1 / 3
Creality K1/K1 Max bed spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer to fix bed level problem
- Rating
- 4.857 / 5
- Likes
- 252
- Downloads
- 2,172
- Makes
- 7
- Views
- 15,385
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After so many attempt to fix the bed level i decided to create a small spacer to add between the mount and bed's support. The spacer is 0.20 mm but you will be able to change it in your slicer just working on the Z scale.
I use to had almost 1.2 mm of difference on the mesh, also with the bed level fix suggested by Creality.
This solution is quite easy.
Let me know if it works well in your case too.
Thanks
Print setting:
use 0.10 mm layer