Spiral Fall for Gravitrax - Simple ver.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spiral Fall models for Gravitrax. Available in 4 different heights.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 579
- Wydruki
- 2
- Wyświetlenia
- 1284
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(25/1/4) I removed models with larger elevation differences because the ball sometimes falling off the course. I apologize for the inconvenience.
---
I previously developed a Spiral Fall system capable of withstanding and adjusting for significant elevation differences.
https://www.printables.com/model/1014224-spiral-fall-for-gravitrax-v2-capable-of-handling-2
This is one of my favorite models, but the complex assembly and disassembly process made it inconvenient for flexible use.
Therefore, instead of a Spiral Fall model that required multiple parts to be assembled for adjustment, I’ve developed one that can be used with a single part.
I've adjusted the design to be slimmer than the v2 model.
I've created different Spiral Fall models with varying heights.
The height indicated in the file name for each Spiral Fall model excludes the 10mm base tile.
For example, a model named "60mm" actually has a total height of 70mm.
To keep the taller models stable, I've added a hole to insert a Gravitrax ball as a weight. This will help reduce shaking caused by the ball's centrifugal force. Please use this as needed.
[Print Setting]
Support : No
[Note]
If you paint the surface where the ball rolls thickly, the ball's speed will decrease, and the dynamic scenery will be lost.