Laminator Paper Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.39 net (excluding VAT)
For file: 2x Laminator Paper Holder_0.2mm_PLA_MK3S_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple print that can be used as a paper holder (both input and output) for a laminator
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 43
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple print that forms an "X" when setup, and can be used as a paper holder (both input and output) for a laminator (Swingline 1701857). Other laminators will probably work, but you may want to adjust the height to match. Without this, you have to personally hold the paper on input, and sometimes output, to make sure that it doesn't warp or bend funny.
You will need to print 2 pieces for each holder, and then they'll easily slide in together to form the "X". If you want both input and output, then you'll need a total of 4 pieces.
Print Settings
Resolution: 0.2
Infill: 15
Filament: PLA
Fill pattern: Honeycomb
Solid layers: Top: 0 Bottom: 0 (remove top and bottom)
How I Designed This
A proper paper "tray" would have been much more complicated, been hard to fit on the printer bed, used a lot more filament, and taken up more storage space when put away; so I re-used the "X" idea from a previous design (https://www.printables.com/model/277409-ikea-skubb-box-small-divider).