed. Printed on its side and in PLA. V2 has slightly larger dimension as I found my first attempt be a little small. Should be closer to the…
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
Разъем для подключения колонок или сабвуфера Данную модель вы можете приобрести тут: https://cults3d.com/ru/3d-model/gadzhet/speaker-subwoofer-input-connector-70x60 Рекомендованный размер саморезов: 20x3 - 4 шт. Рекомендованный размер…
Only hardware needed is 4 1in long #10-32 bolts. For assembly, first put the bevel gears into their slots in the case. next, slide the hex shafts into the bore in the gears, and finally bolt the top plate onto the main casing). Ill post a…
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
PTFE tube input for Ender3v2. Allows you to use a PTFE tube to feed from a filament dryer straight into the extruder. Use a short section of tube from this part into the extruder, then use a long tube to your dryer, this enables you to…
Prusa Core One / Core One+ – Internal Input Shaper Mount Adapter Tired of pulling your Prusa Core One or Prusa Core One+ away from the wall just to plug in the accelerometer? This mount relocates the Input Shaper accelerometer connection…
The sony amplifier I was working on was missing a button so I modeled a new one to be 3d printed. Printed on its side and in PLA. V2 has slightly larger dimension as I found my first attempt be a little small. Should be closer to the…
21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…
Remix of the original model with a longer input shaft, allowing it to be driven directly by a standard drill. The gear geometry is unchanged. The extended shaft makes it easier to demonstrate torque biasing and self-locking behavior at…
Makes it easier to align the chrono to front of the barrel. Can use original screws from the PCB that's screwed to aluminum housing. Made it for a friend with this chrono so I'm sharing here. Related model for 14CCW mount:…
Made this to slide over the input shaft on an ax15. 10 spline .75in pilot bearing. Used a hex size bolt sticking through end to hook my drill to. Handy to test used tranmsission before installing or when buying used.
Hola colegas , les comparto este proyecto , la idea principal fue desarrollar un transporte seguro de insumos médicos para trasladar en áreas de difícil acceso como en guerras o desastres , empacas por ejemplo a ampolleta de cristal o…
The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the…
For my ender 5 pro upgrade journey, I re-located the power switch to the front of the machine. I love this skirt upgrade and wanted to keep the aesthetic of it intact while removing the blank hole where the switch had accommodations for.…
This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host. Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure…
I recently remixed a portable input shaper mount, but after watching a Modbot video on the best location for input shaping decided to design a new one which lowered the Portable Input Shaper closer to the nozzle. Without removing the part…
Remixed the front left panel for a panel mount USB for routing to my Pi. Will be used when using input shaper via a pi pico/adxl set up. This is for the 300x300 Voron 2.4 R2 build. Just started printing parts. Will update the post with…
Mount for the PIS (Portable Input Shaper). Use heat insert, 3x40mm and 3x5mm screws Wide and narrow version available.
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
This is a compact and mobile power supply that can be operated on any Powerdelivery / QC compatible USB-C power supply or power bank. BOM: Buck Boost Converter: https://amzn.eu/d/dlvy297 PD/QC Triggermodule: https://amzn.eu/d/7sku02Q…
I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…
When I moved my AMS from the top of the unit to the table level of the printer, I kept getting feed errors going into the hub on the back of the printer from the angle of the PTFE tube. I couldnt find a simple one that I liked, so I made…
Protect the inputs shaft of a 4L80e transmission from damage during storage.
Support to attach an input module with EMI filter on my arcade terminal.
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
Using Vader 3 Pro with the analog stick unlocks great potential for fighting games, especially when assigning directional inputs to back buttons or mapping them to top buttons, and combining these with the analog stick for commands like…
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
Feature 1: Blocks Up Input This attachment prevents accidental jumps and enhances precision for command inputs. Inspired by professional players like Haitani, who have adapted their lever controllers to disable upward input, this…
Attached are two different mounts for two different accelerometers. One from Adafruit: https://www.adafruit.com/product/1231#technical-details One from HiLetGo (Amazon):…
Print as already oriented. No supports required. Print the square nut version if using hardware provided by CoPrint, otherwise print the regular nut version if needed. Follow the PDF to learn how to set up the board and to do Resonance…
X axis accelerometer board mount for TAZ moarstruder style head. Build with support for cable tie overhang.
