Counting matching models…
BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the "Powerhouse" edition of my octagonal battery holder system. These 4-row wide grids are designed specifically for large-scale energy storage projects, such as home powerwalls,…
The Cosmic Nomad V2 is a 17.2cc HPA dump tank used to power nerf blasters. While that much air volume lets you do some crazy nerf feats, there are a few instances where you'd want to use these spacers to reduce the overall volume. I…
Instead of measuring and printing a basic rectangle to act as a spacer each time a drawer was reorganized, I created this adjustable spacer. The teeth are spaced ~3mm and the clip can slide to the appropriate position and will stay in…
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
Some time ago, I inherited an American Silver Eagle that was not encapsulated. I ordered a package of 25 direct fit H-40 capsules thinking that I could also encapsulate some old large dollars I had, but I didn't realize the Silver Eagles…
The box for this game is obnoxiously big and the lid never stays shut. I created a spacer that allows all the components to fit into one of the drawers and cut the lid off the box and reused it as a lid. Print Settings Printer: BIBO 2…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
This Sencor SFD 851GR Spare Drying Tray contains two parts, so you can use just the frame and make a space for filament with it. The model is bigger, so you will need bigger printer.
Simple spacer that raises the switch by 2cm. It leaves a horizontal cooling channel below. A fan placed on the side can cool both the Flex XG and the device below it. It's designed to rest inside the switch's wall mount cutouts and…
Hi Guys, I created a spacer for the Shotgun Pro Seat. It works with every bike that has the Acros Cable intergration through the Headtube. Just directly put the Shotgun Spacer Cable directly onto the Top Cap, where the cables are coming…
simple 12mm thick spacer for wall mounting hand sanitizer units so you can still access the buttons for bottle replacement. Spaces the back side of the sanitizer off the wall when you have have trim or door frames on either/both sides.…
I needed to lift up my linear rail slightly to use the NeedItMakeIt Y-axis Linear rails, so I designed this. It would be suitable for anyone who ever needs a shim for a MGN12 linear rail, for any purpose
This spacer supports the fins on a baseboard radiator. It fits on top of the struts that hold up the heating pipe and spreads the load across several fins.
I downloaded the “Screw Lock for Klipper” bed ( https://www.thingiverse.com/thing:6070269 ) from xand3r40r93 and printed out matching spacers with TPU 95A. It works flawlessly and is bombproof, and it can hurt your fingers when adjusting…
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
During the kitchen restoration I have been worried I would make a simple mistake and mix up hot and cold water pipes. This small set of clips helped me to make sure I don't du such a silly mistake. Further more I wanted to maintain…
This 3D-printed spacer block is meticulously designed to adapt the Tapcooler Nanocanner for compatibility with the BenchMK Drill-Powered Can Seamer. Engineered for precision, it provides a secure and accurate fit, improving both the…
This precision-engineered spacer is designed for TV mount installations. Key specifications: Length: 21mm Outer diameter: 15mm Inner diameter: 3.95mm Material: PETG Infill: 100% Optimized for strength and durability, this spacer ensures…
I printed this model from simple PLA, it does not require any support. It was sliced with a layer thickness of 0.2.
Kappen für Ikea Ivar-Seitenteile - genutzt, um schrägen Fußboden auszugleichen - auch als Schutz vor Nässe auf dem Boden denkbar
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
A spacer for loose Momentum3 earcups, makes your earcups super tight 95A TPU is recommended You will need 2 for each side, 4 in total for each side you should put one under the steel headband, another on top of it, like in the photo
This is a heatsink spacer for my microinverter project . Requires heat resistant filament (ABS as a minimum), the more resistant the better. For MCINV5 / MCINV6 / MCINV7 / MCINV8.
Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…
if you have problem with your build plate being to low on your build plate you can add these spacers to make the bed higher i printed this for my creality ender 3 v3 se and depending on printer and printer settings its around 0.5mm spacer.
