Wyniki wyszukiwania: retrofit

9007 Headlight LED retrofit ring - 2 pieces (also for 9004, 9005, etc)

Made this to fit a 1999 Fleetwood American Tradition motorhome but it should work for any other application. You just need 2 screws to clamp the 2 pieces together.

Retrofit Label Holder for Unlockable Loose Filament Sample Spool

This version of the label holder can be glued to the side of an already printed " Unlockable Loose Filament Spool ". It takes the same labels as the version with integrated label holder (look there for label size details). Print with…

AERECO ALD ZUROH 100 MD retrofit lever for manual open/close

Retrofit for the AERECO ZUROH 100 MD moisture-controlled external air vent or as spare part for the ZUROH 110 MD with lever. The lever in combination with drilling a hole into the cover converts the ZUROH 100 MD to the ZUROH 110 MD and…

Bluetooth Amplifier Retrofit Plate for 2.1 Subwoofer Speakers

Many desktop 2.1 speaker systems place the amplifier electronics inside the subwoofer enclosure , which then distributes amplified signals to the satellite speakers, like the Trust Tytan subwofer shown in the photos. When the amplifier…

Teeny Tote Retrofit Parts

The original https://www.printables.com/model/1484702-updated-lid-lowes-mini-box-teeny-tote-with-origina is awesome! Add bin dividers, and a handle to make it easier to pull out of the rack. My complete tote bin is here:…

Minted: BoboVR M2 to M3 - Quest 3 - Printable retrofit

I remixed a remix Changes from original - Hole moved to middle (More wiggle room can bring closer to face) - Hole raised up closer to the edge (Left and right side are now provided). Increases distance between Q3 arm and the BOBO band -…

Consular Class Cruiser - Retrofit

Consular Class Cruiser - C70 Retrofit version, designed in Fusion 360.

Air Compressor Filter Housing Silencer retrofit replacement 1/2 npt

This replaces the 4 inch diameter filter housings that come on some Campbell Hausfeld and other brands of air compressor pump. You will reuse the existing ½ npt metal fittings, but will remove the long stud and replace it with a short M6…

The axp90 heatsink is retrofitted with a 4090FE fan

Print settings:1 Use PETG or ABS 2% 15% filling Object 3 0.2mm layer height If you enjoy appreciating it, please support and follow me The use of this model for commercial and other profit-making activities is prohibited and violators…

Tango 2 Antenna Crossfire TX V1 Retrofit

I was annoyed having to remove the T-Antenna every time packing my radio up in my bag. So I retrofitted the Tango 2 antenna to my Crossfire TX. This is now more compact. Rotates like on the Tango 2. Test fitted on my Tango 1. The antenna…

CR-10 SE Quiet Fan Mod - 5015 Blower Fan Retrofit Adapter

Replace the loud stock fan with a much quieter 5015 blower fan held in with this bracket, fitting neatly in the existing CR-10 SE shroud. *Soldering is required, rotary cutting tool recommended to trim the fan How to: Buy a 24v 5015…

Poop Chute Retrofit Template For Creality K1 Series

This cutting and drilling template allows you to retrofit any Creality K2 Series poop chutes to the K1 series for use with the CFS multi filament system Things you might need Original CFS (without the extras) 3mm drill bit (round shank)…

Audi A3/S3 8v Retrofit mib1 to mib2 carplay usb port

OLD port AMI New adapter 5Q0035726E -…

Prusa Advanced Filtration - Core One Retrofit

If you already have the Advanced Filtration System for the Original Enclosure or have the Alveo3d Hepa Filter with the blower, you can now install it to the Prusa Core One. Please note that while there is a fan header on the Core One…

Flashforge Adventurer 5M (AD5M) - Retrofit Minimal Enclosure onto OG DIY Enclosure - get your touch screen back on metal frame v1.0

Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…

Plug for Porsche 987 Bose Subwoofer Retrofit

Part uses available pins and plugs into the Bose 987 rear amplified subwoofer. I printed with ABS solid with no infill. No Supports. For whatever reason I had to turn the plastic flow down a little from my normal to have the hole sizes…

LED Mount Nubs (and spacer jig) to retrofit the earlier minimal enclosure riser

This pertains to the "Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more" — https://www.printables.com/model/1130485-flashforge-adventurer-5m-ad5m-minimal-diy-enclosur This is a set of nubs…

Poly Clone Hero Arduino Pro Micro mount retrofit

just a simple plate mount that can be glued in between the bottom frame rails of the guitar body. i use and recommend a USB-C variant of the pro-micro because the tight space for the cable to plug in and out of the body can be a bit rough…

IBM Selectric I retrofit ribbon spool.

