Stabilizing spacer for MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer to stabilize MK4 against the enclosure roof
- Ocena
- 3 / 5
- Polubienia
- 19
- Pobrania
- 65
- Wydruki
- 2
- Wyświetlenia
- 909
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Inspired by the linked model, I found it too shaky when rotated enough for the distance of 15cm between the top of my printer and the enclosure roof. So I decided to create a static single piece measured precisely to fit. I also use it to hold the tube, until MMU3 comes out for MK4 :)
It stands on its own on the printer top but is meant to be pressed a little against the roof, using some flexible material - four 16x16mm pieces of cork, TPU,… about 4 mm in height, depending on the space left.
Note that with the lid extension (I have) if you use too much material, it will lift the lid - use less or put some weight (fillaments,…) on the top.