Counting matching models…
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
I printed it with the 0.2 mm nozzle, but the 0.4 mm nozzle should also work. Good luck with printing, and don't forget to like if it helped you! Fine high-quality settings recommended
A minimalistic towel rack which can be screwed with some counter sunk screws. Screws will be hidden under the cap. Easy to print without any support
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
This is a minimalistic battery holder that i made. It holds 16 AA battery.
Printed with PLA on Bambulab A1 mini with 0.4mm nozzle. Snap-fit securely holds the charger and attaches well to the Skadis board. If it doesn't fit as expected, I can provide model with a bit different/bigger tolerances.
Very small cable organizer. Full parametrized model. Can be adjusted. 3 size predefined (small, medium, large).
Looking for a stylish addition to bring a modern touch and simplicity to your space? This minimalist vase is the perfect blend of aesthetics and functionality. Its clean lines and sleek design make it a versatile piece for any room,…
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
Scalable minimalistic Owl in two versions, plain and low poly. Also, looks great when printed with the fuzzy skin option, see photo. Check out my other models here 👀 Check out my other figurines here 👀 Hope you enjoy and happy printing 😎
A fully parametric cable guide to help clean up the cable clutter on your desk. --------------------- UPDATE: V1.1 Modified design, added printable thumb screw and nut + washer on recommendation from @Ajoli_112854 , I'm not sure I'd trust…
Minimalist Card Holder – Quick to Print & Material-Efficient This sleek, minimalist card holder is perfect for neatly displaying and storing playing or trading cards. The design is optimized for fast printing and low filament consumption…
Minimalistic folding feet for laptop rear side elevation and better air flow - heavy duty version. It's easy to print and assemble. This version is focused around Cat Paw styling (PUNI) with features: let you laptop spread its paws with…
PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…
Current version is for suited for four sunglasses and can be mounted by using double-sided mounting tape. If the pins are to small, try adjusting them by a few percentagepoints to get that tight fit. Enjoy! Get creative and choose your…
The bike is easy to hang up. The hook for the pedals holds the bike securely on the wall.
stand for safety razor, scale to accommodate more/less razors
I wanted a holder that could fix the coffee filters to the side, regardless of the number of filters left. It should also require only a small amount of filament. This is achieved by clamping them to one side using the spring force of the…
Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…
The minimalist 3D‑printed house is a small decorative model with clean lines, a pitched roof, and multiple window openings. It’s designed to look charming on its own, but it becomes especially cozy when illuminated with a small LED light.…
3D‑Printed Flowerpot with Saucer – Simple, Modern, and Functional This 3D‑printed flowerpot features a clean cylindrical design that fits seamlessly into both modern and traditional interiors. Its smooth walls and balanced proportions…
Phone Stand – Simple, Stable, Easy to Print This is a minimalist phone stand designed for everyday desk use. It provides a stable viewing angle for watching videos, video calls, or following instructions while keeping the design clean and…
So I was getting fed up of my food being slightly undersalted. but since i am lazy i never got up to fetch the salt. So my answer is magnetic salt shaker. you will need 5mm cubed magnets…
This 3D model is a mount for the Backbone V2 gamepad, compatible with the IKEA Skådis pegboard. Its design combines minimalism with functionality: It securely holds the controller, allowing it to be easily removed and placed back. The…
This minimalist remote control holder is designed to keep your living room tidy while blending seamlessly into modern interiors. The angled front makes it easy to grab your remotes, while the internal dividers keep everything organized…
Stop searching and start organizing with the sleekest key storage solution on the market. Our Linear Key Rail reimagines the traditional bulky key rack into a slim, architectural accent piece. Designed with a focus on geometric…
Printed this off a while ago and love the model, so I added some cubes in OrcaSlicer to flatten out the back to work with the minimalistic enclosure kit below.…
The pattern is achieved using infill. In your slicer, set top and bottom layer counts to 0. I suggest using the honeycomb or gyroid infill. Silk PLA is suggested. Very minimal material is used - perfect for using up the remaining bit of…
This is a modern and clean-looking double wall hook that you can use to hang almost anything. Clothes, hangers, towels, bags, kitchenware etc.. It's fast and easy to print, and can be attached to the wall using double-sided tape. Let me…
This is a Minimalistic cardholder I designed for better organisation
A minimalistic stand with inspiration from modern home decor. Originally designed for my other model, the chemically accurate remix of Qwert's 'CuTe' design. This stand is perfect for phones, pictures or anything else generally flat, the…
Printed in PET-GF for durability and to visually blend with other parts of the lamp.