I invariably ordered the wrong spool for my model of selectric, leaving me with a takeup spool that wouldn't even sit on the carriage. So I designed a similar empty spool that would work with the arbor of the selectric's other side. This…

Commodore CBM PET 8032-SK hood stand retrofit (screwless)

The 8032-SK model of the classic Commodore CBM PET lineup does not feature the iconic “hood stand” that holds the case open for easy access. With these parts, you can retrofit a similar stand that securely holds the case open between the…

Dust Port Retrofit for Skilsaw Classic Circular Saw

Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s This great circular saw has only one weakness: no dust collection port. Today we fix that. Prints with no supports needed. If you print with 0.3 layer height and…

Anti-rotate for LED retrofit

LED retrofit tubes of the single-pin type can rotate in the fixture. This print friction fits over one end of the tube to prevent rotation. Example is a LED T8 retrofit into a T12 8' tube fixture. May need adjustment for your specific…

Cupra Born Magsafe retrofit

Print face down with normal supports, I used PETG but ABS/ASA would be better for hotter climates. Should work with any iPhone model as I have tested with a 15 Pro Max, camera bump isnt an issue either with the charging pad being raised.…

A shim for Prusa Advanced Filtration - Core One Retrofit

This is a model of an extra shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns . After printing the bracket and mounting it on the back of the Core One I've noticed, that there's a significant space between the filter…

Volvo S60 S70 R Projector Retrofit Main Beam Tapered Washer

For Morimoto D2S 5.0 projectors on your S60 R or V70 R, you can use this washer to aim the headlights higher and it also locks them in place rotationally. You would remove the silicone washer on the front side, then have this washer, the…

Volvo S60 S70 R Projector Retrofit Secondary Beam Tapered Washer

For Aliexpress type projectors on your S60 R or V70 R, you can use this washer to aim the headlights higher and lock them in rotationally. The puzzle piece cutout lets you open a gap to slide it over the wires in case they are hard wired…

Flashforge Adventurer 5M Retrofit Minimal Enclosure with Everything else

Note: I have added the Flashforge parts. https://www.printables.com/model/1220294-flashforge-adventurer-5m-ad5m-retrofit-minimal-enc

9007 Headlight LED retrofit ring - 2 pieces (also for 9004, 9005, etc)

Made this to fit a 1999 Fleetwood American Tradition motorhome but it should work for any other application. You just need 2 screws to clamp the 2 pieces together.

Prusa Advanced Filtration - Core One Retrofit by EvoDesigns - Mounting changes

I really like the original design intent but I wanted it to be more easily removable so I slotted the mounting holes so it can just be lifted off and added magnets to secure it. I prefer the look of hexagon holes so I revised the exhaust…

Nintendo Switch Front panel retrofit with joycon rails

Switch dock retrofit with joycon rails. you can print the whole retrofit or just the raisl and glue them on. Category: Video Games

Alfa Romeo Wiper Switch Retrofit (5-terminal)

For those hoping to avoid spending a lot of money (relatively) to fix a broken 5-terminal wiper switch (not sure which years have it, my car is a '74 2000 but it's been through some rewiring even before I got it). Please see the AlfaBB…

Elegoo Centauri Carbon- Extruder and Bambu Lab style hotend retrofit

SEE NEWER VERSION HERE Fully tested! This extruder replaces the stock centauri carbon extruder and allows use of a Bambu Lab clone hotends with swappable nozzles (commonly sold as TZ, TZ2.0, TZ3.0 etc). You will need to use a melt zone…

Audi A3 8V Golf 7 USB Port Retrofit for Carplay / Android Auto

This model is basically a clone of "81A035736" and it allows you to have Carplay and android auto while saving €200+ by adapting a €35 usb port from the Volkswagen Golf 7 ( 5Q0 035 726 E ) to your Audi A3 8V (2012-2020) Just take the the…

Pajero Inclinometer Retrofit

This is a simple 3D-printed adapter that allows you to fit an inclinometer module—salvaged from a generic aftermarket gauge—into the factory Pajero/Montero gauge cluster, while clinging to the retro analogue look. The module I used is…

