BoboVR M2 to M3 - Quest 3 - Printable conversion (retrofit) kit - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changed the mounting posistion more to the centre and upwards on the adaper to better match the bobovr conversion kit.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 932
- Wydruki
- 6
- Wyświetlenia
- 6800
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
First of all i want to thank the original creator for an awesome design its way better than using the generic adapters.
So i noticed i was having problems when i have the face plate in the smallest position.
I had to slide it all the way down the arms up to the usb connector but then you loose tilt options as the arms of the quest 3 hit the bobovr upper strap part.
i noticed looking at the attached image of the official retrofit kit, the mounting point is nearly in the middle so i edited it to bring the hole more into the middle to better match the official conversion kit. now it gets the headset closer to my face without loosing too much tilt ability.
Also i thought the Tpu parts where a tad too thin and they moved around too much so i beefed them up slightly which helps and also makes them a tad more durable.
Edit: Had to make V2 as it still clashes the quest 3 arms into the bobovr top strap.
Raised the hole position to give more clearance. works like a charm now :)