Counting matching models…
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
I printed it with the 0.2 mm nozzle, but the 0.4 mm nozzle should also work. Good luck with printing, and don't forget to like if it helped you! Fine high-quality settings recommended
A minimalistic towel rack which can be screwed with some counter sunk screws. Screws will be hidden under the cap. Easy to print without any support
3D Printed minimalist bedside lamp with Ikea with smart bulb
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
Simple remote caddy, but can be used for anything I opted for fuzzy skin mode for a textured surface
This is a minimalistic battery holder that i made. It holds 16 AA battery.
This 3D-printed speaker stand is designed to fit 14x14 cm speakers and features a 1 cm stopper to keep them from sliding around. It’s compact, looks great on any desk, and gets the job done. The design is 14x15 cm but can be easily scaled…
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo. Settings: Layer height: 0.2mm (STRUCTURAL) Perimeters: 8 Top Solid layers: 0 Bottom Solid layers: 0 Infill: 15% Fill…
Printed with PLA on Bambulab A1 mini with 0.4mm nozzle. Snap-fit securely holds the charger and attaches well to the Skadis board. If it doesn't fit as expected, I can provide model with a bit different/bigger tolerances.
Very small cable organizer. Full parametrized model. Can be adjusted. 3 size predefined (small, medium, large).
Looking for a stylish addition to bring a modern touch and simplicity to your space? This minimalist vase is the perfect blend of aesthetics and functionality. Its clean lines and sleek design make it a versatile piece for any room,…
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
Design inspired by pieces assembled to create minimalist paintings and ornaments. Print them in different colors or materials and personalize every detail. The only limit is your imagination! Share your designs and creations in the…
This elegant and simple cone-shaped incense holder is the perfect complement to any space. Its basic and minimalist design allows it to be easily combined with other decorative elements in the home, such as trays, candle holders or even…
Este tipo de maceta la he visto en Pinterest varias veces, y me gustó mucho el diseño, por lo que la modelé en 3d, y obviamente la optimizada para que se pueda imprimir sin problemas. No necesita soporte ni ningún parámetro especial para…
This is best printed in PETG or stronger materials for any load over a few kilos. Excellent for hanging towels, coats, or bags over a slim door. This hook is designed to be hung on mirrors/doors/objects 25mm (~1 inch) or less in…
Optimize your workspace with this sleek and modern vertical MacBook stand! Designed for stability, space-saving, and style, this stand keeps your MacBook upright and secure while enhancing your desk’s aesthetics. 🔹 Modular Design:…
Scalable minimalistic Owl in two versions, plain and low poly. Also, looks great when printed with the fuzzy skin option, see photo. Check out my other models here 👀 Check out my other figurines here 👀 Hope you enjoy and happy printing 😎
Thank you @FritzPeppone for the detailed guide of creating city map lamps. https://www.printables.com/model/1213781-minimalist-city-map-lithophane-lamps-tutorial On this very helpful base I startet with the City of Leipzig (Germany) and…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
Designed to hold your book open at the right page while also featuring a notch for your favorite drink, this minimalist stand brings comfort and practicality together. With its sleek, simple design and the engraved phrase "Stay Cozy" ,…
Still relatively new to the CAD side of things. Made this simple toothbrush holder in Tinkercad. I recommend printing this on its side (a brim may be helpful if you don't have great bed adhesion). It should work without supports, but you…
A modern, minimalist catchall tray, ideal for anything that would otherwise be lying around. It's easy to print and fits seamlessly into your home decor. The standard dimensions are 200 mm x 130 mm x 30 mm (scalable). Printed with the…
A fully parametric cable guide to help clean up the cable clutter on your desk. --------------------- UPDATE: V1.1 Modified design, added printable thumb screw and nut + washer on recommendation from @Ajoli_112854 , I'm not sure I'd trust…
Minimalist Card Holder – Quick to Print & Material-Efficient This sleek, minimalist card holder is perfect for neatly displaying and storing playing or trading cards. The design is optimized for fast printing and low filament consumption…
