HEXAGONAL MODULAR SHELF / STRUCTURE FOR PRUSA RESEARCH MAKER FAIRE PRAGUE BOOTH
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models.
- Ocena
- 0 / 5
- Polubienia
- 89
- Pobrania
- 242
- Wydruki
- 1
- Wyświetlenia
- 4816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018.
We used it to display printed models.
10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the prisms are the same length - you can shorten them as well as extend them.
The structure consists of 35 solids. One solid is made from:
• 3D printed plastic corners ( 24 pcs)
• Aluminium prisms (36 pcs)
• Plexiglass laser-cut (1 pcs)
All the spheres are assembled together with zip-ties (of course, what else...)