Liczymy pasujące modele…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
Simple toilet paper roll holder with a phone shelf that uses a separate mounting bracket to hide the screws. Designed with optimal layer orientation for 3D printing to ensure the roll holder part is less likely to snap off (layer lines…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
I love the split flap clock by AlexY, and the beautiful case for it by Jacob Lightfoot, so I designed this shelf so I could attach it to a pegboard. I printed it in ABS, PLA would probably be fine but the clock has some weight to it so I…
This is a shelf from my antique oil lamp. Use supports all, will print great and looks great too!
Filament Spool Shelf brackets. I am using 7/8 wood dowels from Home Depot (but can also use 22mm stock as per the original bracket . I added #6 Flat screws holes to my design to screw everything in place. I used #6 in ¾ in size. The…
Hello! I needed a mini-shelf for my Raspberry PiCam so I tried to design one even though I had never modelled anything (not being an engineer or anything of the sort, I don't have the slightest clue about material strength and such…
Shelf which perfectly fits on the side of an IKEA SMÅSTAD loft bed. Has the following features: Mounts to the side of the bed. If you want to have it fit to a corner please check out the original model Shelf dimensions: 228x190mm Clamp…
We ran out of space on our bookshelf, so now we have to place books in two rows. To make better use of the space, we want to add an extra shelf board a bit lower than the normal book height behind the first row of books. I didn’t want to…
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
Showcase your prized Hot Wheels or other 1:64 scale die cast cars in style with this custom 3D-printed display shelf! Featuring a sleek, tilted design, each compartment perfectly displays up to 10 cars, making sure they stand out from…
Decorative shelf bracket Printed in PLA / 0.4mm nozzle / 0.2mm layer height.
Add wide shelf to support Benchy model in pair with OrcaCube(with and without footprint) Add low wall(55mm) to save some filament(55mm is enough to fit Benchy model) Convert all(include original) parts to .step format Suggested settings…
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
The old chrome plated brackets had become more corroded than I realised. I didn't want to drill more holes in the tiles so decided to make brackets to match existing. These are the result using Fusion as usual, apologies regarding the…
It is a shelf to be hung on the door of a cupboard in the kitchen or bathroom. Use strong double-sided tape to attach to the door.
It is a shelf to be hung on the door of a cupboard in the kitchen or bathroom. Use strong double-sided tape to attach to the door.
A Shelf Pin Jig I made becasue I had to fit some shelves to a cabinet I built and didn't want to pay for one. It is heavily inspired by the jig uploaded by hashtagsheep, but I changed because I don't have a self-centering drill bit. Holes…
you can scale it to your liking :) leave a like and a download if you like it :D hehe
Shelf Bracket with Cat Head! For best results, rotate bracket and place on cat head side on bed (see last photo). No supports needed. STL file dimensons: X: 5.5 inches Y: 3.17 inches Z: 7.39 inches STL can be enlarged to any size needed…
After digging through my set of different bolt and screw containers, I decided enough was enough and designed a quick and simply storage shelf for the boxes. Model is pretty thin and designed to use as little filament as possible while…
Incase anyone has exactly the same spatula set as I have, here's a single GEOWS plate to store them.
It is 180mm deep and 120mm high but you're welcome to make it your own size I printed it with 15% infill and PLA. It took 2h45min on the Ender 3v3 Plus
This is just a resized version of an existing shelf, this one fits Zuru Mini Books Brands
Pen Slide, an almost horizontal pen/pencil storage shelf that fits under my monitor for keeping pens & pencils etc. organized. Enough slope that the ends are slightly elevated for easier selection. No supports needed. Maintain R/L leg…
I made this for a shelf I use a lot. Helps to organize smaller things and maximize space. It's for https://www.thingiverse.com/thing:2110961/makes which is an incredible shelf with no love on thingiverse
Strong shelf pin for Ikea and other brands, with filament insert. I needed replacement pins for the shelves. I was worried about their strength when printing. That's why I designed them with an inner hole, into which superglue is dripped…
Print 1x base and 3x peg - depending on your printer pegs may need a drop of super glue... or not :)
A simple shelf for holding multiple molds in a pressure pot, its a 9 1/2in diameter pressure pot. the cone and ball make a simple handle, see picture for orientation, there is a divot in the ball for the top of the cone, I used super glue…
MUG SHELF, 200x200x12 mm HEIGHT. (ESTANTE PARA TAZAS, DE 200x200x12 mm DE ALTURA)
Jednoduchý uhlový spevňovač police od Moebelixu. Kúpená polica obsahuje iba dve dosky zlepené a skolíkované. Zdali sa mi veľmi labilné a pri väčšom zaťažení by hrozilo rozlomenie. Na krajoch police sa uholníky iba nasadia a pokiaľ budú…
Warning!! You may need to change the orientation of your models to print Things needed: screw M4 20mm min. 6pcs-8psc screw M4 16mm min. 2pcs-3pcs nut M4 min. 8pcs-11pcs Optional: 4 wood screws Print settings: Infill 5% Supports: NO…
Variation on a window shelf that fits my vinyl windows inside. it just presses over the inside flange and holds 15mm via
A Google Home Mount remix to mount to the edge of a shelf. One version with a lip to align with 18mm (5/8") shelving. One version flat on the back for assorted applications. Edit: Lip version fits Shelf Edge Cap print.
