Minimalist Sticky Notes Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.87 – €1.07 net (excluding VAT)
For file: minimalist_sticky_notes_holder_R1_0.3mm_PLA_MK3S_50m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 49.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A minimalist holder for 3"x3" pop-up Post-it® sticky notes.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 1
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Intro
A minimalist holder for 3"x3" pop-up Post-it® notes on any surface, always visible, always within reach. Mount it with a double-sided tape on a fridge, whiteboard, or wherever you need it.
Details
I use sticky notes and a marker on my kitchen fridge to jot down quick reminders, grocery lists, and notes. But I kept the notes on the counter, and they'd get ruined with coffee spills, cooking grease, sauce splatters, wet hands, etc. Sometimes they'd get knocked behind the counter and lost completely.
So, I designed this holder to move my sticky notes off the counter and onto the side of my fridge. It mounts to any surface with a double-sided tape: fridge doors, cabinet sides, walls, desks, whiteboards, or anywhere you need quick access. The holder also lets you pull a single note with one hand, no need to hold the stack down while peeling one off.
No more ruined notes or fishing them from behind the counter. Just pull, write, and stick it up. A small fix for an everyday annoyance.
Materials and Print Settings
I used Prusament Galaxy Black PLA for this print, even after almost 2 years of continuous use, the original PLA print is still holding up well. However, I acknowledge that printing it in PETG or another stronger material would be an even better choice to ensure long-term durability.
All recommended parameters and settings are saved in the provided .3mf file, but adjust as needed for your setup.
Other Models
Check out this minimalist magnetic marker clip that pairs nicely with the sticky notes on the fridge.
Updates
01/06/2024 - Published.
12/16/2024 - Text description updated.
01/09/2026 - Model updated. Text description updated. Photos updated. 3MF files added. License changed.
All model sketches, wireframes, visuals, animations, videos, user experience design, industrial design, 3D models, 3D model renders, STL files are created by Not Really Lex (NotReallyLex) and copyright protected.
This model is provided as-is. All rights reserved. Copyright © 2024 Not Really Lex (NotReallyLex).
Post-it brand name is the worldwide trademark or registered trademark of 3M. Sharpie is a trademark of Sanford, LP and is registered in the United States and other countries.