P
Printables
Pokemon Electrode - fridge magnet
Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm
Search results: fridge
Counting matching models…
P
Printables
Voltorb - Pokemon fridge magnet
Easy to print magnet for fridge - pokemon voltorb. You need one magnet 4x2mm
P
Printables
Magnetic storage box for fridge
We do have a lot of magnets from WolffKids to plan the week together with my kids. To organise the magnets itself I was looking for a solution. The vendor does have a similar one but I wanted to design it myself. The box can be printed…
P
Printables
ONE PIECE - "To Be Continued" Fridge Magnet
“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…
P
Printables
Dometic 12V fridge Door lock pin
V1 is with a printed push pin, printed with small pin up V2 use a back end of 4,5mm drillbit, cut/saw the drillbit to 30mm length glue it in, printed with the hole down printed in abs, do not use pla because its in a vehicle(gets too hot)…
P
Printables
Norcold RV Fridge Storage Door Prop
I couldn't find a door prop I liked for the fridge in my camper, so I made one. This latches into the catches on the fridge and the door pins, creating a pretty sturdy arrangement that will allow the fridge and freeze to breathe to…
P
Printables
HDMI5 Skirt for Voron with Clicky-Clack Fridge Door
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
P
Printables
Frigidaire Mini Fridge Freezer Handle & Latch Replacement (FFPE4533UM)
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
P
Printables
Haier Fridge replacement ice / water paddle
This is a replacement paddle for Haier fridges. In order to install, you need to first remove two screws at the front just behind the display Remove the display by folding it forward and lifting up Remove 4 screws which allows you to take…
P
Printables
1/10 Scale Fridge myCOOLMAN
Necessary equipment for longer RC expeditions. Not cooling. Maybe next time. You will need (8) M2*5 (2) Hinges 8x10mm ( https://www.aliexpress.com/item/1005005574915000.html ) UPDATES 2025-03-09 - FridgeS_bottom_v2 - Added holes for…
P
Printables
Water Dispenser lever for KitchenAid and other fridges
Water Dispenser lever for KitchenAid and other fridges This lever allows for dispensing of crisp cold water using one hand. Tested on KitchenAid model KBFS22EWMS but the same model is branded under Whirlpool and Frigidaire. Bracket part…
P
Printables
Arctic P9 Fan mount for Thetford fridge vent
Fan mount fits 483mm x 186mm Thehtford caravan/rv fridge vent. To connect several fans I used my fan joiner (https://www.printables.com/model/1217820-fan-joiner-arctic-for-arctic-p9-pwm-pst). I used M4 heat set inserts and M4x12mm bolts.…
P
Printables
Fortnite Creative Fridge Magnet Icons
The devices icons for your fridge, just print in separate colors and slide them on! :) You will need circular 5x2mm magnets. Category: Decor
P
Printables
Fridge Handle Repair beko
Fridge Handle Repair beko Uchwyt mojej lodówki Beko się zepsuł, który jest dostępny w urządzeniu. Wydrukowałem modele grafiki @z SUNLU PLA+ 2.0 w kolorze białym. Uchwyt solidny i bardzo zbliżony do oryginału. @Rozstaw kanałów wynosi 192,6…
P
Printables
Mini Fridge Stealth Skirts for Mellow Fly 3.5 TFT V2
Voron V0.2r1 Stealth Skirts for Mini Fridge / Colony Clacker door and Mellow Fly TFT V2 touch screen…. wow that was a mouthful.!!! so this one was born when a good friend reached out to me and asked if it were possible to somehow fashion…
P
Printables
Kühlschrank Magnet / Fridge Magnet
Hey, ich wollte endlich Ordnung am Kühlschrank haben und hatte noch Magnete übrig 5x15mm also einfaches griffiges Model wo jeder von klein bis gross damit zurecht kommt und aber auch nicht zu verspielt aussehen, gedruckt habe ich mit…
P
Printables
handle for internal fridge freezer
Prints standing with a brim and a bunch of support. The triangle for support snaps off after printing.
