1 / 2
A shim for Prusa Advanced Filtration - Core One Retrofit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 88
- Wydruki
- 5
- Wyświetlenia
- 1010
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (0)Kolekcje (58)Powiązane
This is a model of an extra shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns. After printing the bracket and mounting it on the back of the Core One I've noticed, that there's a significant space between the filter and the printer's back wall (about 3 to 3,5 mm).
So I've created a matching shim, that can be put between the printer and the bracket and it presses the filter firmly to the bracket and creates a better seal so the air is only being sucked from the inside of the printer.
