1 / 3
Jessem Stainless Steel Dowel jig Spacer Bottom. — image 1
1 / 3

Jessem Stainless Steel Dowel jig Spacer Bottom.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spacer for the bottom part of the Jess Em stainless jig.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
178
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

1/4 " Jess Em Jig 

The stainless steel Jess Em doweling jig (thin) are good jigs.  In some situations, the jig is too thin to locate on a dowel to drill mating holes.  This spacer shims up the jig so you can locate on the dowel.  This shim will work when putting a  ¼" dowel centered in 1x material on the edge.  Then locating that pin in the side of another board.  This piece is used when you don't use the fence. It was designed to be used with 

https://www.printables.com/model/1202180-jessem-dowel-jig-top-spacer

 

 


 

I used ¼ x 20 x 1" hex bolts, the head has a press fit in the plate .   Then you can use wing nuts or knobs to hold it all together.

 

You can get the latest FreeCAD model here. 

https://gitlab.com/public_outlaws42/CAD_Files/freecad/-/tree/main/Tools/Dowel-Pin-Jig?ref_type=heads 

Tags