Curved Rails for Gravitrax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 types of curved rails for Gravitrax
- Ocena
- 4,923 / 5
- Polubienia
- 190
- Pobrania
- 1503
- Wydruki
- 14
- Wyświetlenia
- 4449
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own.
I also made the simplest 120-degree short rail.
As a bit of fun, I also made a version that can use a ball as a weight.
When printed on my printer, the parts are adjusted to provide a slight resistance when inserted into the original Gravitrax tiles. Depending on the printing environment, the fit may be very tight or loose when inserted - in particular, if the rails move too easily, they will be practically unusable.
It is best to connect the two parts with the original Gravitrax tiles, with the height being flat or with a 0.5cm difference. If there is a 1cm difference, become difficult to handle (although it can be used).