Bobovr retrofit M2 to M3 Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modded BoboVr M2 to M3 retrofit parts
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 1055
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
After trying a few different prints, the one from https://www.printables.com/model/615431-bobovr-m2-to-meta-quest-3-mod/files was the best snug fit, others loosened with time. However, the round insert snapped on this both of my prints while trying to install. And reprinting them and having to print support was time consuming so I modded it to print into two pieces with the insert like the print for https://www.printables.com/model/610999-bobovr-m2-to-m3-quest-3-printable-conversion-kit and just took the insert piece.
Not sure if if it's too thin, may increase thickness if the sandwiched layer is too thin.
Note, to prevent any scratching, I cut a small piece of fabric from disposable face mask and slipped it in between before installing onto the headset.