A remix of another spool holder that I found on Thingiverse, just with some modifications I needed, like the two holders not sliding away from each other. Is expandable. https://www.thingiverse.com/thing:3080612 Newly added left and right…
This sleek and minimalist plant stand is perfect for use in your garden, balcony, or raised bed. The pointed legs can be easily inserted into soil or substrate and provide stable support for pots or decorative items. 🔧 Special Feature: An…
My wife loves buying the foaming Bath and Body Works foaming soap dispensers. I always thought the bottles didn't match the theme of our house. I went ahead and made a holder for the dispensers. I have two different versions depending on…
A simple, fast and easy to print holder for your Philips One Blade. The less material you use the more sustainable it will be. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid…
Minimalistic folding feet for laptop rear side elevation and better air flow - heavy duty version. It's easy to print and assemble. This version is focused around Cat Paw styling (PUNI) with features: let you laptop spread its paws with…
A simple, fast and easy to print holder for your Megasonex toothbrush. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid mold and stains. Two versions available: Glue on with a…
Step into summer with these clean, minimalist flip-flops – designed for comfort, style, and simplicity. The design features smooth curves, a laid-back look, and a subtle sole contour. Perfect as a fashion concept, decor piece, or for…
2 gram print. 1.2 layers, 0.4 tip, 3 line wall, 20% infill. 2mm heat sets. Flip the stock duct around so the fan sucks from above and install with 2mm screws and nuts.
I made little change with this model
Description Keep your desk organized in style with this minimalist hexagonal pen holder , designed specifically for Leuchtturm1917 pens – or any pen with a hexagonal body smaller than 8.90 mm in width. The holder fits up to 4 pens , each…
A great low-poly sculpture of a rabbit. Modern yet timeless. Can be printed without supports. The model's default dimensions are 197 mm x 148 mm x 105 mm (freely scalable). Printed with the following settings: Scale - 75% (148 mm x 111 mm…
PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…
Unique Shelf that can hold a small thing on the bottom and a small thing on the top. I have not tested it, but it should print fine with supports.
This minimalist tray brings a quiet kind of beauty to your space. At the center is a peaceful, sleeping face — softly resting inside an oval shape, like it's dozing off in a daydream. The design is simple but full of emotion, with gentle…
🇹🇷 Kişisel kullanım içindir ✔ | Satış için Patreon'dan lisans alınmalıdır 🔑 🇬🇧 For personal use only ✔ | Commercial use requires a Patreon license 🔑 🌿 Modern and Stylish 3D Printable Vase Collection 🌿 This elegant collection of 3D…
This is a minimalist desktop phone holder that is compatible with most smart phones and also allows them to be charged when in use. There is also a separate TPU feet that help with gripping the ground if it is too slippery. The TPU feet…
Jan_P's creation, but with hotend hoders. You can select the number of hotends. This sits on the right side of the printer.
Current version is for suited for four sunglasses and can be mounted by using double-sided mounting tape. If the pins are to small, try adjusting them by a few percentagepoints to get that tight fit. Enjoy! Get creative and choose your…
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540665699883109654 ℹ Description: This low-poly meerkat figure was custom-designed to combine the charm of this curious…
The bike is easy to hang up. The hook for the pedals holds the bike securely on the wall.
stand for safety razor, scale to accommodate more/less razors
JUMP is a minimalist optic riser designed for use with toy dart blasters. Available in 30, 35, or 40mm riser heights with either 0 or 3 degree forward cants. Mix and match as needed to suit your preference and blaster performance. The…
Design Concept The minimalist tray embodies simplicity and functionality, inspired by clean lines and an uncluttered aesthetic. It is designed to hold small items like jewelry, keys, or stationery. Uses Ideal for organizing small items…
I wanted a holder that could fix the coffee filters to the side, regardless of the number of filters left. It should also require only a small amount of filament. This is achieved by clamping them to one side using the spring force of the…
Hello! This is M-technologies! This is my first project in this category. In my opinion, the model is incredibly beautiful and functional, although it doesn't contain any outstanding ideas.😊 cup holder.
