1266 modeli
I bought a Shimano Deore shifter (SL-M591) with an indicator display which I don't want. I still need something to prevent dirt & water ingress, so I made this. I removed the display, & while it has the tabs for holding the spare cover,…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Bodywork supplement washer shim for Carson CV-10. Printed in PLA at 0.2 Arandela suplemento carrocería VW Golf Rc Carson CV-10. Imprimido en PLA a 0.2.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
This multi-function workshop packer is designed as a compact, low-filament consumable for everyday workshop use. It combines several common tools into a single print, making it ideal for quick jobs, setup work, and using up the last part…
These are just simple blocks you can shove behind your Z axis motors on the bottom side to true up the angle with the metal uprights. See photos for what I'm talking about. I noticed mine were greater than 90 degrees and this seems to…
This will center your Shimano 105 / Ultegra and Durace 11 / 12 spd calipers perfectly to the rotor. Slides in from the top once pads are removed, make sure you have pushed in your pistons first (this is also a good time to lube and check…
UPDATE 2025-03-11: A little Disclamer In case that is not already obvious to you – do NOT try to use this tool with significant force or the layers will sheer off. It will not withstand significant force unless you print it our of metal…
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
2021 06 06: I added a rev 2 folder for the Inventor file & STLs. The improved version better supports the cleat in the rear. I use Shimano SM-SH56 cleats. Since changing out my cleat wedges to these 3 degree versions (rev 1), it certainly…
A set of 48 multifunctional shims with anti-slip surface (1mm excepted) in 8 different thicknesses and colors: 1-2-3-4-5-6-8-10mm, size 60x40mm. Note that the thickness accuracy depends on the calibration of your 3D printer. The box is…
Spacer block/plate/shim for systainer³ drawer rail m4 7mm Pro. The block makes it possible to use the same width cabinet that holds the Festool SYS-AZ drawer. It can be installed using the 32mm system. File includes a right and left…
Hello, i have greated a alignment tool for Shimano SPD Cleats. Its created in two different sections, you can print it also on small print plates. If you have some improvments for this feel free to contact me.
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After…
The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…
Hooray, I can finally mount my SRAM shifter on my Shimano brake! There are so many ways to fix problems by buying stuff. Here‘s my printed solution to a very common problem: the shifter won’t fit. I am quite sure, that any material other…
ReadMe.txt Unterlegstuecke (Parallelstuecke) 1 bis 10 mm Anwendung: Unterlegstücke mit 1 bis 10 mm Stärke. Dieses Sortiment ist eine Box incl. Deckel mit jeweils 3 Unterlegstücken je größe. Material: PLA Schichtdicke: 0,2mm Füllung: 25%…
This is a set of boxes with magnetic lids for the armies in the board game Neuroshima Hex. It should be fully compatible with Neuroshima Hex 3.0 and the 2020 Morloch Edition. There is a box for the standard armies (plus the special HQ…
This is for leveling your Blackstone griddle top with the smaller radius rubber feet on the 17" and 22" portable models. This is stepped in 1/8" increments. Also helpful to put on front feet to keep the grease rolling to the back. Print…
With numbers which makes them easier to identify, especially at night. I printed my set from PETG, 4 perimeters, 100% infill. Might need a bit post processing to touch up any PETG stringing and smoothen the numbers.
Vortex has discontinued their Zero Stop shims for the gen 1 PST series scopes. I needed a bit more space than what my original shims could do, so designed a set of additional shims I can use. Made a set of 5 thicknesses, from 0.2 to 1.0.…
There are several mounts for the Shimano BT-E8010 battery but they seem overcomplicated to me so I came up with this. The battery stays upside down and it's kept in place by it's own shape & gravity. Print settings Material: PETG…
This is a model of an extra shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns . After printing the bracket and mounting it on the back of the Core One I've noticed, that there's a significant space between the filter…
This is an X-axis belt shim for ELEGOO Neptune 2 series 3D printers. It makes the X belt parallel to the X axis (gantry) and equalizes the nozzle travel scale over the all position on the axis. Therefore, the accuracy of the printing is…
I really hate how Sovol provided no provision for properly sealing off or even attaching the bottom edge of an enclosure in the shape of the base. So… I made these up, to give a surface for attaching some foam tape, and to provide some…
My new CUES crank didn't come with a chainguard, this design fits just right. Feel free to adapt to more Cranksets, or let me know the hole spacing of the other CUES cranks! Designed around the cheap heatset inserts, files provided for M4…
A simple handheld holder for core shims. You simply slide the inner part into the outer part to pinch the core shim in place and allow you to manipulate the shim more easily.
