Gravitrax spacers 1 to 7,10,14,15 tiles high
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These gravitrax spacers are easy to print do not require supports or any glue. Height 1-7,10,14,15 tiles
- Ocena
- 4,852 / 5
- Polubienia
- 240
- Pobrania
- 2838
- Wydruki
- 31
- Wyświetlenia
- 6367
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
These spacers are easy to print do not require supports or any glue.
They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL.
Since they fit tight with themselves and original tiles I wanted to have some smaller ones as well to help building better tracks for my son.
Update:
I redid all the spacers because the measurements were wrong unfortunately. The original tiles have a height of exactly 1cm + 3mm for the notch. The tiles from Matthijz98 had 9.8mm per height tile + 3mm notch, which does not quite fit the original tiles.
I also added more sizes: 1, 2, 3, 4, 5, 6, 7, 10, 14, 15