Use it in a fold to create a space between the non-woven masks and the lower part of the nose. The thin thread that can be made in the vent hole after the print disappears by adding instantaneous heating to the thread with Lighter. When…
This is two plastic spacers from an old IKEA wooden lamp. One is the half on which the light bulb hangs, the other is the lower spacer.
Twisted ladder line spacers 25mm conductor distance 24° twist 12mm tall 2.5mm wire diameter (with insulation) Printed in ASA, no infill, 3 perimeters. 2 part assembly that simply clips together. Separators have a 24° twist, so you will…
A spacer for LBoxx cases with hexagon patterns in the lid. Bosch does include spacers made from styrofoam sometimes but this model enables you to customize your Sortimo cases to your needs! The print profile combines PLA and TPU to print…
5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.
This is a flexible TPU spacer designed to bridge the gap between thin motorcycle mirror stems (or windshield bars) and standard phone holder clamps. Most phone holders are designed for handlebars with larger diameters. These adapters…
This spacer keeps a monitor from rocking side if fine height adjustment is used. This is important for dual or triple monitor setups with non-matching monitors. The set screw allows setting the relative height between monitors. The issue…
This is a spacer intended to go into vacuum bags pumped free of air via a manual pump pressed against the outside of the bag. Pressing the pump against the top of the bag seal also prevents the air from escaping because it pushes the top…
10mm spacer for CR-Touch on Ender 3 models, for volcano mods Category: 3D Printer Extruders
I didn't want to stick it to the wall but hang it => spacer with a hole for the screw head. Nechtěl jsem lepit na zeď ale zavěsit => distanční podložka s otvorem na hlavu šroubu.
Just a spacer I made to get a little more height out of each 6mm standoff when doing a custom cooler for a Pi 5.
Volume Spacer for Öhlins TTX 1 Air shocks. 2000, 4000, 6000 mm^3 *not tested but should work fine, just modeled after the original parts because i wanted to know the volume. Uploaded here if someone needs them
Not my original model. All files and images were created by Thingiverse user Omniverse I just wanted to reupload this file to printables so that I could add it to the boat parts collection on my profile. Be sure to go give the original…
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
Plastic bags with a vacuum valve are very helpful for storing filaments in a dry condition. Pressing the pump onto the valve during vacuuming is unavoidable, but closes the airway. To make this process easier, I have designed this little…
Spacers of different heights for IKEA Metod wall cabinets. The original size is 10 mm.
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
1. Add a hole for screw. 2. support a bit wider ziptie. Thanks for @russdogg creation!!
Just the little table thingy to hold up the middle of a pizza box. You can edit the number of legs as well as the length of the legs. Designed this quickly after a long day of work because I had a headache and just needed a simple detox…
Remix of “Patio Umbrella Stand Top Spacer”. Dimensions: Inner diameter: 34.5 mm Outer diameter: 50.4 mm Flange diameter: 60.2 mm Overall length: 68mm
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
These are spacers that can be connected to either Multiboard Plates (previously Tiles or Panels) using Dual Clips. The default files are two Multiboard units long and go from 7 mm up to 24 mm in 1 mm increments. Usually it is enough to…
📦 Description This is a 2-part printable set consisting of: 🧩 Hex spacer (nut) with internal thread 🔩 Flat-head screw with external M6-style thread → Both fit together smoothly and can be printed without supports on most FDM printers. Use…
This simple spacer is designed for rabbit hutches to slightly raise the horizontal bar behind the door – the one that keeps hay from falling out. By lifting the bar a few millimeters, this spacer helps prevent rabbit urine from pooling…
📦 Description This is a 60 mm tall printable spacer with internal threading, compatible with standard M6 bolts or screws. Great for: Mounting electronics Spacing plates or panels Prototyping mechanical setups Swapping in for metal spacers…
Unless your extremely lucky, most drawers won’t fit the Gridfinity baseplate perfectly. Since we have 3d printers we can get them to fit perfectly so the bins aren’t sliding around when you open the drawer quickly. It can be difficult to…
3D printed spacer to be used with the Robot_Retro Gamecube power supply. robot_retro store
This is a pretty rough but already functional prototype of an armrest spacer for the Alfa Romeo 159. With my height of 176 cm, the armrest height with the spacer became just perfect — before, I could barely even reach it. For now, I’m…
Karting spacer tool very handy. Use an O-ring in the back to prevent the tool from sliding out! Print: Material: PETG, could work with PLA. Standard profiles in slicer very simple.
