BTT TMC5160T Plus Mount for VzBot (Retrofit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Super 8 Mount in place of the Melllow TMC5160 drivers.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 1594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add spacers or scale z the adapter if you need to lift the mount higher for clearance.
Print settings:
No support needed, rotate the model with the large face on the bed. Use preferably a 0.4 nozzle on the adapter as the walls around the recessed holes are thin. Layer thickness 0.25. Use ABS or PETG for some heat resistance in the electronics bay. The mount has standoffs for the TMC5160T Plus drivers to create an air gap under the drivers.
Installation:
- Chase holes/m3 threads
- Screw the adapter onto the Super 8 mount (10x m3x30 screw, check length if you scale)
- Screw the TMC5160T Plus drivers to the new mount (16x m3x6)
- Screw the new mount to the adapter (5x m3x10)
The space under the adapter can be used to route wiring coming from the mainboard.
Optionally you can install 30 mm fans onto the drivers or use 40 mm fans and the fan adapters by IMP_FM: https://www.thingiverse.com/thing:4795229
Fans plug directly into the drivers, 24v!
EDIT: a DIN mounted version is now also included which uses the VzBot DIN clamps. Both horizontal and vertical installation is possible for V2 of the mount.