Liczymy pasujące modele…
Inlet tiles for GraviTrax to catch falling balls. Two types of height - 20 and 25mm available. By adjusting the direction of the tiles I place on top, I can create a 20mm or 25mm drop and change the direction of movement as I wish. This…
Inlet tiles for GraviTrax to catch falling balls. Two types of height - 20 and 25mm available. By adjusting the direction of the tiles I place on top, I can create a 20mm or 25mm drop and change the direction of movement as I wish. This…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
Here are four straight rails that can be used with Gravitrax, each spanning 1 to 4 tiles. The length is approximately equivalent to that of the original Gravitrax rails. Note : I'll be uploading separately some rails that are 1 to 3 mm…
Do you ever have a ball rolling right under that height plate? Here's the solution, a magnetic stick! I used a 13.5 mm magnet. It's not very strong, but it's enough to keep the ball right on it, and it can be put down without using your…
English: I previously encountered a Gravitrax snowflake model with a 2.8-star rating, criticized for flawed design. I printed it to challenge these assessments, yet replicated the same design flaws. Consequently, I submitted a 2-star…
Hier eine einfache Gravitraxsäule. Diverse Höhen und es können Bahnen in eine Richtung durch die Säule gebaut werden Höhe in Fusion360 anpassbar mit der ersten Extrusion (Gewünschte Höhe abzüglich 5mm) und dann nicht vergessen, die Zahl…
Level up your tracks with this optimized straight rail! This model is designed for a smooth and fast transition. Perfect for connecting distant sections or creating long straight lines. Sleek Design: Fits perfectly with the original…
As an exercise in learning Programmatic CAD (OpenSCAD first, now I like build123d a lot) I designed this Gravitrax compatible spacers. The smallest ones (0.5 and 1 units) I tried to be close to the originals. For the higher ones I tried…
Original Part was pretty good design wise already. NO Supports required.
This special type of slide dips your marble from one height to another in a special way. Thanks to the help of gravity! Any feedback would be appreciated!
f you print this, please share a picture! It helps me improve the design.
The key to the bouncy surface is to use this hack! Print Specifications Filament: PETG Specification Value Estimated Print Time (Ender-3 V2) 30 Minutes Filament Used 5.2 g Layer Height 0.16 mm Wall Thickness 5 perimeters Infill Density…
GraviTrax spacers in 5, 10, 15, 20 mm height , designed for a tight and secure fit . The geometry ensures the spacer sits firmly in place without wobble , while the reinforced lower inserts prevent cracking or breaking during installation…
Compatible with Gravitrax and Gravitrax Pro, this height stone allows for enhanced play when parts are missing. Check out my other models. kopatybilny z zestawami gravitrax i gravitrax pro dodatkowy element rozbudowujący
Compatible with Gravitrax and Gravitrax Pro, single baseplate for when space is limited. Check out my other models. kopatybilny z zestawami gravitrax i gravitrax pro dodatkowy element w postaci pojedyńczej płytki rozbudowującej. zobacz…
Compatible with Gravitrax and Gravitrax Pro, circle plate for when space is limited. Check out my other models. Kompatybilny z Gravitrax i Gravitrax Pro, okrągła płytka. Sprawdź moje inne modele.
Tired of having your Gravitrax rails to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? This model is for you. Effective & practical way to organize your Gravitrax rails (size 1, 2, 3) with…
Tired of having your Gravitrax rails to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? This model is for you. Effective & practical way to organize your Gravitrax rails (size 1 & 2) with…
This is a Model for you to create better Marble runs!!! NEW VERSION! down below The new Version can be printed completely flat and doesnt need any supports ( if bridges are printes slow and with as much cooling as possible )
Variations of GraviTrax Junior spacers, all designed to be 3D‑printed support‑less. Available variants: the original spacer height, 2× height, 4× height, and 6× the original spacer height. The spacer is printed upside down, so no supports…
This is a collection of 3D-printable parts compatible with the GraviTrax Junior marble run system. GraviTrax Junior is a child-friendly interactive marble track toy designed for children from around 3 years old. It helps develop…
Problem : Gravitrax cardboard base plates don't stay tightly attached to each other (e.g., the "puzzle piece" design detaches, plates push apart, etc.), leading to unstable Gravitrax builds. Solution : This connector functionally secures…