Spacers for a wire fence / mesh panel in order to mount the mesh panel to a wall or fence. Available in two lengths: 20mm 40mm Use the appropiate hardware for your backwall (wood = woodscrews / concrete, bricks: plug + screw) Probably the…
[updated 7/2/2025] 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer. Replaces the original open cell foam that sits between the cabin air filter housing (with the interior/exterior air flow actuator) and the duct leading to the…
I couldn't get a good scale from the original posted from @sillybutts, so I re-rendered to scale. No other edits or alterations have been made. Included flat side for printing support aide, I recommend printing this at 100% Infill, with…
This is a spacer for the BMW r1250GS battery compartment. It should also fit the r1250r, and r1250RS Or any motorcycle by scaling the dimensions in slicer Designed to fill that empty gap left by a smaller and lighter lithium battery when…
Taken from the original model: Case to house the Raspberry Pi 4 + MacArthur HAT combination. It snaps easily on place and can be released without tools. For assembly use the 4 brass M2.5 16mm hex stand-offs included with the MacArthur…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
FAST PRINT I use it on my Magura MT5 Pro , but it should work with other brakes You can use this either for bleeding your magura brakes, or when traveling with uninstalled wheel It can be also used when you need to press pistons back ,…
What title says. Technical drawing attached. Recommended material is TPU, but I'm not the boss of you so print it in ABS for all I care.
Remix of a plant pot spacer where I added space at the bottom to allow air draft to pass to evaporate stale water. It also worked as a print in place, but ended up cleaner using supports on the buildpalte.
This allows the bike to be repositioned on the rack. It can raise up the front end (to increase ground clearance). It also allows multiple bikes to be put on the rack without the handlebars crashing into various bike parts, for closer…
This is to replace the spacer in for the bosch universal plus berry press attachment. I recommend using TPU with 100% infill. There's a small slice in the spacer so it can installed onto the shaft of the adjuster for the tailings.
The team is at it again with more counter surveillance tools. OUI SPY by colonelpanic.techcolonelpanic.tech SMA mount or no_SMA just to add your own m3 spacer to replace standoff. Battery holder add-on for 1000mah battery. Switch mod for…
Simple Spacer for the NRG Style QR50 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
After suffering for days thinking I had a severely warped bed I finally noticed my Y rails were sagging due to a combination of pressure from the shorter than ideal Z axis linear rods, unsupported Z axis lead screw and probably just the…
This is a Aqara U200 spacer that was created based on this model: https://www.printables.com/model/939575-aqara-u200-door-lock-spacer-step I adjusted the spacer so that it can fill the gap between my EU lock and the U200. The spacer is…
Simple spacer for a UK light switch in a few variants. Designed for a Sonoff UK T1 switch but should fit other switches if you check the size first (the opening is 88mm in cad). The CAD has a couple of parameters to tweak if you are so…
I used this to replace the original spacers as one of the small tabs did break on the original one. It replaces a 5mm and a 2.5mm spacer, so it is 7.5mm thick. Two parts to make it very strong. Print everything flat without support. Needs…
A simple spacer designed to fill the gap left when installing aftermarket bar ends (like weights, mirrors, or protectors) that do not have the T-slotted end found on many OEM (Original Equipment Manufacturer) handlebars. This part ensures…
use with stock spring 15%infill with no supports Please download, like, and/or share
As the original, this remix is inspired by: Stealing Noctua's quiet airflow mod Compared to original design, this is more aerodynamic and optimized for radiators. Use auto-orient to get better face on the print bed if you're not sure. I…
Hotend Spacer for TZ 2.0 Rapido and others its 1mm thick, adjustable in the slicer.