I designed this PZB input panel to use in a railsim / driver's console environmant. Switches are based on readily available components and the appearance is pretty close to what you can find in many driver's cabs of locomotives / EMUs /…
This small platform will allow you to mount BTT USB-C input shapers to a 40mm fan while leaving enough clearance for airflow. It shouldn't have any issues printing flat-side down without supports. I printed in PETG with 20% Gyroid Infill.…
This is a quick design I came up with to mount the LIS3DH from Adafruit to an 40mm axial fan. https://www.adafruit.com/product/2809 Just print it and mount it to your hotend cooling fan using 2-4 M3 screws. You can attach the…
Adapter can be pressed into Hose inlet of Metabo ASA 30 vacuum. (Cone size: 56 mm bottom, 58 mm top, 35 mm height) It can be printed standing without support. About the OsVac System: There are plenty adapters for different hoses and…
Dust pipe for BOSCH GCM216 etc. (input d36 mm) This nozzle is designed to remove dust at a 90 degree angle.
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed. Do not remove from the build plate. Allow the bed to cool down and mount the…
Edit: this is for the silver PSU only! The Original Design's supplied STL files for the socket had a wrongly placed top socket holes, as found by me and multiple other commenters. UPDATE 12/5/2021: Original design seems to have…
I used this for my MMU3 setup with an 0.6mm nozzle. You can get the custom g-code out of the Layer-End Section. Follow the original steps, use this equation to solve for your frequency: 15 * [ (1 + (5(z) - 2) ) / 99 ]
Same configuration as the original, I just modified it so that it could be used on MK8 nozzles with a 6mm hex profile.
This model has smaller holes you you can self tap the PIS in instead of heat set inserts. This uses two M3x6 and two M3x40, there is also a M3x45 version.
This is a small carrier and mounting hardware to attach the BTT ADXL345 to the X and then Y axis of a bedslinger. I use it on my Klippered Prusa MK3S+. Then you can do the input shaping. It is easy to print. I used PLA. Other pieces…
This is so simple it's kind of dumb, but it was useful for me, so maybe it'll be useful for you. Use it to hammer in the input seal on a TKO front bearing retainer. The center hole is ½-13 thread, so you can put it on a bolt to make it…
A modified version of the input shaper mount for the Voron V0.2 to take generic 15.5mm IMU units. The one I use is here: https://www.aliexpress.us/item/3256807321107101.html The cable I use is here: https://www.amazon.com/dp/B0CCJLS4R5…
Modded input shaft to accept screws with larger heads, also separated shaft so it can print without supports
Simply print it in the center of your print-bed and screw on your MPU6050 sensor while the mount is still attached to the bed. Happy calibrating!
Hi, I decided to convert my Blackstar Core ID.3 to use a 12v barrel jack with the smaller 2.1mm inner diameter. The input provided is a 5.5mm x 2.5mm, but the smaller one seems more common and is what came with the battery pack I bought.…
I designed this around an old external HD adapter that has dual output (12V/5V) on a DIN-422 4-pin connector. I only needed 12V so only one circuit can be wired in - there isn't enough room for 4 leads in there, it's very tight. The…
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point. Just slide the Case with the sensor underneath the screw and tighten it down. i also used a long m3 screw for stabilizing the Bracket for…
Overview: Similar to my Shelly Plus 1 PoE adapter kit, this is another build that few have asked for, but I wanted and felt like sharing. I think it's a fun DIY project, and it's great for giving a demonstration of what these wonderful…
This box is designed to be the Middleman between the pedalboard and the input/outputs Easily secured with either velcro or zip ties. Included bases have either a hole on the bottom or back. The tops are available with or without screw…
Tiny funcional shell for input shaping sensor using RP2040 Zero + ADXL345. Files already in correct position to print, no need support screw holes have self-support, you only need remove this self-support with a screwdriver. Hardware: 1x…
I tried out a few of the prints but none of them seemed good, and since I only had M3 4mm screws, no nuts, some zip ties and a dream to get this done just today, i decided to design this the bed piece can be zip tied but if you want to…
When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…
Alternative Input Shafts for Owen Harrison's STACKABLE 3D-PRINTED GEARBOX
This removes the trouble of having to swap the hubs to use either the standing alone spool or the ace pro. It is oriented for kobra 3 max. In order to use it with kobra 3 or S1 Combo, you need to mirror it before printing.