puzzle pieces to create a base for gravitrax. Holder with locking top is included
My grandkids wanted a REALLY long Gravitrax rail. My Bambu X1C can only print something about 250mm long, and a bit longer if I had printed diagonally. So I designed this rail system. Each piece is 4 standard rail lengths long which is…
Gravitrax Tracks Double Drop 0.4n 0.12mm PLA Prusa MK4S 13 Minutes Layer Height: 0.12mm Walls: 3
These connectors allow you to join 2 or 3 towers. There are two version of the 2 tower connector. One where the towers are beside each other. The second where the towers are one space apart. The triangle connect (3 towers) allows you to…
Printing Filament: PETG (not required) Brim: Enabled Orientation: Top Down (see photo of build plate)
I designed this staple to give better stability for adjacent items. As marbles roll there is a bit of wobble that can be introduced that might get a marble stuck. These single staples will allow a marble to roll over the top. You will…
Ever wanted to connect adjacent JDO tiles? I created this staple for the lack of a better term so that two tiles can be interlocked together. This may help increase stability for any tiles that wobble as marbles go past. This model will…
These stackable height spacers allow you to raise your GraviTrax Junior tracks to different levels. The set includes spacers with heights from 10 mm to 100 mm , making it easy to create ramps, bridges and multi-level marble runs. All…
These tunnels allow the marble to pass through the spacer instead of going around it. Two different variants are included: Straight Tunnel The marble enters on one side and exits on the other side at the same height . Slope Tunnel The…
Empty filament spools are too useful to throw away. So I wondered: Can a Prusament spool become part of a marble run? This model allows you to integrate an empty Prusament spool into a GraviTrax Junior marble run . The spool becomes a…
This set allows a marble to drop from a higher level and return to the track below . At the top, the marble enters a track stone with a central opening . From there it falls vertically through a stack of special height spacers with an…
This GraviTrax Junior Funnel lets the marble enter the funnel from three different directions . Inside the funnel, the marble circles several times before finally dropping through the center opening at the bottom . The funnel also works…
This model is a compatible hammer element for GraviTrax Junior . When the marble hits the hammer shaft , the hammer rotates around its axis. The hammer head swings back and strikes the marble from behind , transferring momentum and…
This model is a compatible track stone for GraviTrax Junior . It allows two marble paths to cross each other , making it easier to build compact and more complex marble run layouts. The element integrates seamlessly into GraviTrax Junior…
These models are compatible track stones for GraviTrax Junior . The track stones guide the marble in a straight direction and are also available with a 10 mm, 20 mm or 30 mm slope to smoothly lower the track level. The elements integrate…
This model is a compatible track stone for GraviTrax Junior . The track stone guides the marble through a 60° curve. The element integrates seamlessly into GraviTrax Junior marble runs and can be combined with original elements as well as…
These models are compatible track stones for GraviTrax Junior . The track stones guide the marble through a 120° curve and are also available with a 10 mm or 20 mm slope to smoothly lower the track level. The elements integrate seamlessly…
The idea of this model was to reduce the amount of material to a minimum. Tower height 140mm and 24 gramm of filament. Easy to print. No support structure needed. Sand clock design.
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
Gravitrax compatible Cannon. Based on the design of mechanic403: https://www.thingiverse.com/thing:4616717 Logo use is optional (can be hammered in to sit flush). Ring needs to be glued in place. Extra needed: 2 small aprox.10x2 (computer…
Alternative zum herkömmlichen Start. Hier können die kleinen einfach die Kugeln rein werfen und schon gehts los. Super schnell hintereinander. Damit ist richtig was los auf der Bahn. (am Besten ohne Hammer und ohne Wippe ;-)) Kann auch…
A finish slide for stacking balls in the end of track (project file with optimal supports and layer settings)
Start- or droppoint for your track. the model has 3 parts. Print the parts individually.
