Counting matching models…
Simple toilet paper roll holder with a phone shelf that uses a separate mounting bracket to hide the screws. Designed with optimal layer orientation for 3D printing to ensure the roll holder part is less likely to snap off (layer lines…
Simple gadget to create photobox with usual paper sheets. It's better to print with matte white plastic. After print, clear seams on paper insert gap. Stackable design! If you need bigger photobooth - print several, they can be stacked.…
Double WaveShare 7.5" e-Paper case - symmetrical borders I am using my " WaveShare 7.5" e-Paper case - symmetrical borders " for 2 years in several projects now, but some of them just would look better in my eyes if they were in 1 display…
Case for LilyGo Ts-4.7 Inch S3 E-paper board. Facilitating 18650 battery (with a separate holder) Board button access USB connector access
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
This model is a paper/photo clip to use on IKEA Skadis This model is a remix from the original model (https://www.printables.com/model/784603-skadis-photo-clip-instax-polaroid-instant-photo) by Kyne. I changed the orientation from where…
Stampato in PETG con un riempimento maggiore dell'originale
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
Wrapping Paper Cutter Makes cutting paper for the holidays super easy and painless. Requires (1) #11 Exacto Blade -PLA works great -20% infill -may need support for the one overhand depending on your printer Credit for the model goes to…
Printing Instructions Pinted on Babulab P1S 0.16mm optimal profile Printed with Filamentworld PLA+ Feedback Appreciated Please give feedback and post your makes. Any suggestions and improvements are appreciated.
125mm & 150 mm sandpaper holder with floating dividers for easier organisation in the workshop. The Cradle is not my design I have remixed it a bit for my needs. I added the dividers since the use for me depens on the type of job I do. So…
Start slow, and speed up as needed. Can use sides to cut paper.
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
A wrapping paper holder that is stackable with a wall mount
Assembly instructions. Insert the blade from the front. Then tighten with the printed screw. Easy to print, easy to use. No screws are required to secure the blade. Use a new blade to avoid tearing the paper. Be careful when handling the…
Printronix T8000 series - stop on rolls of A4 paper
To successfully craft this item, get the spring from the pen, on both sides, install the screw from the bottom, print 5 parts for the left side 2x stick 2Xroast 1xleft side/+2 cut springs, glue the springs to the underside of the roast.…
Panda toilet paper roll holder is inspired by the toilet sheep! I was asked if there was a toilet panda so I started to construct with plasticity 3d. The image of the panda's face was generated by AI. It was printed with layer height 0.2…
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
This is a small Model for different grades of Wet Grinding Paper. I needed a small storage that I could store all the different grades in an organized system. If you like to, check out my other designs too!
Have you ever experienced that annoying backward rolling of wrapping paper as you cut it, so much so that you have to use multiple weights to lay it out? And then it becomes difficult to move or replace the newly cut paper? This solves…
A tissue box with a screw-on lid. Remove cardboard core from the toilet paper roll and pull it through the opening.
Inspired by this Paper Cut https://www.thingiverse.com/thing:6897129 I made a single blade version of it. V2 update: Improved the geometry. Added the cover on the smaller part. Now the blade works much better.
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
This 3D model is a practical and space-saving screw-on support designed to hold a roll of baking paper on your kitchen door. It’s perfect for keeping your baking paper within easy reach while cooking or baking. The support is sturdy, easy…
Designed in 2021. 3D models for printing your own tool for papermaking. Ever wanted to make paper with that notorious deckled edge? Download and print your own mould and deckle. You'll just need chicken wire and screws from the hardware…
I have combined these two models into one and create hook to be able to use a toilet paper holder on a ladder radiator. In addition, I have modified the holder so that the toilet paper rod is not tubular to improve strength. I printed it…
This 3D printable paperclip is a lightweight and functional alternative to traditional metal clips. Designed for easy use, it securely holds papers together without damaging them. With a sleek and durable design, it prints quickly and can…
paper towel holder prints flat on bed. allows adjustable tension on roll by decreasing the space between the arms. build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile…
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Organizer with pull out compartment for money I have made this modern holder for books, newspapers, journals. This holder can also hold PC without any problems. Other side of the holder also has an open top where you can throw in change…
Ajustable parametric model of a two part towel holder with place for rubber feet, printable on small printers ( can be ajusted via bed length variable in project "VarSet" sheet ) ajustable wall thickness ajustable overall length Modeled…
Just a simple, easy to print toilet paper holder. Will accommodate rolls up to 10cm wide.
