Stackable Shelf for Raspberry Pi Argon One V2 or Other uses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a simple stacking shelf that is designed for the Argon One V2 Raspberry Pi 4 case.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 510
- Wydruki
- 8
- Wyświetlenia
- 2255
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available.
You can print as many of the “Stackable Shelf” models as you want and they will stack together. Then print a “Top Self” model and that to sit onto finishing the stack.
I designed the holes for stacking to have a 0.2mm tolerance so should work on most printers.
This was printed using 0.4mm nozzle and PLA+, no supports were needed.
This was designed in Onshape and a link to the model is provided. All of the measurements are variables and can be adjusted to make the shelving the size you require.