Klarstein 201L Beer Fridge - Shelf Extensions
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.32 – €1.62 net (excluding VAT)
For file: beer_fridge_shelf_support_base_0.2mm_PETG_MK3S_1h41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.47 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.68 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shelf extensions to extend Klarstein Fridge-Shelves by 5mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This model extends the shelves of the Klarstein frides by 5mm, exactly the same length of the ledge they normally sit on. That means, if the shelves start to slip off the ledges of the fridge, these extensions will fit perfectly, and keep the shelves from falling. The top surface of this model/fridge-shelf has been specifically designed to not interfere with any bottle sitting on the shelf or sliding out.
Screws used are M3 x 10mm (PH1) countersunk, nuts are M3.
These extensions are only needed at the front, and only needed if you continuously load the shelves to max. capacity! (in my case, 31kg per shelf (18L of beer + 12.96kg of glass bottles))