Poly Clone Hero Raspberry Pi Pico mount retrofit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little add-in plate for mounting a Pi Pico into a Poly Clone Hero controller by Josh Designs
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
So I decided to try and make Poly Clone Hero Controller by Josh Designs as it seemed a cool little project. But I realized after printing my parts that the original model doesn't fit a Pi Pico which I intended to use as the brains of the controller. So I searched for reference models and made a mount for it.
I printed mine 0.2mm and there's little screw holes to hold it in place. I used random small ones I had lying around. You can just glue the mount to the guitar
Hope this is useful to someone else as well and feedback is appreciated!