P
Printables
Kühlschrankablage für Flaschen u Dosen/ Fridge rack
Hier ein paar Modelle für den Kühlschrank um Flaschen und Dosen zu verwahren, ohne dass sie hin und her rollen. Ich hatte schon ein paar dazu gesehen, aber da war mir teilweise der Aufbau zu kompliziert oder das Design war nicht ganz…
P
Printables
Caravan fridge fan mount for 2x 120mm fans in Dometic LS100 cutout
I wanted something which fits exactly in the cutout of the Dometic LS100 ventillation grille. As there is only little space between the cooling fins and the Ventilation grille at my caravan, I needed a solution for 15mm fans. While…
P
Printables
fan holder universal absorption fridge
update 19-2-2026 Small update on the knobs and the hooks: the fan holder has extra support in the tracks for the hooks. Upadate 24-8-2025 Hi all, Here is an update: I made changes to the fan holders so they are a bit fatter. This way,…
P
Printables
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
P
Printables
Amana Fridge Door Handle
Top door handle for older Amana fridge. Approximately a 1990-2000 model
P
Printables
Magnetic Perpetual Calendar for Fridge
Practical perpetual calendar with magnets that easily adheres to the refrigerator or any metal surface. It has a functional design that allows you to insert a piece of paper standard letter-size 8.5"x11", A4, or any custom size you…
P
Printables
Fridge shelf riser
Shelf riser for DEXP RF-SD090RMA/R refdigerator. May also fit some other fridges with same shelf mounts. Allows fitting more 1L and 1.5L bottles without removing top shelf. Print each part normal + mirrored (4 parts total).
P
Printables
Hokey Mokey CJP Fridge Magnet Keychain Fob
Hokey Mokey CJP Fridge Magnet Keychain Fob uses two 10mm x 300 magnets.
P
Printables
Dometic Fridge RC 10 grid to prevent freezing food at back wall
The camper van fridge Dometic RC10 has nothing to prevent the food from touching the interior back wall. If the food comes into contact, it starts to freeze. This grid is clamped into the shelf of the fridge and has spacers on its back to…
P
Printables
F1 Logo, Formula 1 Racing - Fridge Magnet (Hot-Swap, Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
P
Printables
NFC Fridge Magnet
This print allows for a standard NTAG215 NFC chip to be used on a metallic refrigerator - no need for specialized, expensive chips. Designed for use with neodymium magnets from Harbor freight and any type of commonly available filament.…
P
Printables
Rosenlew, AEG, Zanussi, Electrolux fridge door bottom shelf
Replacement bottom shelf for most Rosenlew RJP fridges and some other brands and models. To see if it fits your fridge, check if the replacement part for your fridge has this SKU number: 264601903 Prints in 3 pieces with holes for…
P
Printables
Biltong Fridge Magnet
Chances of Biltong - i attached this fridge magnet to the side of my Biltong Box The arrow can be moved as it attached by a magnet The 5 wedge pieces (Low , Moderate , High , Very High , Extreme) are in individually printed using the CFS…
P
Printables
Dometic RV fridge door keeper
In storage, you want to keep the doors open to prevent mildew, but not have them flailing around. This door keeper solution is for Dometic brand fridges with an upper freezer and lower fridge, with a 2" wide metal strip across the front.…
P
Printables
Chilli Sauce holder rack for fridge 30mm bottles
Simple holder for 24 chilli sauce bottles or other 30mm bottles. Printed in PETG with 0.2mm layer height.
