1 / 2
Marble run Rails/Curves | Kugelbahn Schienen/Kurven (Gravitrax kompatibel) — zdjęcie 1
1 / 2

Marble run Rails/Curves | Kugelbahn Schienen/Kurven (Gravitrax kompatibel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WIP! A set of - Gravitrax compatible - rails, curves and slopes for murble runs.

Ocena
4,833 / 5
Polubienia
94
Pobrania
587
Wydruki
7
Wyświetlenia
2289
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Looking for straight extendable rails?

 

This set/work is still in progress. 

  • The connector is very tight to get a stable connection between tiles and rails
  • Most rails have walls to  work even with high-speed marbles
  • Easily printable - with no, or a minimum of support
  • There are
    • Straight rails 
    • Curved rails
    • Slope rails
    • … and combinations

Let me know if you miss any length/curve

 

Naming scheme:
 

<Length>_<Curve>_<Height>

Length: The amount of tiles to get from A-B
Curve: Angle in Degree (for slopes :  “+”: Curve to the right. “-”:Curve to the left)
Height: 10mm is the equivalent of a big height stone. Often slopes work for a range.

Example:
2T_-120D_5-15mm

A Curve to the left for 120° over 2 tiles. It is a slope that works best for a height difference between 5 and 15mm 

 

Printing:
I use Organic (Tree) Supports for slopes and the tiny bridge at the connectors

Note: 
I am in no way affiliated with Ravensburger or Gravitrax. All parts are my own creations and serve a purpose or function that the original parts can not. However, they are compatible with most Gravitrax components or alternative Gravitrax-like marble run models. I do this purely as a hobby with no intention of making a profit.

Tagi