1 / 3
Leg extension for home depot HDX storage shelf/rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
100mm Leg extension for HDX storage shelf
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 579
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a leg extension for the HDX storage shelving unit from home depot.
It extends the height by approximately 100mm.
I printed mine with my Prusa Mini+ in PETG at 0.2mm layer height, no supports needed.
The fit should be a lightly snug slip fit.
SAFETY TIP: I highly recommend using a wall strap or something to secure the shelf to the wall to prevent tip over.
(You may notice some text in my prints, don't worry the model has no text, I was just testing the prusaslicer text tool)
I included a print file for prusa mini.
Happy printing!