Basic 3D model (OpenSCAD) for making typical pinion or caster angle correction shims for a leaf spring vehicle. User can specify width, length, thickness, angle, center hole size and also type of mounting. First photo is an example of a…
Snap on shim for aligning the Old Town seat to keep the seat out of the way of the dry storage lid. There are different sizes in case the tolerances require different. I used the .35" shim for my AP120 seat. Files are saved with thickness…
Ikea IVAR is great system that's very customizable. I just didn't like that in my system the top of my sliding door cabinet didn't line up with the shelves surrounding it. So, I made these shims and posts to insert on the underside of the…
Replacement part for the Fun Generation (and potentiall other) Microphone Stand that clamps to your desk. This is a replacement for the base of the stand, there is a very flimsy flexible plastic part which is terrible. this one isn't.…
My friend had a door that was too thin for the default range and the lock shank was bottoming out preventing a good fit. This is a *very* simple model to shim the door by 5mm. The rectangular cutout was actually trying to use less…
I had some closet doors that weren't staying shut. I tried bending the hinges to angle the door up, but they kept sagging back down and again wouldn't catch. So instead a sketched up a shim that fits between the strike plate and the door…
Quick model for a friend. Since the prototype shown here, I've tweaked a few tiny measurements. The print shown is for a left hand mount of the controller. Use the original hardware for installation (or replacement M4 parts). I printed on…
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
Hi, Upgraded stock extruder to E3D Titan (mirrored) Extruder with 0,9deg motor. Installation was little bit challenging, but got it there nicely. Shim plate is needed and you need to file small notch on edge of original holder. Print…
It’s important to print it in the same orientation as shown in the picture und completely solid, otherwise, it won’t hold up. Also, make sure to use a material other than PLA. I printed mine in ASA, though a stiffer material might work…
The Gustave arm design from SilverPanther3D is great except I wanted a different fit. The original model doesn't entirely close around the forearm, and the outer arm part doesn't sit flush against the main part (it's designed to float…
I wanted more adjustment room for the z axis wheels. I had added a nut above the springs and a silicon thermal transfer pad between glass & heat plate. These shims fit on the left & right sides & trigger the z limit switches a bit sooner,…
This print mounts to your Shimano EC-E6002 charger using two of the original housing screws. It provides a ring which can be used to lock the charger to a bike using a bike lock or chain enabling you to charge in public places without the…
Made for the racks that depend on holding the rack together with the rack mount equipment
This "come-along winch" from Menards has a two-to-one reduction pulley. The cable can jump the sheive and get jammed against the side wall. The spacers take up the excess space, keeping the cable on the sheive. I used PETG because it is…
Hey guys, complimentary to the shim posted by “NeedItMakeIt” here, I designed those shims to level the bed in it's back corners (those corners are hard to level using only the 3 leadscrews as adjustment). They are designed to be placed…
I really hate how Sovol provided no provision for properly sealing off or even attaching the bottom edge of an enclosure in the shape of the base. So… I made these up, to give a surface for attaching some foam tape, and to provide some…
I needed to lift up my linear rail slightly to use the NeedItMakeIt Y-axis Linear rails, so I designed this. It would be suitable for anyone who ever needs a shim for a MGN12 linear rail, for any purpose
Simple bracket for the Shimano Charger so it can be mounted on a wall. Made to fitt the EC-E6002 Charger Printed with 4 wall loops and 25% infill.…
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
Werkzeug, um den Bremsschlauch einer Hydraulikbremse zu halten, um den Pin einzuschlagen. --- Tool to hold the hose of a hydraulic break to insert the end pin.