P
Printables
Fridge Pen Holder
Quick design of a fridge pen holder to replace a broken one. My design but inspired by the original. Infill = 100% Layer Height = 0.25mm No support
P
Printables
33cl TPU can lid and fridge magnet holder
Ever knocked over a half-full soda and watched your keyboard take a bath? Not anymore. This TPU lid is tested with standard 33cl cans (Pepsi, Coca-Cola, and various beer brands). While these Lids are watertight, do not expect cans to stay…
P
Printables
Fridge/Freezer Latch - Non Locking
This is non locking, reversable Fridge/Freezer latch to keep the doors from opening. Use double stick adhesive pads for installation. Buttons are designed to snap together, pressing on a hard flat surface. Printed in PETG, Latch is 15%…
P
Printables
Heart Fridge Magnet
Design Concept This heart fridge magnet combines simplicity with charm, making it a perfect decorative accessory for your kitchen. Purpose It serves as a functional magnet to hold notes while adding a personal touch to your refrigerator.…
P
Printables
Medal -> Fridge Magnet
Turn any medal (marathon, sports, whatever) into a fridge magnet. Originally designed for 8 nos. 10x5x2 N35 magnets, friction fitted without glue. You might be able to use just 4 N52 magnets. Printing parameters: walls loops: 2 infill:…
P
Printables
New Land Rover Defender center console tray for (no fridge)
This is a small tray to fit in the top of the center console of a 2020 or newer Land Rover Defender (without the fridge option) to provide easy access storage. It is a tight fit needs sanding around the top lip and deburring to make it…
P
Printables
Naruto Kunai Fridge Magnet multicolor Remix
Same as the original, just colored for printing with AMS
P
Printables
"Bar Fridge" rack support bracket
Hola! Here's the 3D model (SVG extruded via OpenSCAD) for the fridge rack bracket I tried making it a bit thicker while staying in the dimensions so it is a bit stronger, original one is made from cast metal and the fridge has racks with…
P
Printables
Adventure Time Poo Brain Horse Night Light/Fridge Magnet
You can print just the horse to use as a fridge magnet or everything as a night light. I designed this to be made multicolor without a automatic filament swap system. The magnets are 10x5mm and the bulb is just a standard night light bulb…
P
Printables
Fridge Wheel Replacement
Fridge Wheel replacement for a Kenmore Elite Fridge. Nothing fancy, but it does the trick. Print in PETG
P
Printables
Wineglass Fridge Magnets: Love is Blind
These mini wine glasses add some functional and classy flair to your fridge! Designed for a small circular magnet that's 1mm thick and 3mm in diameter, but model can easily be adjusted to whatever magnets you have on hand by putting a…
P
Printables
Magnetic fridge note and pen holder
Just printed it so I'm not sure how it will behave. All I can say for now, is that the pen does not fall off when you close the fridge, and that's a win in my book ;) printed on Creality K1C Generic PLA 3 wall loops used 6x2mm magnets…
P
Printables
Kinder Milk Slice fridge organizer
Fridge organizer for Kinder Milk-Slice or Monte snacks. Holds five of them. Print two organizers to fit whole box. It has separator inside so the snacks don't fall when there are not too many. Print settings: 0,2 layer height "print…
P
Printables
Super mario question block whiteboard/fridge organizer
Organizer with a mario question block shape. The main block measures 90 × 90 × 50 mm and attaches securely to whiteboard/fridge. Designed with five magnets slots: Four slots 20 × 10 × 2 mm One 17 × 17 × 2 mm Magnets and parts should be…
P
Printables
Sheet Tray Fridge Spacer/support
Recently, I've been making quite a few bagels. Many recipes have a cold-proofing step, which you do after forming the bagels into rings, which develops flavor and lets the bagels slowly increase in size. I don't have multiple free shelves…
P
Printables
Toblerone fridge magnets
Simple fridge magnets that look like Toblerone pieces. Print 2 edge pieces and however many middle pieces you want. Important: There is a pause at layer 33 (around 23 minutes) so you can place the round magnets in the slots. Thank you! If…
P
Printables
Retro Vintage Refrigerator 3D Printable Model – Classic Kitchen Fridge
Bring timeless character to your interior scenes with this Retro Vintage Refrigerator 3D printable model. Featuring a classic rounded silhouette, dual chrome-style handles, and lower vent detailing, this fridge captures the iconic…
P
Printables
Fridge Tube holder
Inspired by a Tschibo sale my sister asked for only one row of it. I added the 2 circles to prevent fall over. the other glasses that go in front of the tubes can stand on top.
P
Printables
Milk Jug Fridge Magnet
I made this simple fridge magnet based on a US 1 gallon milk jug. I included my file which has pockets designed in for 6x3mm magnets but also a solid model so that you can use modifiers in the slicer to add your own magnets as desired. If…
P
Printables
Generic U-Hook Fridge Door Shelf remix
Replacement fridge door shelf container for u-hook mounts.
