Jessem Stainless Steel Dowel jig Spacer Bottom.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for the bottom part of the Jess Em stainless jig.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
1/4 " Jess Em Jig
The stainless steel Jess Em doweling jig (thin) are good jigs. In some situations, the jig is too thin to locate on a dowel to drill mating holes. This spacer shims up the jig so you can locate on the dowel. This shim will work when putting a ¼" dowel centered in 1x material on the edge. Then locating that pin in the side of another board. This piece is used when you don't use the fence. It was designed to be used with
https://www.printables.com/model/1202180-jessem-dowel-jig-top-spacer

I used ¼ x 20 x 1" hex bolts, the head has a press fit in the plate . Then you can use wing nuts or knobs to hold it all together.
You can get the latest FreeCAD model here.
https://gitlab.com/public_outlaws42/CAD_Files/freecad/-/tree/main/Tools/Dowel-Pin-Jig?ref_type=heads