Minimalistic Analog Clock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: Clock_Hands_0.05mm_PLA_MINI_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 21 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A minimalistic design, analog desk clock with a wavy second hand. Fits on a Prusa Mini bed, no support needed
- Rating
- 4.8 / 5
- Likes
- 271
- Downloads
- 481
- Makes
- 5
- Views
- 3,723
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Do you want a small clock that is not boring and ugly but shines in your interior with a minimalistic touch? Well, here is the Minimalistic Analog Clock for you to print.
This clock was designed to fit a Quartz clock mechanism (I took one from an old clock laying around). Here you can order one: Aliexpress, Amazon. Note: this clock mechanism does not have a thread shaft, see image below.
Assembly
- Print the parts: the clock plate, holder and hands. No support is required.
- Place the clock mechanism with the battery holder faced up through the hole of the clock plate.
- Slide the clock plate into the holder.
- Push the custom clock hands in place.
- Hour hand
- Minute hand
- Second hand
- Add the pin that came with the clock mechanism (or print one your own)
- Add an AA battery to the clock mechanism
- Place the clock at a nice place in your interior and enjoy!
Ps: this was my first print for the Prusa Community. I hope you enjoy! :)
Feel free to make a remix of this. Would love to see your creations!