A clean, modern take on cycling art. This minimalist bicycle sculpture captures motion through simplicity — sleek lines, soft matte finish, and balanced geometry. Perfect for design enthusiasts, cyclists, or anyone who loves modern…
Keep your glasses safe! Use 3M double-sided tape to stick this wall mount / holder to the wall. Slide one arm of the glasses down into the holder. I print this with these settings: 1.5mm Structural 100% infill, rectilinear PLA 13/12/2025…
Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…
A sleek, minimalist Christmas tree ornament designed for quick and easy 3D printing. One‑piece print – minimal supports needed Modern look – smooth surfaces, clean lines, star on top Compact size – ideal for desks, shelves, or festive…
Bring a delightful touch of holiday charm into your home with this minimalist Rudolph ornament—simple, sweet, and absolutely perfect for Christmas. Its clean shapes and bright red details make it a natural fit for your tree, mantel, or…
This 3D-printable pencil holder is a simple and modern desk organizer designed to keep your workspace neat and efficient. With its clean, rounded shape and stable base, it’s perfect for storing pencils, pens, markers, brushes, or small…
This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
This minimalist sitting reindeer is designed to be an easy and reliable 3D print, perfect for Christmas and winter holiday decorations. Its smooth lines, rounded shapes and solid proportions make it highly durable and ideal for display on…
The minimalist 3D‑printed house is a small decorative model with clean lines, a pitched roof, and multiple window openings. It’s designed to look charming on its own, but it becomes especially cozy when illuminated with a small LED light.…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 25+ Supports: No Print Orientation: Default as modeled Brim: No Use the 3MF file to add custom text in the Slicer. Recommended text settings: Font:…
3D‑Printed Flowerpot with Saucer – Simple, Modern, and Functional This 3D‑printed flowerpot features a clean cylindrical design that fits seamlessly into both modern and traditional interiors. Its smooth walls and balanced proportions…
Phone Stand – Simple, Stable, Easy to Print This is a minimalist phone stand designed for everyday desk use. It provides a stable viewing angle for watching videos, video calls, or following instructions while keeping the design clean and…
Compatible with Google Nest Hub (2nd Gen).
Dieses Modell konzentriert sich auf das Wesentliche: Form und Schatten. Die versetzte Anordnung der "Pillen" oder Kapseln erzeugt ein ruhiges, aber dennoch interessantes Muster, das an moderne Fassadengestaltungen oder hochwertiges…
So I was getting fed up of my food being slightly undersalted. but since i am lazy i never got up to fetch the salt. So my answer is magnetic salt shaker. you will need 5mm cubed magnets…
This is the lite version of my minimalist filament holder. It removes the integrated storage and focuses purely on stability, clean geometry, and reduced print time. The goal was to create a filament holder that feals intentional and…
This 3D model is a mount for the Backbone V2 gamepad, compatible with the IKEA Skådis pegboard. Its design combines minimalism with functionality: It securely holds the controller, allowing it to be easily removed and placed back. The…
This minimalist remote control holder is designed to keep your living room tidy while blending seamlessly into modern interiors. The angled front makes it easy to grab your remotes, while the internal dividers keep everything organized…
Printed with standard settings, 0.2 mm layer height and a few supports just to keep the wings steady. Added a .3mf project file with fuzzy skin applied to the wings. Looks even better that way.