---- I modified the previous model to allow the ball to spin at high speeds with a larger diameter, while ensuring it remains stable and does not topple over even when it exceeds 20cm in size. previous model :…
These are simple inlet tiles for GraviTrax. Designed to have tiles with holes on top for dropping balls. 2-way tiles in 120, and 180 degrees, and 3-way tiles in 120-degree intervals are available. They come in two heights: 20mm and 25mm -…
This set is designed to create an easy-to-assemble zigzag course and get a good visibility of passing balls. The design has been simplified compared to the previous version, featuring a more visibility for passing balls and the use of…
This set is designed to create an easy-to-assemble zigzag course and get a good visibility of passing balls. The design has been simplified compared to the previous version, featuring a more streamlined look and the use of different…
These are tunnel tiles. - you can put other tiles on them. They come in two angles: 120 degrees and 180 degrees. Initially I designed for my zigzag models. I'm sure you'll want to use them for the bottom layer of zigzag.…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
My daughter wanted her Gravitrax tower that way, so we created this one. Hope you like it! You can print the tower with top on bed. Category: Construction Toys
My daughter wanted her Gravitrax tower that way, so we created this one. Hope you like it! You can print the tower with top on bed. Category: Toy & Game Accessories
put your marbles and plug some screw on the small hole. and when you ready just pull out the screw and the marble fall
2024/12/28 : I uploaded v1.1. I've tweaked the design slightly to lessen the overhangs, resulting in improving printability. Additionally, I've eased the fit at the top for a more snug but not too tight connection. ----- As I've been…
A simple 45mm spacer to fill balls to the Gravitrax Power starter from the top. Given its simple design, I'm quite sure no further instructions for usage or printing are needed. Note : I slightly reduced the size of the hexagonal hole on…
Grassy meadow tile for Gravitrax. I made this for fun. This design is likely to cause snagging - I recommend using tweezers to remove only the noticeable ones. When it comes to painting, I think it's important to apply a solid brown to…
All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…
GRAVITRAX: On-time switch to work with standard Gravitrax switch stone GRAVITRAX: All these features that you have to reset in time as they only work once Now you can bypass them with the “one-time switch” (Left or Right), allow yourself…
GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too, just print your own! GRAVITRAX Standard stone with triple small corners Print includes two parts: Column and Footplate;…
GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple small…
Here are tiles for Gravitrax to drop balls. I've made significant adjustments to ensure easy printing, a simple design, and optimal ball rotation visibility. I've included up to three inlets per tile, though most scenarios will only…
I designed this tile for Gravitrax as a ball collector. While aiming for a simple design, I focused on creating a tile that would allow balls to come to a gentle stop and could securely hold a certain number of balls. The basic design is…
A very simple Lego Duplo adapter for use with Gravitrax! It accommodates 2x2 (32mm×32mm) Duplo blocks. To remove the block, simply push it out from the bottom hole. The top is designed to be located 25mm above ground level. [Print…
A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…
I've just upgraded my 3D printer to Bambu A1, which can handle larger prints! Then, I've made a new design for even longer “Curved Rails” based on my previous ones. My previous “Curved Rails” :…
I've added additional Curved Rails not included in the first part. I've tested the "experimental" ones and can confirm they are functional. Curved Rails : https://www.printables.com/model/993843-curved-rails-for-gravitrax Longer Curved…
I've noticed that when I place a straight track directly after the GraviTrax Power Lever, the ball sometimes doesn't land on the track. I've increased the width of the rail and raised the ball catch position, resulting in a sloping…
I've found one of the most frustrating limitations of the genuine GraviTrax parts to be the lack of versatile connectors for sections with both elevation changes and angled turns. While custom-shaped rails offer some flexibility, in…
Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.
My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…
Gravitrax Finish track including Fusion 360 file. The one in our set broke so I made a new one. new Updated version with cleaned up geometry and slightly smaller nubs so its easier to connect. Print Settings Printer Brand: Prusa Printer:…
Here are four straight rails that can be used with Gravitrax, each spanning 1 to 4 tiles. The length is approximately equivalent to that of the original Gravitrax rails. Note : I'll be uploading separately some rails that are 1 to 3 mm…
Same model as https://www.printables.com/model/979865-gravitrax-junior-base-platefoundation/remixes, with less material
GRAVITRAX ; Cantilever GRAVITRAX Cantilever, hang those stones on the outside of your support columns Print includes two parts: Cantilever and Footplate; Footplate clicks in the bottom of the stone. Tested, fitted and used with my own…
GRAVITRAX ; UP (a.k.a. “The Light House”) Content below: Gravitrax; UP, General G-Code details Additional materials Assembly instruction Battery & Motor House Assembly instruction General Confirming Prints (other filaments) Suggestions &…
I've completely re-evaluated the ball's trajectory. As a result, the Drop Inlet's launch speed has apparently increased, but the Randomizer Inlet's launch speed has seen a more significant improvement! Previous ver. of Drop Hole Inlet :…
This is a longer version of the straight rails and they are compatible with Gravitrax. They are 420mm long and i printed them on my Anycubic Kobra 2 Max. If you don't have a large printer, check these extendable rails i made which you can…
I've included the 3MF file so you can see the settings I used to get the finish I was after.
Additional parts, you can never have enough vertical spacers, especially ones that allow you to route though them! Note that some of the designs require you to also print the base ring and glue that in to the part. Should all be self…
Hello. These are gravitrax height spacers based on original ones - grey and black = 1 height and half height. My design is built to be easy and quick to print with minimal material usage (more so if you also turn off top layers ans set…
GRAVITRAX ; Though you would like to be able to build a column on top of where you drop the ball through the plate? You also can use this drop in half-way up the column. GRAVITRAX; Height stone 25 mm with 14 mm diam. hole and roll in…
Hello again! This is a box or tray for storing all your gravitrax balls. the box comes in all different sizes like 4, 8, 16, 32, 64 and 128 so far. (More are coming). The print time for the biggest one is around 2 and a half hours. If…
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
Remixed from Thingiverse User thomasdr if you like my model please leave a like there