This should be functionally the same as TL-PD400 tool. Outer sleeve tightens the 10 mm nut and inner tightens the 7 mm one. I have the PD-GR400. Haven't tested with others, but I'm guessing they use the same nuts. You put the smaller tool…
A chain guard for a Shimano Crank with four mount points. It fits my bike (Shimano TY-501), and I've included the openscad source if it needs editing for yours. Mine is printed in PETG, Black for the outside layers, clear when that ran…
2 models provided. The larger size provides a more gradual taper, making it easier to spread the calipers. Use this if you have sufficient clearance or the calipers are removed from the mount. The short model works for limited clearance.…
There are some designs out there trying to solve this problem. But i think that this is the most elegant solution. A way to lock your Shimano rear derailleur Cage. Permanently mounted to your rear derailleur while looking nice. It…
In the new GONG back wing / stabilizer system, you can adjust the back wing/stabilizer’s angle of attack using a shim. Here we have two shims: one for 0 degrees – which is needed if you want to ride without any adjusted angle of attack –…
As additional accessories for making you will need a threaded insert M4 and a bolt M4 x 80 mm This proposal has so far suited several types of "tears -shaped seatplays"
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
Soonish EV (https://soonishev.com/products/battery-post-relocator?_pos=1&_sid=6c0246f9c&_ss=r ) is selling aluminum battery adaptor posts so that a BT19BL-BS can be used to replace the oem rivian battery. I have made a cover and shim to…
I liked my older car that had gas cylinders to raise the engine-bay hood. The USA market Lexus UX has a rod you manually put in place instead. I purchased a ~$30 kit on Aliexpress similar to this one on Amazon which worked OK, except…
This is a two-part model to allow for prep sized columns to be held safely in a Shimadzu Column Oven
Not much to say about this really other than it was made to store my valve shims for my motorcycle. Category: Tool Holders & Boxes
Silent Hill F doll 25cm tall to print in one piece. Print settings below. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Muñeca de Silent Hill F a imprimir en una sola pieza.…
For this part, I'd recommend using a stiff material. I went with PC Blend, yet regular PLA should also be fine. Supports are needed for one section, but make sure you have overhang threshold set to 30° since that helps to avoid…
It's a part of my small directors monitor kit organization plan (you can see it on the last photo), but you can easily use it for a basic gridfinity setup because it uses a standart 42mm grid I have printed it with a 0.28mm layers for…
My Logitech C270 webcam works great, but covers the top of my screen on my thin bezel monitor, making it difficult to move between tabs or close windows when covered. This simple clip-on shim is designed to improve the fit of the Logitech…
Some Ionic-5s have an annoying rattle coming from the trunk lift gate making side-to-side movements while driving. Some dealers will help with this, but I decided to try with some simple shims after hearing how it is handled by the dealer…
Fishing reel knob for Shimano and Daiwa reels. Holes need to be cleaned with a 7mm and a 4,5mm drill if stringing is a problem, so the bearings fit well. Change first layer to 0.16mm for perfect surface.
Imported the Glock insert to Fusion360 and made 1mm shims inside to take up slack on Glock19 mag.
The CrazybeeG473 is Happymodel's latest AIO FC for whoops. It will NOT fit on the Fractal 75 frame because the VTX antenna hits the frame. You can install it with the JST port facing down, but it will hit the battery. I designed a simple…
10-inch Mini-Rack - Rail Shim - 1U I created this 3.5mm thick, 1U rail shim for a 10-inch mini-rack to allow mounting thinner steel blanking plates and brackets flush with thicker 3D-printed brackets and blank plates. Typically the metal…
A 3D printable crank bolt tool / key compatible with Shimano Hollowtech II systems , inspired by the TL-FC16 design. This tool is used to install and remove the plastic preload bolt on Shimano Hollowtech cranksets. It works perfectly as a…
With this part, you can adjust the bracket for an Ortlieb bike bag with Quicklock 3.1 so that it fits on luggage racks with thick struts. I created the model as a .step-file so that you can adjust the thickness to suit your needs.
We recently acquired some aquatic pets. I have been learning about consumer-grade aquariums. Apparently, a popular way to cover the top of an aquarium, to prevent things from falling in, is to use "egg crate" lighting panels. The plastic…
THE PROBLEM: OLD FRAME VS. NEW BRAKES I designed this part to replace the missing original cable guide on my 2013 Kona Satori. When upgrading to modern Shimano BR-MT420 4-piston brakes, I discovered that on almost all modern Shimano…
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
Screen shim to hold your screen to the DeftAudio Europi https://deftaudio.com/store/tproduct/939356662662-eurorack-fac Needs 4 m3x25 bolts and 4 (or 8) m3 washers and bolts. I assembled mine bolt through the face plate, nut, washer, shim,…
I have a Larson Storm Door that always dragged one corner when opening and closing. I made these shims to fix the problem. Printed in PETG and so far, they seem to be working great!