This is a computationally optimized shelf bracket, designed around ~100lb (~440N) loads, although I'm fairly optimistic it can hold more than this. When printed vertically, it uses no support material. It is incredibly strong for its…
Grow large plants on all shelfs of your Gen 3 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a…
About the model: Have you got a small desk? Would you rather tuck your keyboard away when not in use? If so, this could be the solution for you! (Actually, it was a solution for my bluetooth keyboard, but you can probably borrow it too).…
Need more space for equipments or some part of printed project? I didn't have enough space on my desk, so i made this model that can organise your desk too (If you gonna print on high speed use 2 tree supports on each sides of hexagon to…
This small shelf was made for holding a phone or tablet. you will need the following to assemble this shelf: 4x M3 bolts 4x M3 nuts 4x wood or wall screws (for the mounting)
I designed this brackets to be used in combination with cheap 15 mm diameter metal 'central heating' tubes to make a filament spool shelf. I used one: 15 mm x 1,2 mm x 2m and cut it in half. I costed me less then € 5. Printed with PLA+…
A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch). It uses a thin flap between the side and the board to increase the stability (without, it would just bend inwards). I…
A small shelf for holding decorations and small items. It's made to be attached using the 3M easy attachments or any adhesive. I use them to display Lego builds and other small figures.
We've all printed more benchys than we want to admit. Now, with the benchy organizer, you can display then in an orderly way. supports not necessary. It might take a bit of force to get the rod into the stand. Note: this is still a work…
Provide your houseplants with the extra light from your Rise Gardens with this houseplant shelf. It's designed to attach perfectly to your gardens shelves and you can use up to 6 per garden. Designed to fit 8 inch plants. Compatibility:…
A simple shelf to mount an Ikea Vindstyrka and Amazon Alexa Echo on the wall with holes to allow cable routing through the bottom. If you would like the exposed infill as per the pictures, I have uploaded the modifier shape to allow…
A idea to lift your shelf off the ground and make it able to be easier to use. the size of the shelf this was mad for is 150 x 41 x 39, (height, widest, depth). this should work with any shelf from 2013 - 2025(current).
Great for displaying Hot Wheels collection, easy to print.
Printed flat on the bed with no supports. The 3 holes for the wallmount are 5mm. The 2 holes for the shelf are 4mm. It has an overall dimension of 250 x 220 x 23mm. Printed mine in Extrudr PLA NX2 Matt. In the pictures I used a 30cm wide…
Super simple design, easy to print, easy to use. Drill a 8mm hole in the shelf to hold it
With this modular wall shelf you can put your things on display in a creative fashion. Print the compartment sizes you need and assemble them in any which way. You can easily extend the shelf with more pieces as needed. The separate "1x1"…
Instructions: Filament Usage Note that printing 8 “sticks” will consume approximately 570g of filament. Material Considerations Each stick is 16mm thick, largely due to the screws used. However, if you use thinner screws or adjust the…
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
A small shelf design that can be mounted on a screen mount behind a monitor. It can hold small items such as pens, USB sticks, and other small objects that take up space on the desk. The mount itself is designed to fit a 100x100 mm mount.…
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
A practical holder for the AeroPress coffee maker, designed for storage or air-drying. It can be easily mounted under a shelf using wood screws. When not in use, the holder remains unobtrusive and takes up minimal space. The AeroPress…
Shelf I made for my Weller. I didn't want it to be too specific to the purpose in case I want it for something else.
First, let me say I am sorry about the image quality. This is a filament shelf bracket designed for ½ inch dowels. It was modified in FreeCAD. I would print this using at least 4 top/bottom layers, 3 walls and 20% infill (I use infill…
Shelf Riser. You can easily adjust the height and width in the Solid file.
Hi Folks! I created a simple shelf mount for my Speed Champions F1 Cars. Don't waste space on your shelf anymore :) print glue the two parts together screw it in place Have fun! Printed with default .2 settings. No Support needed. Place…
Shelf mount that can be placed on the french cleat wall mount in order to use planks on the wall
Filament Shelf Bracket It's a filament shelf bracket. -50% gyroid infil -0.2 mm layer -PLA or PETG -Max weight 5-7kg Additional parts: -22mm Ø pipe (metal or plastic) -Screw with conic head
I made a pretty strong version for my vivarium purpose. You can screw in the screw in it.