This Spacer is a functional part essential for mounting the Orbiter V2.0 Extruder onto the DragonBurner Toolhead (specifically used on a The100 Tank printer build) The primary function of this part is to correct the axial alignment…
UPDATE [4/30/26]: In lieu of Libernovo changing the hollow square slot to be solid, I have designed a newer version that will work with all models and is stronger. After taking apart my armrest after months of using the first version, I…
This spacer raises a light similar to a Hyger aquarium light up by about 3 inches. Fits the 20 gallon tall rimmed tank.
Hier eine einfache Gravitraxsäule. Diverse Höhen und es können Bahnen in eine Richtung durch die Säule gebaut werden Höhe in Fusion360 anpassbar mit der ersten Extrusion (Gewünschte Höhe abzüglich 5mm) und dann nicht vergessen, die Zahl…
Purpose This spacer allows the original GPS mounting spot on the Speedybee Master 5 v2 RC drone to be filled. Hardware TPU or similar FLEX For printing the mount. Original screws To fasten the spacer.
Are you the owner of a modern Canyon Aeroad that requires headset spacer kit part #GP7447-01 ? Now you can print replacements for those spacers! You can even print them in whatever color you want, to match your Aeroad frame. If you…
I was trying to think about what to do with the spacer by the excellent organizer by @qhc_827008 and realized I could add a simple pencil holder.
Spacer for Akuvox intercom. Allows to hide excess of UTP cable. Check measurements before printing. This one is 180x100 mm with spacing thickness of 15 mm. I printed using PETG and it lives on sunny part of the building for a couple of…
this is a remix from a different user, but i changed the angle and added a groove for a gasket.
I have some filament shipped on 300mm spools according to DIN EN ISO 544. Using 2 of these spools with the Prusa XL is possible. But if the printer is equipped with the Enclosure, there is a potential blocking by the handles of the…
As an exercise in learning Programmatic CAD (OpenSCAD first, now I like build123d a lot) I designed this Gravitrax compatible spacers. The smallest ones (0.5 and 1 units) I tried to be close to the originals. For the higher ones I tried…
This model consists of cross-shaped and T-shaped spacers designed to maintain a uniform 5mm gap between wooden decking boards during installation. The geometry features vertical fins that fit between the planks to define the spacing and…
Profile created for supershark battery and Merida Ninety Six Downtube. Printed with 2 walls and 15% lightening infill has holes for cable routing This does max out my printer size.. Maybe V2 will be a 2 part model..
The SuperSpacer is the headset spacer designed for those who view their bike as an adventure companion, allowing you to attach the top tube bag above or below the stem, ensuring a solid anchor even on the roughest terrain. Furthermore,…
Original Part was pretty good design wise already. NO Supports required.
I built the weather display enclosure shared by @TheMeanCanEH_1207348 and wanted to use a 906090 battery, but I found that there was too large of a gap around the battery. I made this little spacer to fill in the gap and keep the battery…
I tweaked the spacing to work with my Govee Curtain Pros. It's pretty close to the right spacing.....
When running CPAP the filament cutter needs to be actuated from the backside of the toolhead, and thus extra clearance is needed. Works perfectly on my ender 3 NG and my Voron 2.4 with hextrudort low plus. Extra space needed: Mini sherpa…
![[updated 7/2/2025] - 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer](https://media.printables.com/media/prints/cac66c3d-f414-4c7c-9eff-302ab8076bfa/images/10106236_a72997ff-098d-4c52-a1cf-433601146e4b_2621f605-70af-4e7a-8d89-c8767bd2ce10/cabin-air-plennum-original-foam-jeep-jk.jpg)