This is a digital STL file for a custom-designed 3D printable case made specifically for the DSN VC288 module. The case features two openings for Jack P4 connectors and mounting holes for 4x M3 screws, ensuring a clean and secure…
English This is an junction box for surface mounting, for example next to cable ducts. The box is primarily intended to accommodate the MDT KNX Universal Interface BT (e.g. BE-06001.02) in order to integrate conventional surface-mounted…
I wanted to put MMU3 on my CORE One and I used model from dancan13f , but because of my space I needed the MMU3 to have the input PTFE tubes from top, so I have created opposite angle, than is the original. You need to print at least the…
This is a custom-designed mount for the FYSETC Portable Input Shaper (PIS) , tailored specifically for the Anycubic Kobra Neo . Inspired by this MakerWorld design , but improved for full compatibility with the Kobra Neo — no additional…
This mod adds a standard C14/IEC AC input power socket to the skirt of a Voron V0.0 printer. I designed it to fit in the back right corner of the printer, but I also included a mirror version, should you want to put it in the back left…
Fysetc portable input shaper board adapter for the E3NG V1.2 4010 and 4020 toolheads. BOM: - 2x M3x5 - 2x M3x25 Instructions: Screw down the Fysetc board to the bracket using the 2 M3x5 screws. Remove the original M3x20mm screws from the…
Разъем для подключения колонок или сабвуфера Данную модель вы можете приобрести тут: https://cults3d.com/ru/3d-model/gadzhet/speaker-subwoofer-input-connector-70x60 Рекомендованный размер саморезов: 20x3 - 4 шт. Рекомендованный размер…
Print with supports, at least for the cavity roof. Oriented in the position to be printed.
I have a bunch of 12V AC/DC adapters laying around, so I've been combining them with LM2596 buck converters. I've made the first piece in a hurry for a friend's project, so I have no clear pictures of the product yet. The space is quite…
This model is a functional dual-input adapter that acts as a central hub between your Creality Space Pi Plus filament dry box and your 3D printer. It is designed to take two separate PTFE tubes from the dry box and merge them into a…
I liked the mount, but my accelerometer did not fit. Instead of resizing, I made a simple add on to the original model so that the BIGTREETECH S2DW Accelerometer can also be used with the Y axis bed mount.
You will need a piece of standard 3M VHB tape. This tape is typically about 1mm thick. Simply stick the tape to the bottom of the finished print, and cut out the hole. Then check that your included MCX-to-BNC connector fits snugly into…
My stereo receiver/amp was dying, and I decided to replace it with a compact T-class amplifier. However, none of the ones on the market had multiple switchable inputs or a volume remote. Fortunately, looking around I found quite a few…
A DIN Rail mount for a Shelly i4 Switch input module. It also works for all Shelly modules in the same packaging. You will need to print a tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or…
Vytvořil jsem v Tincercad a v creality sliceru jsem použil šablonu na PLA..Ve skutečnosti jsem ale použil PETG kde jsem jen zvýšil teploty a snížil rychlosti v procentech na 60%… I created it in Tincercad and in creality slicer I used a…
Wanted a version with a friction-fit PTFE guide to reduce part count etc. Decided to 100% remake the mesh from scratch with significantly reduced vert counts and far cleaner geometry. The PTFE input is a tight friction fit by design.
i use pixel 1 phone for google photo backup. one of the biggest issue for using pixel is the battery swelling. So i decided to using it without battery and direct dc using battery circuit and xl4015 step down module. this case is for the…
A custom 3D-printed enclosure designed to fit the Orion Dual Input Amplifier Adapter. Provides protection, secure mounting, and a clean look for your setup. The case includes cutouts for inputs, outputs, and controls. Can be printed…
Qidi Plus4 has a single spot for the External Spool Holder. When you add the hub for the QBox, you lose the external mount. Many people have made an external double hub which lets you do both. I made a strong one, and added an arm that…
If you print this before you separate the motor and gear reduction box you can sleeve the greasy input shaft to preclude having to regrease it with moly type grease. Keeps dirt and moisture off of the shaft. Located securely on the o-ring…
Description A dual Z-axis upgrade solution specifically designed for the Prusa MINI/MINI+, which accurately addresses the core pain points of the single Z-axis structure + remote extrusion design — "Z-axis unevenness" and "XY-axis…
suite de calibracion para klipper. requisitos para el acelerometro esp32 c3 super mini adxl345 o mpu6050 cables cautin estaño tutoriales en https://www.mania3d.xyz
This mod is a modified thumbstick gate for the DualSense Edge controller, designed specifically for fighting games. It is particularly useful for players who assign up input as a move button and want to prevent accidental upward…
This is a OrcaSlicer .3mf ! Not sure if its gonna work correctly with PrusaSlicer added third cable gland hole using slicer modifiers
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Model Description This 3D model is an enclosure for the ESP32-S3 Development Board N16R8 (board size: 2.28 inch × 1.1 inch), designed for use as a WLED controller with pre-soldered pin headers. The enclosure provides space for: * ESP32-S3…
If you’ve ever tossed the Prusa Core One input shaper accelerometer back in a drawer and later found it tangled, scratched, or mysteriously “missing a cable”… this case is for you. This is an original, from-scratch design : a compact…
Description/Background: This is an insert for the Schiit Asgard 3 headphone amplifier that securely holds two panel mount RCA jacks. The Asgard 3 can be purchased with a DAC input card that connects to an internal header on the mainboard,…
