Poly Clone Hero Raspberry Pi Pico mount retrofit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little add-in plate for mounting a Pi Pico into a Poly Clone Hero controller by Josh Designs
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 1
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
So I decided to try and make Poly Clone Hero Controller by Josh Designs as it seemed a cool little project. But I realized after printing my parts that the original model doesn't fit a Pi Pico which I intended to use as the brains of the controller. So I searched for reference models and made a mount for it.
I printed mine 0.2mm and there's little screw holes to hold it in place. I used random small ones I had lying around. You can just glue the mount to the guitar
Hope this is useful to someone else as well and feedback is appreciated!