Gravitrax spacers 1 to 7,10,14,15 tiles high
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These gravitrax spacers are easy to print do not require supports or any glue. Height 1-7,10,14,15 tiles
- Rating
- 4.852 / 5
- Likes
- 239
- Downloads
- 2,818
- Makes
- 31
- Views
- 6,328
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
These spacers are easy to print do not require supports or any glue.
They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL.
Since they fit tight with themselves and original tiles I wanted to have some smaller ones as well to help building better tracks for my son.
Update:
I redid all the spacers because the measurements were wrong unfortunately. The original tiles have a height of exactly 1cm + 3mm for the notch. The tiles from Matthijz98 had 9.8mm per height tile + 3mm notch, which does not quite fit the original tiles.
I also added more sizes: 1, 2, 3, 4, 5, 6, 7, 10, 14, 15