Shim for Direct To Body Pickup Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shim adjust able for neck angle to aid direct to body pickup mounting
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are several issues I've encountered with direct to body pickup mounting. The route is rarely the correct depth, if there is a neck angle the route may not match it, and the size of the wood screw needed.
I have taken to solving the screw issue by using an M2 threaded insert pressed into the body and then capillary glued in place with thin superglue. An M2 countersink machine screw seems small enough to pass through the pick mounting holes with out the need to drill them out.
The file attached is an openSCAD script to allow you to generate a shim of customisable height and size, it also allows you adjust the angle of the top face to match the neck back angle (this is why countersink screws are used).
Pickup model in the images is this one https://grabcad.com/library/wilkinsons-humbucker-iii-series-electric-guitar-pickup-1
You will need to download OpenScad to use this file as intended, adjust the variables values to suit your own needs.