P
Printables
Choreboard (Tabletop and Fridge Variants)
A chore board with slots for switchable inserts, designed to be placed on a table or attached to a fridge door with magnets. Includes a stylized basket to hold the inserts when they’re not being actively used. Perfect for organizing…
P
Printables
0x2a's Fridge Handle
This adds one or more handles to your fridge. I used two cut-to-size metal pipes from an no longer used ikea shower curtain setup to create the handles. Similar sized tubes should work too. The two printed parts are placed below and above…
P
Printables
jenny wren fridge note clamp upgrade (tube for pen)
Sick of all the magnets on my fridge, I thought I would cheer it up a bit with this.... Wren birdie Note clamp for doors (Where magnets dont stick) walls or the fridge.. I made the first one with chocolate filament and I thought it was…
P
Printables
Miele Coffee Machine Milk Spout Fridge Cap
This is a cap to fit the milk spout on the Miele CVA6xxx built-in coffee machine milk container lids. The cap has little ribs for a more tolerant grippy fit, and I made it a little chunky so it's easier to handle. Sizing: You don't want…
P
Printables
Magnetic Fridge Organizer
Installation: 3x Magnets 12x2: The back of the model has 3 holes for it. Print Settings: Layer Height: 0.20mm Infill: 15% Walls: 2 Supports: Organic Tree. Creation Process: This model was designed manually using CAD software Photo & Setup…
P
Printables
Lamona Fridge Fittings Door Replacement
Fridge door stopped open with integrated door. Simple replacement for 'fittings kit' specifically the part that connects the fridge door to the cabinet door. See: https://www.lamonaspares.co.uk/p/fiittings-kit-a4647520100 Print with…
P
Printables
Samsung fridge RS22T5200S9 water/ice dispenser drip tray
This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).
P
Printables
Magnetic Symbols for Calendar Planner / Whiteboard & Fridge Organizer Set
This collection of minimalist 3D printable symbols is the perfect tool for organizing your daily schedule on fridges or whiteboards. Dimensions : 30x30x3.5 mm [2.5mm base + 1mm symbol] Each symbol features a recessed slot for magnets up…
P
Printables
Magnetic Pet / Cat / Dog Feeding Tracker - Rotating Dial Fridge Magnet
General A compact pet feeding tracker designed to prevent accidental double feeding. (Unfortunately for many pets ;-) ) Simply rotate the dial to show the last feeding time, making it easy for everyone in the household to see when the pet…
P
Printables
Nuke Fridge Magnet - No AMS or MMU
is a fridge magnet shaped like the iconic radioactivity symbol , designed for easy printing, reliable assembly, and a distinctive surface finish. The model consists of three precisely engineered parts that snap together securely without…
P
Printables
Fridge Water / Ice-maker hose bracket
Fridge Water / Ice-maker hose bracket Are you tired of the hose getting smashed behind the fridge? I need a 10 foot hose to be able to pull out the fridge to work on it. I was tired of the hose piling up on the floor behind and not being…
P
Printables
Fridge utensils
To assemble the can dispensor, simply superglue the respective parts with each other like in the diagram. Right leg on the right side and the left leg on the left side. Distance between each like slide surface doesnt matter, try keeping…
P
Printables
Profilo Fridge Door Shelf (BD2055WFVN)
I designed this model after my original part broke, and it fits securely in place while maintaining good strength for everyday use. Material: I used PLA and it works but PETG recommended for better durability. Layer height: 0.24 mm…
P
Printables
Simple fridge magnets
I needed some child-safe-ish magnets, so I desinged 9 different shapes, in which you can insert a magnet during printing, so the magnet is encapsulated in the print with no way of getting out. Dimensions Magnets needed: Round 8 mm…
P
Printables
Fridge Card Holder
I needed something to hold all the grad party invites rolling in. Putting each one on the fridge was taking up too much space, so I created a simple holder to keep them all in one place. This uses 6mm x 3mm magnets as those were the only…
P
Printables
Samsung Fridge shelf
Needed the plastic part that hold condiments in the shelf of the fridge. Ours broke so came up with this quick design in OnShape. hope it can help others. Glue the two half's together then its a press fit and snaps right in. Designed for…
P
Printables
Tiny Valhalla Axe Fridge Magnet Remix - Single Piece
I combined the three separate pieces into one piece to offer a simpler version to print for those that don't want to print in separate colors and assemble. My version is very scaled down so the magnets won't fit, I cut up sheet magnet to…
P
Printables
Batman Fridge Magnet - Fan-Art - No AMS or MMU
A Fan-Art Batman Magnet. A clean, minimal, and well-balanced Batman-themed fridge magnet , designed for easy printing, reliable assembly, and a distinctive surface finish. The model consists of three precisely engineered parts that snap…
P
Printables
Superman Fridge Magnet - Fan-Art - No AMS or MMU
A Superman Fan-Art Magnet. A clean, minimal, and well-balanced Superman-themed fridge magnet , designed for easy printing, reliable assembly, and a distinctive surface finish. The model consists of Two precisely engineered parts that snap…
P
Printables
8-Bit Game Over Fridge Magnet (2x 6x2mm Magnets - Remix)
A remix of the “8-Bit Game Over Fridge Magnet” (medium version) with an updated magnet configuration. This version replaces the original 12x3 mm magnet with two 6x2 mm neodymium magnets (0.24x0.08 in), making it easier to find compatible…
P
Printables
Fridge Door Shelf (compatible with GE 239D24980)
Door shelf compatible with GE part number 239D24980. Compatible w/ WR71X11046/AP5669527/2692259/PS6883669 but deeper.
