Stabilizing spacer for MK4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer to stabilize MK4 against the enclosure roof
- Rating
- 3 / 5
- Likes
- 19
- Downloads
- 65
- Makes
- 2
- Views
- 909
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Inspired by the linked model, I found it too shaky when rotated enough for the distance of 15cm between the top of my printer and the enclosure roof. So I decided to create a static single piece measured precisely to fit. I also use it to hold the tube, until MMU3 comes out for MK4 :)
It stands on its own on the printer top but is meant to be pressed a little against the roof, using some flexible material - four 16x16mm pieces of cork, TPU,… about 4 mm in height, depending on the space left.
Note that with the lid extension (I have) if you use too much material, it will lift the lid - use less or put some weight (fillaments,…) on the top.