Klarstein 201L Beer Fridge - Shelf Extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf extensions to extend Klarstein Fridge-Shelves by 5mm.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This model extends the shelves of the Klarstein frides by 5mm, exactly the same length of the ledge they normally sit on. That means, if the shelves start to slip off the ledges of the fridge, these extensions will fit perfectly, and keep the shelves from falling. The top surface of this model/fridge-shelf has been specifically designed to not interfere with any bottle sitting on the shelf or sliding out.
Screws used are M3 x 10mm (PH1) countersunk, nuts are M3.
These extensions are only needed at the front, and only needed if you continuously load the shelves to max. capacity! (in my case, 31kg per shelf (18L of beer + 12.96kg of glass bottles))