1 / 2
Minimalist Quick Change Toilet Paper Roll Holder — image 1
1 / 2

Minimalist Quick Change Toilet Paper Roll Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€4.48 – €5.48 net (excluding VAT)

For file: Minimalist Quick Change Toilet Paper Roll Holder / tp_holder_04n_01mm_petg_mk4is_5h9m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.98 excluding VAT (range midpoint).

Weight reported by the author
63 g
Print time reported by the author
5.15 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Quick change toilet roll holder. Re-upload of a print by rAthus on Thingiverse

Rating
4.9 / 5
Likes
489
Downloads
3,370
Makes
48
Views
14,784
Reviews
40

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial

From original author description:

It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45° overhang.

It requires no additional hardware appart from the screws you'll need to attach the base to the wall, it is made to be used with any M4 or M5 screws.

Assembly and installation are very easy:

  1. Print all the parts by simply printing the all_in_one.stl file, each part is also available as an independant STL file if you need.
  2. Clean them from any defects they might have (imperfections due to stringing or over extrusion, etc).
  3. Slide the arms on the base, check that they rotate freely (see bellow what to do if they don't) and secure them by clipping the clips (see exploded view in pictures for assembly details), you might need to apply quite some pressure for that.
  4. Screw the base to the wall using whatever holes you need.
  5. Clip the cache on the base to hide the screws.

Tags