Design8Studio Retrofit Riser Kickstand

NOTE: This kickstand was designed for the Retrofit Minimal Enclosure by Design8Studio . I highly recommend you check out their other AD5M Mods as well. This is a short ~16 minute print for a removable kickstand to hold open the top of the…

DIY Projector Screen Motorization Retrofit Kit (Rollerhouse)

This mount is designed to replace the existing fixed-end (crank side recommended) bracket of your projector screen. It houses a 12V Rollerhouse roller shade motor, which slides directly to the screen's tube. The other side of the screen…

Mount for BCN D25/W27/W50 Raspberry Pi 3B+ (Klipper Retrofit)

This is an adapter to mount a Raspberry Pi 3B+ (or any RPI with the same mounting pattern) in a BCN D25, W27, or W50 printer (It might also work on an R19 Sigma or Sigmax, but I haven't checked yet). The mount and Pi replace the original…

Retrofit Label Holder for Unlockable Loose Filament Sample Spool

This version of the label holder can be glued to the side of an already printed " Unlockable Loose Filament Spool ". It takes the same labels as the version with integrated label holder (look there for label size details). Print with…

Desiccant Lid Retrofit Remix for Bambu AMS 2 Pro

I printed with a 0.6mm nozzle and 0.24mm layers, but that shouldn't matter much or at all. Recommend PETG or ABS/ASA for longevity if using the AMS 2 heating function.

Shim for Prusa Advanced Filtration - Core One L Retrofit

The shim for the Core One AFS (from yaworski ) dosn't fit at my new CoreOneL - I don't know why, but the holes in the shim were on the wrong place fore the CoreOne L I added some bigger holes at the place where ist the fan mounting at the…

Core One Advanced Filtration Retrofit Housing

You will need two M4 heat set inserts to install fan. Four 3mm x 10mm screws to mount the housing to the back of the printer.

Ryobi Flashlight LED Retrofit

Another just because I could project. I converted an old 18v flashlight to an LED for lumen overkill with active cooling. The model used for the conversion was a FL1800 but it should be identical to the more common P700. Hardware Used:…

O-ring for Core One Advanced Filtration Retrofit

This is a 3.5 inch x 2.5 mm O-ring for the DIY / retrofit advanced filtration. It can be easily printed solid in TPU with the flat side facing down. To install, make sure that the flat side doesn't face the blower fan. Then just proceed…

Ender 3 V3 SE - Creality Light Bar (Retrofit) With Bowden Hole

Webguyatwork did a great design job on the models for the light bar. I just added a hole for a Bowden tube.

Retrofit parts for vintage Dytek Line Master LM204 Vise

I needed to bring this old 50s-era American-made vise back to life instead of throwing it out with new soft jaws, a new knob for the turning crank, and new feet. Hopefully these parts help someone else someday ! Jaws provided in a variety…

Poly Clone Hero Raspberry Pi Pico mount retrofit

So I decided to try and make Poly Clone Hero Controller by Josh Designs as it seemed a cool little project. But I realized after printing my parts that the original model doesn't fit a Pi Pico which I intended to use as the brains of the…

AERECO ALD ZUROH 100 MD retrofit lever for manual open/close

Retrofit for the AERECO ZUROH 100 MD moisture-controlled external air vent or as spare part for the ZUROH 110 MD with lever. The lever in combination with drilling a hole into the cover converts the ZUROH 100 MD to the ZUROH 110 MD and…

Bluetooth Amplifier Retrofit Plate for 2.1 Subwoofer Speakers

Many desktop 2.1 speaker systems place the amplifier electronics inside the subwoofer enclosure , which then distributes amplified signals to the satellite speakers, like the Trust Tytan subwofer shown in the photos. When the amplifier…

Recycling retrofit rings: separate your garbage into trash and recycling

One of the most annoying parts about recycling is figuring out where to put it. Many homes have a single in-cabinet trash can, leaving you with no easy way to separate the recycling without cluttering your kitchen. These dual rings are…

Rack Mount for Unifi PoE Over 2-Wire Retrofit Extender (UACC-Retrofit-PoE-2Wire)

Rack mount with 7 bays for Ubiquiti Unifi PoE Over 2-Wire Retrofit Extender (UACC-Retrofit-PoE-2Wire) 4 screws needed for back plate

Adaptive Control Arm Assembly XYZ21-3 (Additively Manufactured Retrofit Variant)

