1 / 4
Hole cover for 5mm pre-drilled shelf levels - IKEA PAX and others — zdjęcie 1
1 / 4

Hole cover for 5mm pre-drilled shelf levels - IKEA PAX and others

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Finish Ikeas job and cover the pre-drilled holes you do not actually need with a blossom.

Ocena
0 / 5
Polubienia
7
Pobrania
27
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ikea systems are quite versatile to fit a large range of customers wishes with one model.

This however means, you have to deal with the cosmetic flaw of uncovered 5mm holes all over the insides. From pre-drilled options for board placements you do not actually needed.

Now you can cover them with these blossom plugs for a more finished look.

  • Model is optimized to fit the 5mm holes even with excessive stringing on the printed part. Which will definitely occur with most filaments i tried. 
     
  • Its advised to melt possible stringing while the print is still attached to the build plate. You will very likely want to print 48 or more on one plate. And it would be super tedious to clean them all individually.
     
  • 3mf build plate file with 48 copies attached.

Tagi