Design Concept This minimalistic lamp is designed with a sleek, modern aesthetic in mind, perfect for contemporary interiors. The smooth gradient surface texture adds an elegant touch to the overall design, making it not just a functional…
Dies ist ein praktischer und stabiler Phone Stand für deinen Schreibtisch oder Nachttisch 📱. Er hält dein Smartphone sicher in horizontaler und vertikaler Position, ideal zum Videos schauen, Streamen oder für Videoanrufe. Minimalistisches…
Attention! Designed for long shaft movement. Here is an example found on Amazon: click here (for this sample movement use clock movement cover1) click here (for this sample movement use clock movement cover2) The squares are 90x90mm in…
This sleek, elegant and nearly invisible wall mount can easily support the full weight of the Echo Studio, even when printed in PLA. Although i suggest printing this model in ASA, ABS or PETG. PLA might bend over some time, but can still…
This sculpture feels like a quiet breath held in solid form. Rising from a gently tapered base, the piece narrows at the waist before opening into broad, symmetrical flukes that sweep outward with calm confidence. The central ridge runs…
A minimalistic, yet surprisingly good tampering holder for the De'Longhi Stilosa portafilter
Simple two part photo frame for 5x7 photos. Just print the two pieces flat and join them together. No supports needed. You can insert or remove photos without needing to open the faces.
It is a really simple stand for tablets. It offers four different angles (10°, 20°, 30°, 40°) and takes tablets or phones up to 7.5 mm thickness. I tested it with iPhone X, iPhone 14 Pro Max, iPad Gen 6, iPad A15 and iPad Air M1. There is…
A sleek black flower pot with a matching saucer , featuring a gently tapered shape and a modern matte finish. Its minimalist design makes it a stylish choice for indoor or outdoor plants, from small decorative flowers to herbs. SETINGS:…
This minimalistic filament spool stand serves two purposes - the obvious one, to secure the filament spool on the shelf or inside a drawer, preventing movement when opening and closing the drawer. And also it acts as a sample print for…
The object is printed in two separate parts, which can be screwed together with a firm grip. Printed on .2 Layer height with no supports.
A practical holder for the Philips OneBlade with space for all attachments. Its compact design and support‑free printing make it an ideal addition to any bathroom. SETINGS: material: PLA Nozzle: 0,4 infill: 15% SUPORT:NO SUPORT
A simple remix for @tig33rs original bracket that removes the paddle shifter mounts.
Put this together in TinkerCAD after not being totally happy with most models I'd seen. I use the 76 and 50 mm square Post-It notes on a daily basis for work- as well as a few select pens. Fits 7 Post-It pads and a stack of the smaller…
Enjoy my minimalistic easter bunny design :) Sizes: Four size suggestions shared (see files), but I esp. love the small ones. Please size as you like. XS prints in <30 min with 3g of filament. Print instructions: Supports: No Brim:…
Remix with added base chamfers, base corners and fillets for printability and looks.
This is a holder for LM8UU linear bearings. It should fit well on classical Prusa i3 printers. Category: 3D Printer Parts
Check out the full YouTube video here: THE INTRO: Step up your (visual) game with this (somewhat) compact, but definitely unique and one-of-a-kind vertical ITX case designed specifically to not only look good, but also have a small…
Hello, Sharing my project of minimalistic phone stand. Very quick and easy print, below 10 gram of filament :) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs…
a small minimalistic shelf to put on a wooden surface using screws, it won't really handle heavy things, but its a pretty good way to store small things Post a make pls 🙏
10cm in height. 15.5g 1h 10min on A1 mini I printed it with: 0.2mm layer 2 walls 50% lightning infill (probably not mandatory) no supports fuzzy skin 0.1 0.1
This is a remix of the minimalistic stand for Apple Watch that will print as one piece. It is compatible with Opengrid / Multiconnect to add your watches to the wall grid. Mirror is slicer to align the watch face from left to right side.…
Description These Corner Alignment Guides are designed to keep a Sterilite 58‑Qt bin lid more secure when used on the Snapmaker U1. This setup is meant to reduce overall noise while still allowing airflow around the machine. This design…
Adjusted original model to use Adafruit's HUSB238 USB-PD and a different filter type. Removed switch...makes in more minimalist 🙂 The fan guard is a PrusaSlicer merging of the original model's fan plate and Noctua's fan grill. Printed in…
Minimalist Funnel A compact universal funnel designed for clean and precise pouring of liquids or small granular materials into narrow‑neck containers. The model prints without supports and features a smooth inner surface for optimal…
A compact universal box designed for simple and organized storage of small items or materials. The model prints without supports and features smooth inner walls for easy handling and cleaning. Suitable for PLA or PETG. Ideal for home,…