The XYZ21-3 Control Arm Assembly is a precision-engineered, additively manufactured structural component designed for integration into a quadcopter flight system as a retrofitted load-bearing interface. Fabricated via fused deposition…

Speedybee Mario 5 O4 Pro Retrofit Jig

If you’ve got an older SpeedyBee Mario 5 frame and want to mount the DJI O4 Pro, you can make the necessary holes easily with this jig. The newer revision of the Mario 5 added a few extra holes to support O4 Pro mounting. Since the CNC…

Teeny Tote Retrofit Parts

The original https://www.printables.com/model/1484702-updated-lid-lowes-mini-box-teeny-tote-with-origina is awesome! Add bin dividers, and a handle to make it easier to pull out of the rack. My complete tote bin is here:…

Golf 4 Power Folding Mirrors retrofit microswitch bracket

Audi 8P Puddle Light Stencil for Retrofit

I retrofitted puddle lamps on my A3 8P and being a stickler for detail, wanted the opening to match the OEM pattern so I created this stencil. Put it over the puddle lamp depression and use a sharpie to trace an outline. Drill and sand…

Scooter Handle Turn Signal Retrofit - Button Protector

Recently retrofitted your scooter with turn-indicator handle bars? (Now mandated by Austrian law) Stored your scooter overhead in the train? Brightly flashed your indicator light when the button at the end of the handle bar accidentially…

Sparrow Solutions - Zortrax Klipper retrofit toolhead

The end result of a long winded project attempting to convert a zortrax m200 & m300 to Klipper, to run common hardware (Ender 3 hot end ect), you will need to supply and fit your own extruder drive, as attempts to print one went poorly…

Unifi UA-Retrofit-Reader wall mount

Surface mount box for the unifi UA retrofit-reader. Attach the surface mount box to the wall, then the included metal plate to the box with 4 small screws. The reader plate doesn't let it sit flat to the box, so I used some silicone to…

Unifi RetroFit Reader Wall mount

This is designed for use with the Unifi Retrofit Reader (UA-Retrofit-Reader-B). It has two screw holes for you to mount it on the wall using self tapping screws about 3 inches apart. All screw holes are spaced out and ready for the screws…

Retrofit Nub Mounts for design8studio's Minimal Enclosure v3.0 & AD5M LED Light Bar Strip Kit

I wanted to relocate the FlashForge LED strip kit from the front, to the right side of the case in order to prevent the PTFE tube rubbing against the sharp-cornered LEDs. I recommend a good gel CA glue to mount these to the right risers.…

Nintendo Switch Dock Front Panel Retrofit

Customized the screw holes to be 1.6mm since the original was too small and the remix was too large Remixed from: Nintendo Switch Dock Front Panel Retrofit by amazingyen Nintendo Switch Dock Remastered Remix by AbandonedPlayer Print…

Ultimaker 2 SKR 1.4 Raspberry Pi retrofit case without drilling

Marlin 2.x is not running well anymore on old MEGA2560 boards, so I decided to get my UM2 up and running again with new hardware. This case is made to use the bores of the spool holder in the back so you don't have to drill anything in…

Larger HDD case for retrofitting LaCie Rugged Thunderbolt 2 interface with 5TB HDD - NO SUPPORTS NEEDED

I have and use two nice, older MacBook Pro laptops (Retina, mid-2015) that have older, slower USB ports, yet have Thunderbolt 2 ports (which are still decent, speed wise, to this day). I had a LaCie Rugged portable HDD with a Thunderbolt…

RAPT Controller Retrofit

This design was used to convert my old Brewpi fermentation chambers into RAPT compatible fermentation chambers. I use the 2m temp probe extension from kegland and a 1a led driver to power the unit. You will need : 4 M3 square nuts 4 M3x10…

Retrofitted motor mount for blinds automation

This is designed to hold a 28BYJ stepper motor in place to rotate the worm gear driver found in most household blinds. There are other projects which mount a motor in a 2" track and drive the rod directly. My blinds are a 1" track and…

LACK enclosure MMU retrofit and ventilation parts

Some remixed parts that came in handy when adding another table for additional headroom in my lack enclosure, as well as some parts for a DIY ventilation system based on a salvaged 90mm 12V fan from an old PC power supply. Category: 3D…

Quickmill 02835 - external mount for retrofitted manometer

This part is more of a temporary solution for myself and is meant more as an inspiration for an improved design. Installation is as follows: install manometer with the fixed capillary tube inside the machine route the capillary tube to…

Top Cover Retrofit Splashguard for "3D Face shield - A4 binding sheet - easy punching" by Maciej I

Hi! These model files allow you to retrofit a Top Cover to „Face shield – A4 binding sheet – easy punching rc2_3" (by Maciej I). Also there is a file with increased wearer comfort . It has little tabs where you may fit a paper tissue. A4…

Cube Pro Retrofit with Bondtech BMG-M

The Cube Pro can be a great printer if you swap out the proprietary bits and and upgrade the extruder and hot end. Modification notes can be found in the Cherokee Makerspace Wiki .