A clean, modern piggy bank with smooth curves and a simple, timeless form. This model is designed to look good from every angle, which means supports are required during printing to preserve the shape and underside geometry. The result is…
Stop searching and start organizing with the sleekest key storage solution on the market. Our Linear Key Rail reimagines the traditional bulky key rack into a slim, architectural accent piece. Designed with a focus on geometric…
OrbitTag is a minimalist AirTag holder designed with a focus on clean geometry, everyday usability, and reliable support-free printing. ORBITTAG is a minimalist AirTag holder inspired by seed structures and natural orbital geometry. Its…
Printed this off a while ago and love the model, so I added some cubes in OrcaSlicer to flatten out the back to work with the minimalistic enclosure kit below.…
The pattern is achieved using infill. In your slicer, set top and bottom layer counts to 0. I suggest using the honeycomb or gyroid infill. Silk PLA is suggested. Very minimal material is used - perfect for using up the remaining bit of…
This Japanese sports car front silhouette is a clean and minimalist 3D model inspired by iconic 90s performance cars. Perfect as wall art, garage decor, office decoration, or a gift for car enthusiasts . The model features a flat, layered…
These table numbers bring a unique and modern look to any event: weddings, banquets, or dinners! Files included are tested .stl files for table numbers 1-22 as well as a detachable base. The base works for all table numbers and is a snap…
This minimalist mini basket with a smooth handle is a clean and elegant 3D model designed for both decoration and light storage. Its soft curves and simple shape give it a modern, calming look that fits perfectly into any space. The…
I have been using it for over a month now and am very satisfied. Features No original part replacement, easy installation Metal-free, fully 3D-printed PETG printable Only 2g, easy to print, no supports required Significant optimization:…
I was annoyed with the basic case my extra fine sharpening stones came with. I wanted something that would lie flat, keep the stones together, did not rattle, and blend in with my other knife accessories. The tolerances on the model are…
Chromecast Remote Wall Mount / Holder – Minimalist & Secure Keep your entertainment setup organized with this clean, minimalist Chromecast Remote Holder . This wall-mountable sleeve is designed specifically for the modern Chromecast…
Minimalist Tray with Planter & Tealight Holder This modern decorative set consists of three parts: a sleek oval tray, a small rounded planter, and a ribbed tealight candle holder. The design is inspired by clean, minimalist interiors and…
This is a modern and clean-looking double wall hook that you can use to hang almost anything. Clothes, hangers, towels, bags, kitchenware etc.. It's fast and easy to print, and can be attached to the wall using double-sided tape. Let me…
Slim, minimalist wallet which solves the two main issues I found with several of the minimalist wallets I tried before: They were either designed with a specific number of cards in mind (or one had to print variations every time one…
This is something I whipped together with Fusion. I am just beginning, and I feel like this is a good imitation of IKEA. You should be there when in makes the first layer, because if the holes fail, it will give you a very bad day...
A sleek, space-saving organizer for markers and pens. The angled shelves provide perfect visibility and easy access, while the rear compartment handles taller items. Print Settings Orientation: Print upright (as shown in the 3rd image).…
🌹 The Honest Shelf Vol. 037 // Minimalist Roses 🌹 ⚠ Pro-Tip for the Perfect Fit: The default file size is 180mm —ideal for small vases or gift boxes. If you have a larger vase, simply scale the model up in your slicer! To get the maximum…
Bring a touch of nature-inspired engineering to your desk with this Bionic Tablet and Book Stand . Featuring an intricate bionic pattern. The lightweight, organic structure is optimized for strength and stability, providing a perfect…
Stylized minimalist figure in a balanced yoga pose with smooth, layered texture.
Recommended material: PLA or PETG Layer height: 0.2 mm (0.16 mm for smoother finish) Infill: 10–15% Print orientation: flat on the back Supports: not required Suggested colors: black frame and lines, white or light background Optional:…
My daughter uses a lot of decorative tape in all kinds of colors and patterns, so I wanted to print her some extra tape rollers. It does NOT work with regular clear TESA tape (their red and blue tape roller in the picture has a steel…
Elevate your IKEA Skadis setup with these sleek, minimalist planters. Designed specifically for small succulents, cacti, or propagation cuttings, these planters feature a clean ribbed texture that blends perfectly with modern office or…
This is a collection of mechanical keyboard switch fidget toys designed to reuse spare switches and give you something satisfyingly clicky on the go. Variants Included Each variant comes in Normal and Minimalist versions: Single switch…
Learnt from my previous builds. No more gimmicks this time, just a simple desk lamp. Feel free to remix on my Tinkercad . PARTS LIST These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That…