Prints on it's back, scale to any size! No supports needed! Holds 12 minis. Can be hung on wall too!
Hey! I designed a simple, easy-to-print set of shelf brackets. I recommend using my print profile if possible (it was prepared in Bambu Lab) - but if not, at least make sure to orient the brackets the same way I did (see screenshot).…
Uses pan head screws for both adjustment holes and end attachment. The screws should thread into the part, so print with several walls. I printed in abs, but other materials should work as well. The parts adjust from approximately 210mm…
1. Add a hole for screw. 2. support a bit wider ziptie. Thanks for @russdogg creation!!
Filament Spool Collar – Anti-Roll Swatch for Shelf Storage Designed by Jakub Skála This simple yet effective collar keeps your filament spools in place and prevents them from rolling off your shelf. Designed to snap around the spool and…
You will need 2 x 1-inch (25.4mm) diameter pipes (any material, the loads are very small). M5 threaded inserts are used and space was designed for them to be installed conveniently, M4 inserts will work in theory. 4 x 12mm long screws are…
Was redoing my capture setup and figured there must be a better way than letting my XR1 Lite just chill on the ground under my PC. Seeing as my PC sits on a wire shelf, I'm sure I can just jump into Tinkercad and quickly whip something…
Neat little rack for sandpaper storage. every shelf swings out, so you can store it all neatly packed. Models are designed to fit a 37mm bearing, and a 12mm threaded rod. Can be made as tall as you want, with how many you want. Shoot me a…
Screw-on model (black) Dimensions: 12mm diameter, 7mm height It's designed for 4x20mm screws. I suggest printing it in TPU (with 100% infill or max walls) – this way you can tighten the screw a bit more, which will squish the printed part…
Supermarket Accessories Removal Unlocking ESL Disassemble Tool for Digital Electronic Shelf Label Price Tag Holder
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
This is a shelf I made for myself to set my Ego Charger on to free up space on my toolbox. I had multiple people ask about it and I didn't save it so I recreated it in a few different variations to save time and material.
Unique Shelf that can hold a small thing on the bottom and a small thing on the top. I have not tested it, but it should print fine with supports.
I modified the pegs to fit a standard pegboard (US). I also strengthened the part and lowered the top corner.
Shelf riser for DEXP RF-SD090RMA/R refdigerator. May also fit some other fridges with same shelf mounts. Allows fitting more 1L and 1.5L bottles without removing top shelf. Print each part normal + mirrored (4 parts total).
this just a simple shelf I made, its the 3rd version of the design, if anyone would like to remix it they can. it should be printed with 5% infill and 3 to 4 walls.
Due to limited table space in my setup, and I wanted a nearby place to place buildplates somewhere to cool down and start more prints. I decided to make a fairly simple shelf for this purpose. There is also a Gridfinity shelf option,…
Max Payne game character If you enjoy my content by me a coffee. Thank you for support beforehand :) https://buymeacoffee.com/MRinlandcost Commercial License If you would like to print and sell my work in link below you can find my…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
This modern “welcome” sign is designed to sit perfectly on shelves, mantels, or picture ledges. Featuring a smooth script font and clean, freestanding design, this sign adds a warm, minimalist touch to any decor style—whether rustic,…
This is a small shelf to hold a permanent marker like a Sharpie. I use it on my kitchen table so I always have a Sharpie close at hand while I cook.
A towering display shelf inspired by biomechanical architecture, this XL Biohorror Wall Shelf brings eerie sci-fi detail to any space. Sculpted in a Giger-style aesthetic, it’s designed to hold figures, masks, or collectibles with…
About This is an insert for the driver's side dashboard shelf on Renault Twingo 2nd generation cars, for left-hand drive variants. If you have a right-hand drive Twingo you may need to mirror the model. The model is derived from a…
I post videos on YouTube about gadgets and desk setups. It would mean a lot to me if you subscribed to my channel. Click here for the channel --------------------------- I would like to express my sincere gratitude to everyone who…
Roborock Saros 10R does not come with original plumbing kit, but there are aftermarket options online. They however, do not fit nicely in the original dock, with hanging pipes and wires. This model solves this by extending the dock…
I had made a pool equipment hanger to go on my fence previously (Check my other model if interested), and just reused the dimensions to make a bracket to hold up a shelf. This bracket holds a 5.5" wide shelf board, a 1" x 6" board is…
This is a shelf to hold my Traveler Guitar on my wall. I like to hang my guitars up but as the Traveler Guitar does not have a headstock, a shelf was needed. Thus shelf has allowances for a strap to be attached while it is on the shelf,…
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