Heated bed Cable pinch prevention retrofit clip for AO-10x series printers, Mendelmax, and possibly the TAZ

This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your heated bed cable up enough to eliminate the risk of pinching it at full Y extension. It should slide onto the heated bed…

Taz 4 X belt retrofit bolt on tensioner

This is a belt tensioner that will fit the standard Taz 4 X Carriage frame. This should also fit the 3.2 and the 2 frame. not sure about the Taz 1. It's a simple screw based tensioner. I was only able to fit it in the inverted position,…

Retrofit Nozzle wiper for mounting a Lulzbot Mini style bed wiper to a Taz or other printer

This is just a bracket to mount a Lulzbot mini style nozzle wiper (which you can download from here: http://download.lulzbot.com/Mini/1.01/production\_parts/printed\_parts/wiper\_mount\_Mini/ You will need two m3 heat set inserts, a pair…

Retrofit Micrometer Endstop Target for Taz 4/5

A Mitutoyo 148-507 micrometer head will reportedly fit this one. I haven't personally tried it, but the person who tried it in my openbuilds Z axis mod (which uses identical micrometer support says that it will work fine) 1-21-2015 -…

Unbreakable Prusa Z-rod stabilizer constraint (push on, retrofittable, with ring)

I like mikpcw's retrofittable z-rod stabilizer very much, but I want the ball bearings to sit on a ring, not on nubs. Small Patch via SCAD, nothing really exciting. stabilizer.stl is the one-off version Category: 3D Printer Parts

SnapMaker J1 Front Load Spool Retrofit

This retrofit converts a Snapmaker J1 from rear-mounted filament to a front-loading spool system. The two filament holders utilize the empty space inside the printer to the left and right of the bed and can be loaded from the front which…

BMW E30 - Headlight aim switch bracket (retrofit electrical system)

It's possible to use the electrical motors and switch from a Ford Fiesta to retrofit these onto the BMW E30 headlights. Removing the hydraulic actuated headlight aim adjusters which tend to leak after all these years. The bracket makes it…

Yarn Baller Retrofit

Required Materials: https://www.michaels.com/product/loops-threads-yarn-winder-10322830 https://a.co/d/15jvrSB https://a.co/d/dZK3izF style 2 https://a.co/d/5xp7mbh 12v 60 RPM 6x M3x6 Bolts 4x M3x4 Bolts Spare wire for low voltage Cable…

VASE MODE: Cherry Blossom Lamp Plastic Liner retrofit

Maybe you've got the same lamp / lampshade I do and its plastic support liner has crumbled or began to decay and you want to make it look like new? Look no longer, here's the lamp shade liner for you - and a perfect fit, no glue required!…

Parts for modifying FLA mirror for retrofitting Lane Assist

Whats you need? Mirror for FLA part.n. 5K0.857.511.B Assistent camera 3Q0.980.654 The Best choice it's index H 34 Pin 0.5mm Pitch FPC Cable Extension Max length for works without a problem is 20 cm…

Ender 3 S1 Pro retrofit centering spool holder

UPDATE: I replaced the lock nut stl with the correct one. Thanks for letting me know. This centering roller fits directly on the OEM roller on my Ender 3 S1 Pro. No bearings, bolts, etc. I suggest printing the halves vertically as that…

Snapmaker J1 HEPA/Charcoal filter retrofit

By utilizing the two bracket holes at the back of the J1 Printer - one can create a dual-filtered exhaust using off-the-shelf HEPA/Charcoal filters. Additionally, by removing one filter, adding a rear duct, and turning one fan off one can…

Locknut for retrofit centering spool holder

I just cut off the top to the retrofit_nut to make a locknut to fit. The original retrofit_locknut is wayyy too big.

Fiat Stilo Connect nav raspberry pi retrofit

Installed a raspberry pi into the original connect nav of a Fiat stilo.

