1 / 2
Fridge inserts: transport spacer for Camper and Caravan — image 1
1 / 2

Fridge inserts: transport spacer for Camper and Caravan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.84 – €1.03 net (excluding VAT)

For file: Fridge_spacer_0.2mm_PLA_MINI_1h4m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.93 excluding VAT (range midpoint).

Weight reported by the author
9 g
Print time reported by the author
1.06 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Simple inserts for the fridge. Especially for caravans. No rattling no breaking of bottles. Easy to print!

Rating
5 / 5
Likes
792
Downloads
2,649
Makes
17
Views
8,839
Reviews
13

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your refrigerator compartment yourself and you won't have any annoying smells.


In the following picture you can see the measurements. I think this should help to see if the spacer will fit in your fridge.

Size adjustment

The fridges could be diffrent. Constructing a spacer for every fridge is very time-consuming and, thanks to the slicer, not necessary. You can adjust the size directly in the slicer with the scaling tool.

Print description

In principle, you do not need any support for printing. Simply place the top area 
as in the picture above on the hotplate.

Filament: PLA is sufficient for this print. If the requirements for stability are higher, you can of course also use other materials such as PETG or PC-CF

Layer thickness / mode: 0,2mm 

Infill: 20% for stability 50-100%

 

I wish you a happy print and I am happy about your experiences!

Greetings LPS

 

Tags