This is a 3D scan of the sculpture "Argonauta" created by Spanish artist and sculptor Amancio González in 2012. It depicts a contemplative figure seated in a paper boat , symbolizing vulnerability, journey, and introspection. 🛶 The design…
a more featured base for paper minis. I just added a slot to accommodate them.
The idea of launching a paper plane with a rubber band is an old one, and a slingshot even more so. For months, I've been launching various paper planes with my children using a rubber band, but I didn't have a launcher. Yesterday, I came…
Neat little rack for sandpaper storage. every shelf swings out, so you can store it all neatly packed. Models are designed to fit a 37mm bearing, and a 12mm threaded rod. Can be made as tall as you want, with how many you want. Shoot me a…
I remixed the dowel and added a half inch (12mm) to the length to accommodate a larger roll of toiler paper. Print with supports for best results!
Turn any piece of paper into a fan. This handle fits in any bag. All you need is a piece of paper, flyer, brochure, or something similar to create an efficient fan.
Putting them on requires a bit of fiddling. It's recommended to glue on the bottom part with CA glue for example. Small flanges on the top part help the removable top part grip the tube better.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A quick and easy toilet paper holder. The design is print-in-place and uses very little material. Instructions Print…
UPDATE: I would be willing to make some small modifications to this model if they would be helpful. I could easily adjust the number or position of holes or the length of the model if someone would use it. I designed this for a specific…
If you like what I do here, come visit my Facebook group. 3D printed Grow Tools & Accesories - free .stl This one is for diy prerolls, i will add another version for use with original prerolled cones soon, stay tuned ! It's important that…
There are two holes inside for possible wall mounting. The dividers should slide in with a slight resistance. This may depend on the printer calibration. If necessary, apply a drop of glue to prevent movement.
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
Doesn't require much material for printing, holds up to 8 rolls of toilet paper Consists of 2 parts, connected with a dovetail fastening Stick it on the back side with strong double-sided tape
Baking paper cutting aid for baking pan size: upper: 230 x 110mm lower: 220 x 100 mm height: 95 mm Fusion 360 modle is included, just adjust the first sketch to your baking pan sizes if it doesn't fit yours.
The tip part of the sandpaper surface.
This was a real hit at a dinner party the other night. everyone wanted to take their charm home. Printed here in PLA (though I also used PET-G). No support The plane and the clip can be assembled 2 ways
Upcycle Your Cardboard into a Paper Rack (and More) Prusament filament usually comes in large cardboard boxes. I started wondering how I could reuse these boxes to make something useful. So, I designed small angled connectors that let you…
Simple toilet paper holder that holds at least 2 rolls of toilet paper. I essentially maxed the height of this model for the Core one so keep that in mind. I've also recently learned that this model does not work with extra fat rolls.
Everyone goes there to sit with a smartphone, and after work, it needs to be put aside for a moment, and here is a place not to put it on the sink or the edge of the bathtub.
Truly extra long (~4in / 120mm) hook variation of my french cleat hooks. It is a bit wider at 24mm and can still be linked to other hooks if needed using the connector in original design. It could be used for holding other things, such as…
Bring the charm of paper dolls into the 3D world! Back Buddies are fully articulated, print-in-place figures inspired by classic paper dolls – now in a sturdy, posable 3D format. Each figure includes attachable faces and accessories that…
This organiser was designed to maximize drawer space and be as large as possible while fitting on a 256x256 print bed. All the components can be printed simultaneusly on a single bed without supports.
An A4 paper tray with stackable tabs. No Supports. It's large, so you'll need a big printer bed!
