Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the repo now, I was able to find online. I also recreated the sliding extension piece so I had a 100% complete recreation of the entire paper input tray.
For the straighening/alignment flap you need a 1.5mm DIA x 10mm L metal rod and a torsion spring. The model uses McMaster-Carr Part # 9271K644 for the spring, which has a 1.7mm shaft DIA and ~9.5mm length length.
Snaps together tightly. Glue for extra strength if you want.
All parts should be printed slowly with a 0.16mm layer height for best results.
My parts are designed with this layer height in mind.