P
Printables
fridge handle
I made this handle because our fridge was hard to open when it was opened recently. Then the suction force was so great that when trying to open the fridge the whole fridge moved instead of the door opening. This was becoming a thing that…
P
Printables
Fridge Deodorizer
Mess-Free Fridge Deodorizer Simply fill with Baking Soda (sodium bicarbonate) I went through many iterations and a lot of trial and error to get this version right! This deodorizer is designed to maximize airflow—letting the baking soda…
P
Printables
Kinder chocolate bar, keychain and fridge magnet
🇺🇸 🇬🇧 Printable model of the famous Kinder chocolate bar . The dimensions and details are lifelike reproduced. There are three models: the regular chocolate bar, the keychain, and the magnet. Easy to print, no supports needed . Lifelike…
P
Printables
Delonghi Rivelia Milk Carafe Fridge Shelf
Just upgraded to a De'Longhi Rivelia, and wanted to be able to have a dedicated place to store it. Didn't fit on our fridge door, mostly due to mustard/mayo/hot sauce inventory levels. These clamps slide on to my size fridge shelf, and we…
P
Printables
Donut fridge magnet
Add a sweet touch to your space with this donut-shaped fridge magnet! Inspired by a classic frosted donut with colorful sprinkles, this design brings a fun and playful vibe to any magnetic surface. The rounded shape and layered “icing”…
P
Printables
Parametric Fridge Key Generator - GE Mini-Fridge
GE Mini-Fridge Replacement Key (Parametric & Magnet-Ready) The Problem: Lost Proprietary Keys If you’ve lost the factory key to your 2005-era GE mini-fridge (or similar models), you know the frustration. Buying a metal replacement online…
P
Printables
Samsung Fridge Water Dispenser 5mm LED Holder
This is a simple holder designed to fit a standard 5mm LED into the unused slot in a Samsung fridge water dispenser. It provides a clean and secure way to add custom lighting, improving visibility when dispensing water or giving the…
P
Printables
Shri Swami Samarth Maharaj Fridge Magnet
Any filament type of your choice Model need 7 gram of filament Using 3x6 mm magnet.
P
Printables
Fridge Bin/Basket
Originally created to fit costco pack of uncrustables, but by the time I printed out all uncrustables were eaten. Now use to fit tubs jars, tubs, drinks, etc. Nice to just pull the bin out a pick what you need verse scrambling to pick…
P
Printables
RV fridge lock Coleman 17b / 17R may work for other camp trailers
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
P
Printables
Push pin fridge magnet
I was looking for magnets for my whiteboard and really liked this one https://www.printables.com/model/1817-push-pin-fridge-magnet But I only had 8x3mm magnets at hand, same as are used for MK3S extruder visualizer, so I just made my own…
P
Printables
Fridge Magnets
Use 8x3mm magnets. The train was painted by hand. Added a template for the cassete, if you want to make your own. Hope you like it. Edit 2026: I added magnets of the Zodiac signs.