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
Important print parameters: Layer height: 0.2mm. All z-dimensions are multiples of 0.2mm. Print at this layer height for maximum precision. Wall width: ~ 2mm (equates to around 3 perimeters with a 0.6mm nozzle). The wall dimensions have…
Gridfinity rollingpapers tray Can store 1 pack or up to 3 verticaly
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
Please consider using my successor for this model: https://www.printables.com/model/1388345-bosch-pex400-sandpaper-organizer This model here isn't so stable and offers not so much space for sanding discs. This is a holder for round…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. This smooth design is also very useful for “fuzzy skin” prints, see the first image.…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. The flowers are embossed using a texture, this makes de file very heavy. I was…
My toilet roll holder broke, so I looked for a replacement and found this model from @wulfithewulf . As my existing mounting holes are different, I remixed it in FreeCAD to suit my needs. I have also attached my FreeCAD file so that…
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
A lot of paper lanterns are made by soaking a wood or fiber to make a flexible scaffold on which paper is glued. I wanted to make a paper lantern using an LED light, but couldn't find any files. It was easier to make my own scaffold than…
Uses an equivalent mini pottery wheel to the kind found on Amazon as well as the combination of 1/8" thick acrylic disks and zona papers . Design includes options for the 6 inch disks or the smaller 4 inch disks . You'll also need 6x2…
This is a sand paper radial support (150mm) for telescopic handle You'll need some velcro to attach the sand paper to the support, one 55mm screw and 2 pieces of rubber tube to secure the movement of the tool Printed with black PLA 15%…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon…
This paper clip organizer was made after I noticed my paper clip pile was getting a little too messy. I designed this to allow paper clips to be easily dropped in and filed up nicely. You're also able to align multiple of these…
Three options: 1. with a socket for a magnet (diameter 8mm, height 1.5) 2. double-sided, with numbers (initiative) 3. with a removable ring. I print front and back views on 1 side of paper (density 80-150g), cut it out, then fold and…
💻 Over the last weeks I became a huge fan of Paperless-ngx and I am currently beginning to scan all my mountains of A4 paper folders to have them in the most parts digital only. Over the years this paper archive storage has filled 2…
This model is a really cool knife that can actually cut humans and other organic tissues really well. The knife is basically an aligner for a piece of paper that does the cutting. It prints in two parts, simply slide the blade into it's…
This is a Page Stand, also known as a Document Holder, used to hold papers upright for transcribing them, or reading them as notes. This is based off a design I had when I was in High School, and while I can't include the neat…
Kitchen hanging rod & Paper towel holder using a wooden broom handle
Snap-Fit Case for CrowPanel ESP32 E-Paper (2.13") A precision-engineered, two-part protective enclosure for the CrowPanel ESP32 E-Paper HMI 2.13-inch . This design features a "sandwich" structure with a dedicated main body and a secure…
This tool can help you make fun crafts without breaking a sweat! I would recommend printing this in PETG, or any other strong material, because it will be under a lot of torque. Also for this reason, I printed the handle sideways. Let me…
It's a very practical organizer for every desk. It's very easy to print and fits on every printplate. Turn it a small angel to have movemnets from two axes and not only from one axis.
A base for cards or paper for TTRPG. THIN is good for playing cards or card stock THICK is good for cardboard cutouts 3 different Models Thin Thick Thick & Tall
I designed a magnetic clip for closing bags and holding bags, but let your imagination run wild, use it for whatever! i used a .4 noz with pla, feel free to experiment please!
Paper towel holder for IKEA Bror. I'm using it on 190cm high Bror variant. Printed from PETG, no supports. Mirror second part in slicer or use provided 3mf file. Additionally needed: 53cm (or close) long, 20mm diameter wood or metal rod…
remixed from https://www.thingiverse.com/thing:6503771 to add magnets that i had. magnets are 20x10x2mm. it uses 2 mag
Toilet paper storage bin for 2 roll. I used for the model PLA.
Toilet paper storage bin for 3 roll. I printed it with PLA.
Herramienta para lijar en diferentes ángulos y superficies, se requiere de un tornillo m5x25 y un trozo de lija de 220x15mm. Parámetros Material: PLA Relleno: 15%<
I originally printed this with a 0.8mm nozzle, but it will do with every nozzle. Just print it with 0.2mm layer height and standard settings. The original version was a bit too short in the Y direction. I corrected that and uploaded a new…
Paperclip tree. You will need six 8mm diameter magnets. Ideally at least 1 cm long.