Pastamatic - retrofit for better target spindle retention

Untested work in progress

v0.2 retrofit Filament Runout Sensor 1/8" PushFit

I have just fitted a PushFit coupling instead of the ECAS04 collets…

Aereco Variable Retrofit Kit for ZFH 5-35 to ZFHV 5-35

Use as retrofit kit for the Aereco ZFH 5-35 moisture-controlled external air vent or as spare parts for the ZFHV 5-35 with lever. The pin and shutter lever converts the ZFH 5-35 to the ZFHV 5-35 and allows for a manual override of the air…

Honeycomb retrofit inserts for Ikea skadis dropper bottle holders

Designed to make the skadis dropper bottle holder by “TheRooster” retrofitted to the honeycomb storage system. These just press in to the original model's holes instead of the original skadis hook design. They should fit tightly. I used…

Ender 3 V3 SE - Creality Light Bar (Retrofit)

NOTE: My Thingiverse imports duplicated this entry with updates. Go here ( https://www.printables.com/model/590337-ender-3-v3-creality-light-bar-retrofit ) for the more updated models for both the V2 and S1 light bars. This set of…

Ender 3 V3 SE - Creality Light Bar (Retrofit)

This set of brackets allows mounting the official Creality Light Bar kit to your Ender 3 V3 SE printer (tested here on my SE version). Find this item on Amazon for as cheap as $20. The frame of this printer is much lighter than the V2 and…

BoboVR M2 to M3 - Quest 3 - Printable conversion (retrofit) kit - Remix

First of all i want to thank the original creator for an awesome design its way better than using the generic adapters. So i noticed i was having problems when i have the face plate in the smallest position. I had to slide it all the way…

BoboVR Quest 3 M1 Retrofit

As I wanted a cleaner alternative to the other Q2 to Q3 Adapters I remixed this Adapter to Fit BoboVR M1/M2 Headtstrap for Quest 3 like the Original BoboVR M1 Retrofit Kit for Quest 2. Printed in PLA 0.2 Layer 100% Infill Printed on Flat…

Minted: BoboVR M2 to M3 - Quest 3 - Printable retrofit

I remixed a remix Changes from original - Hole moved to middle (More wiggle room can bring closer to face) - Hole raised up closer to the edge (Left and right side are now provided). Increases distance between Q3 arm and the BOBO band -…

Bobovr retrofit M2 to M3 Mod

After trying a few different prints, the one from https://www.printables.com/model/615431-bobovr-m2-to-meta-quest-3-mod/files was the best snug fit, others loosened with time. However, the round insert snapped on this both of my prints…

Audi A6 C7 RHD chilled glovebox retrofit flange

I retrofitted a glovebox cooler to my Audi. The glovebox outlet and pipe were easy to obtain, but there wasn't any way to connect the pipe to the air con box, so I made one. This flange slots onto the end of the pipe, then you will need…

Bento Mini Cradle No Nuts Retrofit Edition For Voron 0

What and Why: I was looking for a filter solution for my Voron 0.2 and stumbled across the Bento Mini. I have an enclosed Bambu Labs P1P using @thrutheframe 's Arc enclosure and also use the larger Bento Box in that machine. I wanted to…

BTT TMC5160T Plus Mount for VzBot (Retrofit)

This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add…

Volvo S60 V70 R P2 RTI Retrofit

I retrofitted a GARMIN navigation into my Volvo S60R from 2003. Downloads: baseplate for your own navigation project baseplate for GARMIN Drive 5 Plus My thread on swedespeed:…

HevORT ZR 2.6 Reduction gearing (Retrofit) with triple bearings

A 2:1 gear reduction designed to bolt in place of a Nema 17 motor. It is specifically remixed for the HevORT ZR 2.6 Z-axis from the original design by iZOOM. It can be retrofitted without dismantling the bed, ball screws, mounts, etc.,…

MPCNC endcap conduit bushing for cable protection (F-25mm, retrofittable)

Simple endcap for the 25mm MPCNC version. Can be retrofitted due to it being open. Has a larger diameter and requires some squeezing to get into the tubing but will therefore hold tightly. The corners are also rounded to protect the…

Trotec laser retrofit with 40W CO2 tube

I have an old Trotec laser engraver. It was built in 1998 and worked quite well until this summer 2023. So I would say that it was a very reliable machine but it now suffers from its old age: laser tube is dead software is very very old…