I designed these trying to turn a very cheap keyboard into something special. I wanted it to be low profile even having full-height cherry switches and be FLAT. In this image you can see them slowly replacing a pudding keycaps I had in my…
Two variants of minimalistic laptop stand, one with 35 degrees and one 45 degrees angle helpful when connected to the docking station but you still want to use the display next to other screens a bit higher above the table. You can add a…
A compact STL model featuring a triangular base with a smoothly curved top edge. Its clean, minimalist geometry and smooth surfaces make it suitable as a design element or structural component. SETTING: Material: PLA / PETG Infill: 15–20%…
Are you a Lego Lover? If yes, this roll paper holder will fit nicely on your kitchen walls. This idea came from watching my Lego MiniFigure Chef. Roller Pin Sizes : Version A - Outside diameter 47.1 mm Version B - Outside diameter 37 mm…
Heyho I was looking for a stable and very inconspicuous holder for the cable to my ceiling light. I didn't want the cable to sag and I wanted it to be easy to guide. Of course, this bracket can only be used for power cables without…
Stojan na obal gramodesky, když deska hraje. Tištěno z PLA Prusament galaxy black, Original Prusa MK4, tryska 0,4 mm, 0,2 mm quality, bez podpor
Display your benchies with style! With this hook, you can hang your benchies easily to your Honeycomb Storage Wall. The grid of the Honeycomb Storage Wall has the perfect distances to safely add and remove benchies. For each hook, print a…
Holder has to be screwed or glued to a surface as it is very light and will move, when you try to pick a sheet up.
I wanted to design a Polaroid stand that would be as easy to print as possible and using little filament. It works surprisingly well and is also rather understated visually, which I really appreciate in this case. // Ich wollte einen…
I made the original holder to be wallmounted, but i didnt make any screw holes. I added som models with screw holes to. I used dobble sided tape to mount my holders. Enjoy :)
I created the model to be wall mounted, but it is without screw holes. I mounted my holder with dobbel sided tape. I made som models with screwholes to. Enjoy :)
I printed it in PETG. layer height @ 0.2mm , infill 0%, no brim.
Tree supports are recommended. Adjust Z-position to align the first layer of the part with the surface.
This wall mount is for Dewalt drill style form factors. I've tested it with the Impact, Drill, and Heat gun. In theory it should also work for the wire stripper, larger impact, caulking gun and spotting light. However I don't have those…
Deutsch: Diese moderne Vase besticht durch ihr offenes Design mit einer Voronoi-Struktur. Die einzigartige Musterung verleiht der Vase eine luftige Leichtigkeit und macht sie zu einem besonderen Hingucker in jedem Raum. Ideal als…
Deutsch: Diese tropfenförmige Vase zeichnet sich durch ihre elegante spiralförmige Textur aus. Das geschwungene Design und die feine Struktur verleihen der Vase eine dynamische und dennoch harmonische Optik, die perfekt in jedes moderne…
Because I couldn't find a suitable one, here is my own stand for the RedMi Pad SE 10 inch printed : https://www.cr3d.de/produkt/abs-neongruen/ best Material u can get
A minimalistic wrench to loosen and tighten GoPro screws Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you fulfil using these links (at no…
Fast and easy to print spiral mode layer height - 0.2 lid and body - 3 bottom layers midpart - 2 bottom layers This is solid model meant to print in vase mode.
A nice looking container with a lid. The lid is not waterproof if the o ring isn't added. Used for a home decor. Print in any material you like, but I find this kind of containers best looking in SILK Pla.
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
A basic model of 10x35x4mm. I scaled mine twice the size on X and Y, inserted text with depth of 1mm and paused at the beginning of the layer the text printing starts to swap out material.
Minimalistic easy to print and assemble folding feet for laptop rear side elevation and better air flow - heavy duty version with many new features. It's an evolved V2 version of initial model of Minimalistic Laptop folding feet . New…
Slide-In picture frame designed for easy and fast picture replacement. Just print two parts and connect them together. Easy print, no supports needed. No special print specifications; any layer height and infill percentage will be alright.
Minimalist stand simply to get the base of the Macbook elevated and provide some ventilation. This resolved the overheating problem I was having and which caused the CPU to throttle down. I designed this for a 16" Macbook Pro with…
Works for all types of Bottles. Crystal, Plastic and Duo
Printed with PLA and a 0.16mm Layer Height. Infill of 50%, less would probably work too. No supports needed.
Deutsch: Dieses elegante, minimalistische schwarze Stativ dient als praktischer Halter für Smartphones oder Tablets. Es ist aus robustem PLA/PETG gefertigt und bietet durch seine stabile Dreiecksform eine sichere Ablage für verschiedene…
Simple holder for drumsticks fitting the Roland V-Drums series