I made this simple Gridfinity Box with Metric Spacer/Gauge Box in 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm thickness. I colorcoded each Spacer and also labeled them with white numbers. Each Spacer also has the corresponding radius on…
Tired of a rocking TV tray? Use the shims to even out the legs and stop the rocking. 4 sizes available (1mm, 1.5mm, 2.0mm, 2.5mm). Fits TV Trays with 20 mm x 25 mm leg sizes. Thin enough to still fit when the tray is closed. Print in TPU…
Print at 100% fill rate with a 0.08mm layer height. The base layer will be 0.16mm. Swap Procedure: Initial filament: Black Switch to next filament: Gray at layer #10 (0.88mm) Switch to next filament: White at layer #15 (1.28mm) (use until…
There are several issues I've encountered with direct to body pickup mounting. The route is rarely the correct depth, if there is a neck angle the route may not match it, and the size of the wood screw needed. I have taken to solving the…
Tool designed to assist disassembling furniture without damaging the wood. The taper tip should break or bend before damaging wood. Gently tap the taper into the parts you plan to separate, use as many as needed to gently separate parts.…
Series of different thickness of shims that I used used to level 1"x dimensional lumber with 1"x furring strip lumber during model train benchwork assembly, but can be used wherever a flat shim is needed. Category: Other
Made for the racks that depend on holding the rack together with the rack mount equipment
This is a simple modification of the existing MGN12 alignment tool that makes it a shim on the X rail. When setting up my Tapchanger, I wanted to use sensorless homing, but the shuttle by itself touches the X axis at a different location…
Per "sbloccare" i pistoni "pigri" delle pinze Shimano a 4 pistoni (tutte). Due versioni disponibili: per i due pistoni di uno stesso lato; per un singolo pistone.
🇯🇵 京都へようこそ! ⛩ Welcome to Kyoto! This model represents the famous thousands of vermilion torii gates, which straddle a network of trails behind the main buildings of the Fushimi Inari Taisha (伏見稲荷大社) an important Shinto shrine in southern…
Part of the Street Fighter II Classic Collection. This version features the retro pixel-art aesthetic designed to be printed flat, making it perfect for a diorama figure, a keychain, or a fridge magnet. PRINT FILES INCLUDED File 1 (Color…
I have horizontal sliding windows that have, over the years stopped latching at the top because the middle has sagged. Some similar windows have adjustment screws to increase or decrease the height of the rollers on the bottom of the…
I use those for reverse engineering the can bus protocol between the battery and the rest of the system (motor, screen, charger, ...) You can check the progress here:…
Designed from the shape of the spacer that came with my bicycle. And using an existing model as inspiration for some details. Standard solid 0.2 layer, PLA or PETG print. Designed with tearable dots for better adhesion to the printing…
This axle cap is modeled off the right side axle cap, with clearance for the centerlock rotor mount. The fit is snug to the bearings, and shouldn't have any drag on the rotor mount. Printed in PETG, 0.2mm Layer Height w/ 6 perimeters.…
Add a touch of modern sophistication and crystal-clear organization to your kitchen or garden with our unique, 3D Printed Copper Shimmer Herb Markers. Precision-crafted with advanced 3D printing technology, this set of 12 markers features…
Hello World! I'd like to thank cheeky_b52 and tkeyser for the idea of this. I made this in (dried) TPU with FullSpectrum-Orca off a Snapmaker u1. This would work as a 2 color print as well. The .3MF file has the "objects" arranged in…
This bleed block is a precision tool designed for road bike hydraulic disc brakes. It is an essential accessory for routine maintenance, such as bleeding lines or replacing hydraulic fluid. It ensures that the pistons remain properly…
HEY i was tired of small rocks going between my motor and frame with the possibility of damaging the motor and also having them rattle drove me insane so made this that solved it and also no heatsoak problems printed in TPU also the rear…
This is an alternative trigger shifter lever for a Frog 48 bike. It seems the trigger is a Shimano Alivio. Installation: Remove old lever. I used a knife. Attach the new lever to the metal lever through the hole with a cable tie.…
![Ikea IVAR Cabinet with Sliding Doors Shims [Fixes Height Mismatch]](https://media.printables.com/media/prints/119234/images/1158942_50f82914-4b28-4433-aba3-60233d2d794a/img_3385.jpg)
